Skip to contentSkip to conversation

any one use 750fx/MV64360

DISCUSSION Xiaoshan Zuo 4 participants 6 messages Jan 21, 2004 – Jan 27, 2004

lore
Share & tools
lore
#0 lore raw

Hello,

We are planning design a custom board. The preferred cpu is IBM 750FX, the bridge is going to be Marvell 64360. Depending on the software support, we may alter our plan to use either 750FX/64260 or Motorola 7447/64360/64260. It seems that 64360 is not supported in stock kernel, there is galieo tree for that, but I am not sure the code is really stable. Anyone has experience using 750fx/64360? Which version of gcc/kernel/u-boot should I use? If that is not a good option, then how about 750FX/64260 or Motorola 7447/64360/64260? Any suggestions/comments will be appreciated.

Thanks,

Xiaoshan

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#1 lore raw

My 2 cents:

I happened to use all your options these years:--(.

750fx + 64260
it should be good enough if you don't have MP(Multi-CPU) demand for running smp-os on top of it. The reason is obivous: 750fx is G3. The MEI protocol may not be prefered if your system happens to be a high-end applicances.

750fx + 64360

if you do want to stay 750 and need SMP, you may have to use 64360. Check out Marvell FAE people to understand their Arbiter part, which have some fixes for SMP support. If you have legacy issue, note that some tiny porting work needed for 64360 part.

7447 + 64260
No one would go for this option

7447 + 64360

Well, G4+ MES(R)I is born to support SMP system. So, if you concern this part, do go for it. One thing you need talk to your hardware board group is: Powerp Consumption. If you guys are able to live with it, go for it:-).

Also, if you have legacy codes under IBM 750-based system, please pay high alert on driver part. For example, Out of Order issue when under Non-Cachable and Guard......One missing will make your driver all srew up. For more detail, you are welcome to talk to me.

Good luck,
Huailin Chen
www.xtrj.org

Quoted 21 lines · --- Xiaoshan Zuo

Hello,

We are planning design a custom board. The preferred cpu is IBM 750FX,
the bridge is going to be Marvell 64360. Depending on the software
support, we may alter our plan to use either 750FX/64260 or Motorola
7447/64360/64260. It seems that 64360 is not supported in stock kernel,
there is galieo tree for that, but I am not sure the code is really
stable. Anyone has experience using 750fx/64360? Which version of
gcc/kernel/u-boot should I use? If that is not a good option, then how
about 750FX/64260 or Motorola 7447/64360/64260? Any suggestions/comments
will be appreciated.

Quoted 5 lines

Thanks,

Xiaoshan

Yahoo! SiteBuilder - Free web site building tool. Try it!
http://webhosting.yahoo.com/ps/sb/

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#2 lore raw

Thanks for the comments. Those are certainly good points. What OS did you use? Any suggestions on the Linux kernel to use? BTW, your website is just interesting.

Xiaoshan

**** Huailin Chen wrote ****

Quoted 68 lines

My 2 cents:

I happened to use all your options these years:--(.

750fx + 64260
it should be good enough if you don't have MP(Multi-CPU) demand for running smp-os on top of it. The reason is obivous: 750fx is G3. The MEI protocol may not be prefered if your system happens to be a high-end applicances.

750fx + 64360

if you do want to stay 750 and need SMP, you may have to use 64360. Check out Marvell FAE people to understand their Arbiter part, which have some fixes for SMP support. If you have legacy issue, note that some tiny porting work needed for 64360 part.

7447 + 64260
No one would go for this option

7447 + 64360

Well, G4+ MES(R)I is born to support SMP system. So, if you concern this part, do go for it. One thing you need talk to your hardware board group is: Powerp Consumption. If you guys are able to live with it, go for it:-).

Also, if you have legacy codes under IBM 750-based system, please pay high alert on driver part. For example, Out of Order issue when under Non-Cachable and Guard......One missing will make your driver all srew up. For more detail, you are welcome to talk to me.

Good luck,
Huailin Chen
www.xtrj.org

Quoted 23 lines · --- Xiaoshan Zuo

Hello,

We are planning design a custom board. The preferred cpu is IBM 750FX,
the bridge is going to be Marvell 64360. Depending on the software
support, we may alter our plan to use either 750FX/64260 or Motorola
7447/64360/64260. It seems that 64360 is not supported in stock kernel,
there is galieo tree for that, but I am not sure the code is really
stable. Anyone has experience using 750fx/64360? Which version of
gcc/kernel/u-boot should I use? If that is not a good option, then how
about 750FX/64260 or Motorola 7447/64360/64260? Any suggestions/comments
will be appreciated.

Thanks,

Quoted 7 lines
Quoted 3 lines

Xiaoshan

Yahoo! SiteBuilder - Free web site building tool. Try it!
http://webhosting.yahoo.com/ps/sb/

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#3 lore raw

FYI: Free Online Book: Inside Linux Kernel and PowerPC

In reply to Xiaoshan Zuo

Hi, team,

I tried to collect some documents related to linux and ppc. And did some document(I'm not yet confident enough to say: kernel analysis) about linux ppc machine dependent part.

It's far away being good. But wish helpful and
meantime get some feedback so that I could make a
better job.

The Link is: www.xtrj.org/ppc

The ToC is:
-------------
Chapter 1 Embedded PowerPC Family
Chapter 2: Programming Model
Chapter 3: PowerPC EABI
Chapter 4: PowerPC Interrupt/Exception
Chapter 5: PowerPC 4xx Reset and Initialization
Chapter 6: Synchronization Requirements
Chapter 7: Linux Kernel Bootup and Initialization
Chapter 8: Kernel Initialization
Chapter 9: Kernel Setup---start_kernel
Chapter 10: Kernel Exception Handler
Chapter 11 Kernel Memory Management
Chapter 12: Kernel Process Management
Chapter 13 Interrupt Handling routines
Chapter 14 System Call handling
Chapter 15: PowerPC EABI Cross Compiler

Regards,

Huailin, Chen
www.xtrj.org

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#4 lore raw

Re: FYI: Free Online Book: Inside Linux Kernel and PowerPC

Huailin Chen wrote:

| The Link is: www.xtrj.org/ppc

Hi there,

I think you and I are both looking at the same thing and have similar goals so I will go through what you have put up and get in touch.

Cheers,

Jon.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#5 lore raw

Re: FYI: Free Online Book: Inside Linux Kernel and PowerPC

In reply to Huailin Chen
Quoted 2 lines · Huailin Chen

Chapter 3: PowerPC EABI
Chapter 15: PowerPC EABI Cross Compiler

Well we actually use system V ABI for linux binaries and making a cross compiler with TARGET=powerpc-linux can also use EABI with the -meabi option.

Perhaps pointing to dan kegel's crosstool would be better than invent your own way.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/