any support for realtech sound chip
Hi. I would like to use a Shuttle An50R which supports the Athlon 64 under Linux, but their sound chip is an ac97 audio Realtech. What module would support such a beast or is it not possible to use ALSA with that chip?
Thanks.
Signature · 9 lines
John Covici
[email protected]
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdnThe Realtek ALC650 rev 3 chip, in my Shuttle SB62G2, is supported by the intel8x0 driver.
HOWEVER, and I have a headache from it at this very moment, I've just learned that the driver does not support anything but the front L and R channels for output.
Can anyone tell me what is involved in evolving the driver so that it will support all 6 playback channels? Please someone tell me what I can do to help make this come to pass!
Many thanks,
John
Now to find some ibuprofen.
Quoted 12 lines · John Covici
Hi. I would like to use a Shuttle An50R which supports the Athlon 64 under Linux, but their sound chip is an ac97 audio Realtech. What module would support such a beast or is it not possible to use ALSA with that chip?
Thanks.
--
John Covici
[email protected]
Quoted 10 lines
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Alsa-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
5.1 Audio works fine on my ALC650 rev 3 chip.
I have a Intel ICH5 chip controlling it.
Try my speaker-test program from http://www.superbug.demon.co.uk/speaker-test/
Cheers
James
Quoted 11 lines · John W. Cocula
The Realtek ALC650 rev 3 chip, in my Shuttle SB62G2, is supported by the intel8x0 driver.
HOWEVER, and I have a headache from it at this very moment, I've just learned that the driver does not support anything but the front L and R channels for output.
Can anyone tell me what is involved in evolving the driver so that it will support all 6 playback channels? Please someone tell me what I can do to help make this come to pass!
Quoted 19 lines
Many thanks,
JohnNow to find some ibuprofen.
Quoted 11 lines · John Covici
Hi. I would like to use a Shuttle An50R which supports the Athlon 64 under Linux, but their sound chip is an ac97 audio Realtech. What module would support such a beast or is it not possible to use ALSA with that chip?
Thanks.
--
John Covici
[email protected]
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
Hi James,
It was your program that further confirmed that it does not work for me!
$ ./speaker-test -Drear -c 2
speaker-test 0.0.3
Playback device is rear
Stream parameters are 48000Hz, S16_LE, 2 channels
Sine wave rate is 440.0000Hz
ALSA lib pcm.c:1812:(snd_pcm_open_conf) Invalid type for PCM rear definition (id: rear, value: cards.pcm.rear)
Playback open error: Invalid argument
I'm using ALSA 1.0.1. What is different???
Thanks,
John
Quoted 5 lines · James Courtier-Dutton
5.1 Audio works fine on my ALC650 rev 3 chip.
I have a Intel ICH5 chip controlling it.
Try my speaker-test program from
http://www.superbug.demon.co.uk/speaker-test/
Quoted 39 lines
Cheers
JamesQuoted 32 lines · John W. Cocula
The Realtek ALC650 rev 3 chip, in my Shuttle SB62G2, is supported by the intel8x0 driver.
HOWEVER, and I have a headache from it at this very moment, I've just learned that the driver does not support anything but the front L and R channels for output.
Can anyone tell me what is involved in evolving the driver so that it will
support all 6 playback channels? Please someone tell me what I can do to
help make this come to pass!Many thanks,
JohnNow to find some ibuprofen.
Quoted 11 lines · John Covici
Hi. I would like to use a Shuttle An50R which supports the Athlon 64 under Linux, but their sound chip is an ac97 audio Realtech. What module would support such a beast or is it not possible to use ALSA with that chip?
Thanks.
--
John Covici
[email protected]
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
Quoted 4 lines · John W. Cocula
$ ./speaker-test -Drear -c 2ALSA lib pcm.c:1812:(snd_pcm_open_conf) Invalid type for PCM rear definition (id: rear, value: cards.pcm.rear) Playback open error: Invalid argument
You cannot access the rear channels seperately (at least not directly). The ICH only supports 2-channel (front), 4-channel (front+surround) and 6-channel (front+surr+center+lfe) output.
HTH
Clemens
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
Multichannel AC97 support - was "Re: any support for realtech sound chip"
Quoted 9 lines · Clemens Ladisch
Quoted 4 lines · John W. Cocula
$ ./speaker-test -Drear -c 2ALSA lib pcm.c:1812:(snd_pcm_open_conf) Invalid type for PCM rear definition (id: rear, value: cards.pcm.rear) Playback open error: Invalid argument
You cannot access the rear channels seperately (at least not directly). The ICH only supports 2-channel (front), 4-channel (front+surround) and 6-channel (front+surr+center+lfe) output.
This is interesting... If I understand you correctly, you mean that the digital PCM data for the 4 channels or 6 channels must all be interleaved together and sent through a single device, just like the left and right channels of a stereo channel?
If this is correct, would it be possible to set up a plug-in layer which opens the ICH hardware in 6-channel mode, but then provides three virtual stereo devices to applications?
The plugin would just interleave, or multiplex the digital pcm data together, and insert silent "0" samples on any channel which wasn't opened by an application.
Diagram: (each letter represents a 16-bit PCM sample)
pcm stereo 1: ababab... --> |========| |hardware|
pcm stereo 2: cdcdcd... --> | plugin |-->abcdefabcdef... -->|in 6 ch |
pcm stereo 3: efefef... --> |========| | mode |
My goal is to get my ICH-->realtech working in 6 channel output mode in a way that I can run three instances of Rhythmbox, streaming three totally independent stereo streams to three stereo amplifiers hooked to speakers in three different rooms :-)
Hopefully this is not impossible?
I'm willing to do some programming to make it happen, if the hardware can support it...
Torrey
Quoted 17 lines
HTH
Clemens-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Alsa-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Signature · 9 lines
Torrey Hoffman <[email protected]> ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn
Re: Multichannel AC97 support - was "Re: any support for realtech sound chip"
Quoted 30 lines · Torrey Hoffman
Quoted 9 lines · Clemens Ladisch
Quoted 4 lines · John W. Cocula
$ ./speaker-test -Drear -c 2ALSA lib pcm.c:1812:(snd_pcm_open_conf) Invalid type for PCM rear definition (id: rear, value: cards.pcm.rear) Playback open error: Invalid argument
You cannot access the rear channels seperately (at least not directly). The ICH only supports 2-channel (front), 4-channel (front+surround) and 6-channel (front+surr+center+lfe) output.
This is interesting... If I understand you correctly, you mean that the digital PCM data for the 4 channels or 6 channels must all be interleaved together and sent through a single device, just like the left and right channels of a stereo channel?
If this is correct, would it be possible to set up a plug-in layer which opens the ICH hardware in 6-channel mode, but then provides three virtual stereo devices to applications?
The plugin would just interleave, or multiplex the digital pcm data together, and insert silent "0" samples on any channel which wasn't opened by an application.
Diagram: (each letter represents a 16-bit PCM sample)
pcm stereo 1: ababab... --> |========| |hardware|
pcm stereo 2: cdcdcd... --> | plugin |-->abcdefabcdef... -->|in 6 ch |
pcm stereo 3: efefef... --> |========| | mode |
Quoted 6 lines
My goal is to get my ICH-->realtech working in 6 channel output mode in a way that I can run three instances of Rhythmbox, streaming three totally independent stereo streams to three stereo amplifiers hooked to speakers in three different rooms :-)
Hopefully this is not impossible?
No, use the dshare plugin with different channel bindings.
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
I've got an ABit MAX-3 with the ALC650 chip controlled by the Intel ICH5
(R) as well. Playback through the front channel with ALSA works fine.
My problem is that the motherboard has 5 1/8th inch mini jacks on the back, and two of those can be configured as either input or output. One may be either Microphone 1 stereo input, or output the center channel and subwoofer channel. Another may be either a stereo line input, or output the rear surround channels.
The gnome ALSA Mixer program shows options to set these (they appear as check boxes labelled "Line-In As Surround" and "Mic As Center/LFE") but selecting them doesn't seem to give me any extra output channels.
With both of those checkboxes turned on, my /proc/asound/devices still shows:
[thoffman@moria thoffman]$ cat /proc/asound/devices
0: [0- 0]: ctl
20: [0- 4]: digital audio playback
27: [0- 3]: digital audio capture
26: [0- 2]: digital audio capture
25: [0- 1]: digital audio capture
16: [0- 0]: digital audio playback
24: [0- 0]: digital audio capture
33: : timer
(Device 0-4 is the optical SPDIF output. I don't know if it works or not, I have nothing that can take optical inputs.)
If anyone out there knows how to make my six-channel sound outputs actually work, I'd be deeply appreciative.
Thanks!
Quoted 53 lines · James Courtier-Dutton
5.1 Audio works fine on my ALC650 rev 3 chip.
I have a Intel ICH5 chip controlling it.
Try my speaker-test program from
http://www.superbug.demon.co.uk/speaker-test/Cheers
JamesQuoted 11 lines · John W. Cocula
The Realtek ALC650 rev 3 chip, in my Shuttle SB62G2, is supported by the intel8x0 driver.
HOWEVER, and I have a headache from it at this very moment, I've just learned that the driver does not support anything but the front L and R channels for output.
Can anyone tell me what is involved in evolving the driver so that it will support all 6 playback channels? Please someone tell me what I can do to help make this come to pass!
Quoted 19 lines
Many thanks,
JohnNow to find some ibuprofen.
Quoted 11 lines · John Covici
Hi. I would like to use a Shuttle An50R which supports the Athlon 64 under Linux, but their sound chip is an ac97 audio Realtech. What module would support such a beast or is it not possible to use ALSA with that chip?
Thanks.
--
John Covici
[email protected]-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Alsa-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Signature · 9 lines
Torrey Hoffman <[email protected]> ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn