NAT and policy routing?
I'm confused about what might be going on here, and hope someone will be able to suggest a way of the thicket for me.
I am using a rule to route a private network to the outside world:
# ip rule show from 192.168.1.0/24 lookup bc-routes
On the router box I have this rule (public IP obfuscated):
SNAT all -- 192.168.1.0/24 0.0.0.0/0 to:111.11.11.1111
I can ssh out of any of the boxes on 192.168.1.0 just fine, and the other end sees me coming in from the public address above. But the Vonage phones that are on that network somehow seem to be eluding the rule:
Quoted 3 lines
14:10:15.050505 192.168.1.11.5062 > 64.157.171.19.5061: udp 430 [tos
0x68] 14:10:15.284244 192.168.1.9.5063 > 12.144.47.27.5060: udp 412 [tos0x68] 14:10:16.443637 192.168.1.6.5060 > 12.144.47.27.5060: udp 411 [tos0x68]
I know the ssh sessions are TCP and the Vonage units are (obviously) using UDP. I wonder what I'm misunderstanding?
Earlier, on another machine that was using "plain old routing" instead of the rule/table method, the Vonage units worked just fine.
Thanks in advance for any help that might be out there.
B.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/