Skip to contentSkip to conversation

kernel bootparams

U-Boot-Users himbA 2 participants 3 messages Feb 11, 2004 – Feb 12, 2004

lore
Share & tools
lore

himbA

author
#0 lore raw

Hello

I have a board, pxa based, and it has u-boot burnt, but i don't have the source from which it was compiled from, so i don't have any config setting (got the board as-is).

for now booting is made from flash, loading both kernel and ramdisk. i want to try nfs based booting and first strange thing i notice when kernel gets booted is that kernel parameters are always the same, no matter to what i set 'bootargs' var in u-boot. it always displays
....
Kernel command line: root=/dev/ram0 console=ttyS0,115200 mem=64M
....
and hangs at
....
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com

Kernel panic: VFS: Unable to mount root fs on 01:00

although passed bootargs says:
bootargs=root=/dev/nfs rw nfsroot=10.10.10.1:/tftpboot/10.10.10.1 ip=10.10.10.2:10.10.10.1::255.255.255.0:xcep:: console=ttyS0,115200 mem=64M

I also tried changing CONFIG_CMDLINE setting in .config of the kernel to same value as bootargs but still notihng changed.

If CONFIG_BOOTARGS var in u-boot is specified during compile time, does it interfere with bootargs passed at boot time ?

i will copile u-boot from CVS tomorrow (need to create new board defines), just need to clear some stuff now...

regards, himba

#1 lore raw
Quoted 4 lines · In message <[email protected]> you wrote:

I have a board, pxa based, and it has u-boot burnt, but i don't have the source from which it was compiled from, so i don't have any config setting (got the board as-is).

Then request the source from the guys who gave/sold you the board. U-Boot is under GPL and they MUST give you the full source code, including all modifications they might have made, _ffor_free_.

Quoted 4 lines

for now booting is made from flash, loading both kernel and ramdisk. i want to try nfs based booting and first strange thing i notice when kernel gets booted is that kernel parameters are always the same, no matter to what i set 'bootargs' var in u-boot. it always displays

Probably the kernel uses it's own bootstrap loader which includes a hard-wired command line.

Quoted 5 lines

I also tried changing CONFIG_CMDLINE setting in .config of the kernel to same value as bootargs but still notihng changed.

If CONFIG_BOOTARGS var in u-boot is specified during compile time, does it interfere with bootargs passed at boot time ?

No, this is just the default value which can be overwritten by the standard setenv command.

Quoted 2 lines

i will copile u-boot from CVS tomorrow (need to create new board defines), just need to clear some stuff now...

Complain at the guys who gave you the board!!

Best regards,

Wolfgang Denk

Signature · 6 lines
See us @ Embedded World, Nuremberg, Feb 17 - 19,  Hall 12.0 Booth 440
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
"I knew then (in 1970) that a 4-kbyte minicomputer would cost as much
as a house. So I reasoned  that  after  college,  I'd  have  to  live
cheaply in an apartment and put all my money into owning a computer."
      - Apple co-founder Steve Wozniak, EE Times, June 6, 1988, pg 45
author
#2 lore raw

i apoligize since i sent first reply to Wolfgang Denk only, my mail client tricked me :)

Quoted 11 lines · Wolfgang Denk
Quoted 3 lines · In message <[email protected]> you wrote:

I have a board, pxa based, and it has u-boot burnt, but i don't have the source from which it was compiled from, so i don't have any config setting (got the board as-is).

Then request the source from the guys who gave/sold you the board. U-Boot is under GPL and they MUST give you the full source code, including all modifications they might have made, _ffor_free_.

got it today, the forgot to include on the cd they gave me.

Quoted 9 lines
Quoted 5 lines

for now booting is made from flash, loading both kernel and ramdisk. i want to try nfs based booting and first strange thing i notice when kernel gets booted is that kernel parameters are always the same, no matter to what i set 'bootargs' var in u-boot. it always displays

Probably the kernel uses it's own bootstrap loader which includes a hard-wired command line.

and how could i tell if such bootstrap loader exists ? as far as i know there is nothing present on flash except u-boot and u-boot env.

Quoted 5 lines
Quoted 5 lines

I also tried changing CONFIG_CMDLINE setting in .config of the kernel to same value as bootargs but still notihng changed.

Quoted 7 lines
Quoted 2 lines

If CONFIG_BOOTARGS var in u-boot is specified during compile time, does it interfere with bootargs passed at boot time ?

No, this is just the default value which can be overwritten by the standard setenv command.

ok, that means kernel line supplied to the kernel is hardwired, i guess, somewhere else.

Quoted 7 lines
Quoted 3 lines

i will copile u-boot from CVS tomorrow (need to create new board defines), just need to clear some stuff now...

Complain at the guys who gave you the board!!

i did, and i got it - but they have 1.0.0 sources ported and said they tried porting cvs version, but had some problems.
are there major changes from 1.0.0 and current cvs (1.0.2)? it is only a patch revision according to numbering in README as I recall, so how different could it be.

Quoted 4 lines

Best regards,

Wolfgang Denk

thank, you

regards, himba