Skip to contentSkip to conversation

Maximizing and maintaining fragmentation

DISCUSSION Timothy Miller 2 participants 2 messages Feb 13, 2004 – Feb 14, 2004

lore
Share & tools
lore
#0 lore raw

A colleague and I are doing some experiments, and we are attempting to model the layout of the filesystem on our server at work. We're using that model because of certain challenges with the very deep directory structure.

We are copying about 30GB to one of our personal computers here on the LAN and in order to introduce file fragmentation (to simulate what is probably the case in the working environment), we are running 3 tar pipes at the same time.

(Interesting: the combination of the disk access and the built-in NIC on the ABIT KV7 make the kernel use about 70% of the CPU, and user space is using all of the rest. We're only doing 100 megabit ethernet, so what gives?)

Now, since the actual data is proprietary, we want to run a program on the data after we've copied it which will scramble the actual file contents before we remove it from the building (we are not concerned about compressibility). But we do not want to alter the structure of the data on disk in any other way. If the scrambler were to determine the file size of the original file, write out random data of that same size, and then copy the new file over the old one, that would likely reduce or eliminate the fragmentation.

My proposal is to open and mmap each file and scramble the data by writing to the file in virtual memory. When the file is unmapped and closed, I am assuming that the new data will get written to the same physical locations on disk as the original file.

IMPORTANT QUESTION: When writing to an mmap'ed file, will ext3 rearrange blocks on disk in order to reduce fragmentation, or will it leave the blocks exactly where they are, just overwriting the data?

Thanks.

#1 lore raw
Quoted 4 lines · Timothy Miller

IMPORTANT QUESTION: When writing to an mmap'ed file, will ext3
rearrange blocks on disk in order to reduce fragmentation, or will it leave the blocks exactly where they are, just overwriting the data?

The blocks will not change.