Skip to contentSkip to conversation

IO-APIC + timer

DISCUSSION Josef Möllers 1 participant 1 message Feb 19, 2004

lore
Share & tools
lore
#0 lore raw

Hello Ingo,

Can you help? I've tried reaching bugzilla.redhat.com, but didn't connect.

We have a problem with a IO-APIC + timer on a RedHat Linux 2.4.21 kernel:

ESR value after enabling vector: 00000000
Calibrating delay loop... 6107.95 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
Total of 2 processors activated (6945.17 BogoMIPS). ENABLING IO-APIC IRQs
Setting 7 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 7 ... ok. Setting 8 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 8 ... ok. Setting 9 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 9 ... ok. ..TIMER: vector=0x31 pin1=2 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ... failed.
timer doesn't work through the IO-APIC - disabling NMI Watchdog! ...trying to set up timer as Virtual Wire IRQ... failed. ...trying to set up timer as ExtINT IRQ... failed :(. Kernel panic: IO-APIC + timer doesn't work! pester [email protected] In idle task - not syncing

The hardware is

Northbridge: Intel E7505 Chipset, Plumas
Southbridge: Intel ICH3S
Super-I/O: NS PC87366/VLA
FWH: SST 49LF004A
Giga-LAN: Intel 82546EB
SCSI: Adaptec 7902
Processors: 2 X Prestonia processors, 533 MHz FSB, 2.8
GHz -
3.2 GHz
Memory: 1 - 6 registered DIMMs, PC2100R, DDR 266
Video: ATI Rage XL

Thanks in advance,

Josef

Signature · 3 lines
Josef Möllers (Pinguinpfleger bei FSC)
	If failure had no penalty success would not be a prize
						-- T.  Pratchett