Skip to contentSkip to conversation

2.6.3 RT8139too NIC problems

DISCUSSION Nick Warne 1 participant 1 message Feb 19, 2004

lore
Share & tools
lore

Nick Warne

author
#0 lore raw
Quoted 9 lines

So, corrected (and as the kernel was built):

# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_8139_RXBUF_IDX=2

OK, I think there _is_ a problem here. I was suspecting my NFS setup maybe causing the NIC (eth0) to timeout and get reset, as I mount files from an old 486 -> 2.6.3 box.

But after messing about a bit, I checked the logs on my 2.4.24 box via SSH (AND eth1). It hung as issued #> pico /var/log/messages for about 3 seconds.. then came to life. So...

... in the logs on 2.6.3 box straight after:

Feb 19 19:33:13 Linux233 kernel: NETDEV WATCHDOG: eth1: transmit 
timed out
Feb 19 19:33:13 Linux233 kernel: eth1: link up, 10Mbps, half-duplex, 

lpa 0x0000

Nick

Signature · 2 lines
"I am not Spock", said Leonard Nimoy.
"And it is highly illogical of humans to assume so."