Skip to contentSkip to conversation

New board support for the Xilinx ML300 platform

PATCH New Peter Ryser 3 participants 17 messages Feb 21, 2004 – Feb 24, 2004

lore
Share & tools
lore

Peter Ryser

author
#0 lore raw

PATCH 1/1 New board support for the Xilinx ML300 platform

At ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.patch.gz find a patch that adds support for the Xilinx ML300 platform to U-Boot. Some documentation is provided in doc/README.ml300.

The CHANGELOG entry is attached to this email.

Please apply the patch to the repository.

Thanks and with best regards,
- Peter

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: CHANGELOG
Url: http://lists.denx.de/pipermail/u-boot/attachments/20040220/3d002a47/attachment.txt

#2 lore raw

PATCH 1/1 New board support for the Xilinx ML300 platform

Quoted 7 lines · In message <[email protected]> you wrote:

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type"> <title></title>
</head>
<body bgcolor="#ffffff" text="#000000">

Please do not send HTML messages.

Please send plain text only.

Message unreadable, ignored. Sorry.

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
I think there's a world market for about five computers.
         -- attr. Thomas J. Watson (Chairman of the Board, IBM), 1943
author
#3 lore raw

PATCH 1/1 New board support for the Xilinx ML300 platform

Wolfgang et al.,

here is the relevant message in plain text:

At ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.patch.gz find a patch that adds support for the Xilinx ML300 platform to U-Boot. Some documentation is provided in doc/README.ml300.

The CHANGELOG entry follows further down.

Please apply the patch to the repository.

Thanks and with best regards,
- Peter

CHANGELOG entry:

* Patch by Peter Ryser, 20 Feb 2004:
Add support for the Xilinx ML300 platform
(http://www.xilinx.com/ml300).

Quoted 26 lines · Wolfgang Denk
Quoted 9 lines · In message <[email protected]> you wrote:

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type"> <title></title>
</head>
<body bgcolor="#ffffff" text="#000000">

Please do not send HTML messages.

Please send plain text only.

Message unreadable, ignored. Sorry.

Wolfgang Denk

#4 lore raw

PATCH 1/1 New board support for the Xilinx ML300 platform

In reply to Mike Welliington
Quoted 56 lines · Mike Welliington

Great! - I've been working on a port of PPCBoot to the ML300, but got yanked off to work on our kernel port, which we are booting without a bootloader for the time being. But I knew I was going to have to come back and finish the port anyway - you just saved me.

I'm new to U-Boot so:

1) Is this patch intended to be applied to U-Boot 1.0.0 ?

2) Where can I find out how to apply the patch?

Best Regards,

-mike wellington
wellington at lucent.com
Denver, Colorado, USA

Quoted 8 lines · Peter Ryser

At ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.patch.gz find a patch that adds support for the Xilinx ML300 platform to U-Boot. Some documentation is provided in doc/README.ml300.

The CHANGELOG entry is attached to this email.

Please apply the patch to the repository.

Quoted 15 lines

Thanks and with best regards,
- Peter

------------------------------------------------------------------------

* Patch by Peter Ryser, 20 Feb 2004:
Add support for the Xilinx ML300 platform
(http://www.xilinx.com/ml300).

------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________ U-Boot-Users mailing list U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

#5 lore raw

PATCH 1/1 New board support for the Xilinx ML300 platform

Quoted 9 lines · In message <[email protected]> you wrote:
Quoted 9 lines

Great! - I've been working on a port of PPCBoot to the ML300, but got yanked off to work on our kernel port, which we are booting without a bootloader for the time being. But I knew I was going to have to come back and finish the port anyway - you just saved me.

I'm new to U-Boot so:

1) Is this patch intended to be applied to U-Boot 1.0.0 ?

No, more likely to a recent version like 1.0.2 or top-of-tree.

Quoted 1 line
Quoted 1 line

2) Where can I find out how to apply the patch?

Type: "man patch".

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Karl's version of Parkinson's Law: Work expands to  exceed  the  time
alloted it.
#6 lore raw

PATCH 1/1 New board support for the Xilinx ML300 platform

How do I get the top-of-tree?

-mike

Quoted 4 lines · Wolfgang Denk

No, more likely to a recent version like 1.0.2 or top-of-tree.

#7 lore raw

PATCH 1/1 New board support for the Xilinx ML300 platform

Quoted 1 line · In message <[email protected]> you wrote:

How do I get the top-of-tree?

"cvs checkout" ? See http://www.cvshome.org/docs/manual/cvs-1.11.13/cvs.html

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Many aligators will be slain, but the swamp will remain.
#8 lore raw

[U-Boot-Users] Re: U-Boot 1.0.2 sources

In reply to Mike Wellington

Never mind. I found the 1.0.2 tar ball.
Downloading now...

-mike w..

Quoted 22 lines · Mike Wellington

How do I get the top-of-tree?

-mike

Quoted 4 lines · Wolfgang Denk

No, more likely to a recent version like 1.0.2 or top-of-tree.

-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

#9 lore raw

[U-Boot-Users] Re: U-Boot 1.0.2 sources

Quoted 2 lines · In message <[email protected]> you wrote:

Never mind. I found the 1.0.2 tar ball.
Downloading now...

You should learn to use CVS nevertheless.

Best regards,

Wolfgang Denk

Signature · 5 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Shakespeare's Law of Prototyping: (Hamlet III, iv, 156-160)
        O, throw away the worser part of it,
        And live the purer with the other half.
author
#11 lore raw

PATCH 1/1 New board support for the Xilinx ML300 platform

In reply to Mike Welliington

Mike,

the patch applies cleanly against the latest CVS kernel tree. After checking out the CVS tree from sourceforge (see
http://sourceforge.net/cvs/?group_id=65938 for instructions, use u-boot as modulename) change into the root directory of U-Boot and do:

$ gzip -cd ml300.patch.gz | patch -p1 -F0 --dry-run

If that goes well remove --dry-run to really apply the patch.

- Peter

Quoted 56 lines · Mike Welliington

Great! - I've been working on a port of PPCBoot to the ML300, but got yanked off to work on our kernel port, which we are booting without a bootloader for the time being. But I knew I was going to have to come back and finish the port anyway - you just saved me.

I'm new to U-Boot so:

1) Is this patch intended to be applied to U-Boot 1.0.0 ?

2) Where can I find out how to apply the patch?

Best Regards,

-mike wellington
wellington at lucent.com
Denver, Colorado, USA

Quoted 8 lines · Peter Ryser

At ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.patch.gz find a patch that adds support for the Xilinx ML300 platform to U-Boot. Some documentation is provided in doc/README.ml300.

The CHANGELOG entry is attached to this email.

Please apply the patch to the repository.

Quoted 15 lines

Thanks and with best regards,
- Peter

------------------------------------------------------------------------

* Patch by Peter Ryser, 20 Feb 2004:
Add support for the Xilinx ML300 platform
(http://www.xilinx.com/ml300).

------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________ U-Boot-Users mailing list U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

#12 lore raw

PATCH 1/1 New board support for the Xilinx ML300 platform

Peter-
Thanks. I had already applied the patch incorrectly and mangled my
build tree.
But I re-un-hacked it and I am now building u-boot for the ML300. I have
downloaded it and it is running right now. If I start having
unexplainable problems
I'll start fresh with the latest top-of-tree and re-apply the patch according to
your instructions.

All I need to do is to figure out how to set the ethernet address (no help needed here)
and download my kernel which is already built.

I may be gone for an hour or two - getting hungry, may walk over to CB & Potts for
dinner but I'll be back.

Thanks a million!

-mike

Quoted 86 lines · Peter Ryser

Mike,

the patch applies cleanly against the latest CVS kernel tree. After checking out the CVS tree from sourceforge (see
http://sourceforge.net/cvs/?group_id=65938 for instructions, use u-boot as modulename) change into the root directory of U-Boot and do:

$ gzip -cd ml300.patch.gz | patch -p1 -F0 --dry-run

If that goes well remove --dry-run to really apply the patch.

- Peter

Quoted 50 lines · Mike Welliington

Great! - I've been working on a port of PPCBoot to the ML300, but got yanked off to work on our kernel port, which we are booting without a bootloader for the time being. But I knew I was going to have to come back and finish the port anyway - you just saved me.

I'm new to U-Boot so:

1) Is this patch intended to be applied to U-Boot 1.0.0 ?

2) Where can I find out how to apply the patch?

Best Regards,

-mike wellington
wellington at lucent.com
Denver, Colorado, USA

Quoted 11 lines · Peter Ryser

At ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.patch.gz find a patch that adds support for the Xilinx ML300 platform to U-Boot. Some documentation is provided in doc/README.ml300.

The CHANGELOG entry is attached to this email.

Please apply the patch to the repository.

Thanks and with best regards,
- Peter

Quoted 13 lines

------------------------------------------------------------------------

* Patch by Peter Ryser, 20 Feb 2004:
Add support for the Xilinx ML300 platform
(http://www.xilinx.com/ml300).

Quoted 7 lines

------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________ U-Boot-Users mailing list U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

Signature · 4 lines
=mike wellington
wellington at lucent.com
303.920.6412  Desk
720.434.7559  Cell
#13 lore raw

PATCH 1/1 New board support for the Xilinx ML300 platform

In reply to Peter Ryser
Quoted 4 lines · In message <[email protected]> you wrote:

At ftp://customer:xilinx at ftp.xilinx.com/upload/ml300.patch.gz find a patch that adds support for the Xilinx ML300 platform to U-Boot. Some documentation is provided in doc/README.ml300.

I understand this is the same patch you sent before which got rejected because of the list's attachment size limit?

Can you please verify that the code in CVS is complete and up to date?

Thanks.

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
"In matters of principle, stand like a rock;  in  matters  of  taste,
swim with the current."                            - Thomas Jefferson
author
#14 lore raw

PATCH 1/1 New board support for the Xilinx ML300 platform

Quoted 3 lines

I understand this is the same patch you sent before which got rejected because of the list's attachment size limit?

Yes, that's correct.

Quoted 2 lines

Can you please verify that the code in CVS is complete and up to date?

I just did an update as well as a complete checkout and cannot (yet?) see the code. I will try again later.

- Peter

#15 lore raw

PATCH 1/1 New board support for the Xilinx ML300 platform

Dear Peter,

Quoted 5 lines · in message <[email protected]> you wrote:
Quoted 4 lines

I understand this is the same patch you sent before which got rejected because of the list's attachment size limit?

Yes, that's correct.

Thanks for the confirmation.

Quoted 4 lines
Quoted 2 lines

Can you please verify that the code in CVS is complete and up to date?

I just did an update as well as a complete checkout and cannot (yet?) see the code. I will try again later.

Please do. Updates and access to SourceForge's anonymous server is always awfully slow.

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Is the glass half empty, half full, or twice as large as it needs to
author
#16 lore raw

PATCH 1/1 New board support for the Xilinx ML300 platform

Hi Wolfgang,

the code for the Xilinx ML300 checks out, compiles, and works as expected.

Thanks,
- Peter

Quoted 14 lines
Quoted 4 lines

I just did an update as well as a complete checkout and cannot (yet?) see the code. I will try again later.

Please do. Updates and access to SourceForge's anonymous server is always awfully slow.

Best regards,

Wolfgang Denk