Skip to contentSkip to conversation

Promise TX2plus PATA port?

DISCUSSION Boszormenyi Zoltan 2 participants 3 messages Feb 23, 2004 – Feb 24, 2004

lore
Share & tools
lore
#0 lore raw

Hi,

how can I make it work? The BIOS recognizes the drive (jumpered as master) but 2.6.3-mm2 does not. Device id is 0x3373. pdc202xx_new, pdc202xx_old and sata_promise drivers
are compiled in. Motherboard is an MSI K8T Neo FIS2R. The 120GB Samsung and the Sony CRX300E DVD/CDRW combo are recognized by both the BIOS and the kernel.

Signature · 6 lines
Best regards,
Zoltán Böszörményi

---------------------
What did Hussein say about his knife?
One in Bush worth two in the hand.
#1 lore raw

Boszormenyi Zoltan írta:

Quoted 8 lines

Hi,

how can I make it work? The BIOS recognizes the drive (jumpered as master) but 2.6.3-mm2 does not. Device id is 0x3373. pdc202xx_new, pdc202xx_old and sata_promise drivers
are compiled in. Motherboard is an MSI K8T Neo FIS2R. The 120GB Samsung and the Sony CRX300E DVD/CDRW combo are recognized by both the BIOS and the kernel.

Needless to say that those devices are attached to the VIA IDE ports, that works OK. BTW all PATA and SATA host drivers are compiled in. The Promise SATA378 TX2plus PATA port still does not work.

Signature · 6 lines
Best regards,
Zoltán Böszörményi

---------------------
What did Hussein say about his knife?
One in Bush worth two in the hand.
#2 lore raw
In reply to Boszormenyi Zoltan
Quoted 6 lines · Boszormenyi Zoltan

how can I make it work? The BIOS recognizes the drive (jumpered as master) but 2.6.3-mm2 does not. Device id is 0x3373. pdc202xx_new, pdc202xx_old and sata_promise drivers
are compiled in. Motherboard is an MSI K8T Neo FIS2R. The 120GB Samsung and the Sony CRX300E DVD/CDRW combo are recognized by both the BIOS and the kernel.

I (or somebody) needs to add PATA support for that device. Unfortunately they put both PATA and SATA on the same PCI device.

Jeff