2.6.3-mmX locks up reading scratched SVCD
Hi,
I have a scratched SVCD and reading it back with vcdimager-0.7.14 locks up the machine completely. I tried it with kernels is 2.6.3-mm[1234]. I have not tried older kernel.
A flawless SVCD can be read back. I also tried reading back a bad overburned SVCD, (cdrdao-1.1.8 reported error at the end) and it also locked up the machine. I fixated this disk, tried reading back -> lockup.
Two IDE CD-RWs produce the same effect: LG 52/24/52 and Sony 48/24/48. Something must be bad in the ide-cd driver, it should at least report an error instead of locking up.
Signature · 6 lines
Best regards, Zoltán Böszörményi --------------------- What did Hussein say about his knife? One in Bush worth two in the hand.
Quoted 6 lines · Boszormenyi Zoltan
Hi,
I have a scratched SVCD and reading it back with vcdimager-0.7.14 locks up the machine completely. I tried it with kernels is 2.6.3-mm[1234]. I have not tried older kernel.
Quoted 7 lines
A flawless SVCD can be read back. I also tried reading back a bad overburned SVCD,
(cdrdao-1.1.8 reported error at the end) and it also locked up the machine. I fixated this disk, tried reading back -> lockup.
Two IDE CD-RWs produce the same effect: LG 52/24/52 and Sony 48/24/48. Something must be bad in the ide-cd driver, it should at least report an error instead of locking up.
With damaged media, the problem is often the hardware locking up. In that case there's really not much the kernel can do. That said, does the keyboard LED's blink when the machine hangs?
Signature · 1 line
Jens Axboe