Skip to contentSkip to conversation

return value of snd_pcm_hw_params_set_rate_near

DISCUSSION Doug McLain 3 participants 4 messages Mar 1, 2004

lore
Share & tools
lore
#0 lore raw

According to the alsa documentation, the return value of snd_hw_params_set_rate_near is the 'approximate chosen rate', and the 3rd arg being type 'int'. The two tutorials at the documentation section of the alsa-project website both hold true to this with code like:

exact_rate = snd_pcm_hw_params_set_rate_near(pcm_handle, hwparams, rate, &dir);
if (dir != 0) {
fprintf(stderr, "The rate %d Hz is not supported by your hardware.\n
==> Using %d Hz instead.\n", rate, exact_rate);
}

After unsuccesful attempts at using this function this way (I'm learning linux audio software devel starting with alsa drivers and user interface), I went into the aplay source and found the version that tests a before and after version of arg 3 (which is a pointer to int that gets changed to the result rate by the function) and tests the return only for err. I assume this function changed? Im at the learning stage so I'm probably stating the obvious, but when your new sometimes reassurance from someone that knows helps. Is the documentaion just behind, or did this slip by unnoticed? Curious...

---

http://nostar.isa-geek.com

-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click

#1 lore raw
Quoted 13 lines · Doug McLain

According to the alsa documentation, the return value of snd_hw_params_set_rate_near is the 'approximate chosen rate', and the 3rd arg being type 'int'. The two tutorials at the documentation section of the alsa-project website both hold true to this with code like:

exact_rate = snd_pcm_hw_params_set_rate_near(pcm_handle, hwparams, rate, &dir);
    if (dir != 0) {
      fprintf(stderr, "The rate %d Hz is not supported by your hardware.\n 
                       ==> Using %d Hz instead.\n", rate, exact_rate);
    }
Quoted 9 lines

After unsuccesful attempts at using this function this way (I'm learning linux audio software devel starting with alsa drivers and user interface), I went into the aplay source and found the version that tests a before and after version of arg 3 (which is a pointer to int that gets changed to the result rate by the function) and tests the return only for err. I assume this function changed? Im at the learning stage so I'm probably stating the obvious, but when your new sometimes reassurance from someone that knows helps. Is the documentaion just behind, or did this slip by unnoticed? Curious...

Yes, the new functions returns value in function parameter not result.

Can you post me URL on the ALSA website, where this information is not updated?

Jaroslav

-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs

-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click

#2 lore raw

http://www.alsa-project.org/alsa-doc/alsa-lib/group___p_c_m___h_w___params.html#a58

Thanks for the reply...

P.S. I was mistaken, the doc does in fact define arg 3 as 'pointer to int' and describes the action. The return value is the only problem.

Quoted 30 lines · Jaroslav Kysela
Quoted 10 lines · Doug McLain

According to the alsa documentation, the return value of snd_hw_params_set_rate_near is the 'approximate chosen rate', and the 3rd arg being type 'int'. The two tutorials at the documentation section of the alsa-project website both hold true to this with code like:

exact_rate = snd_pcm_hw_params_set_rate_near(pcm_handle, hwparams, rate, &dir);
   if (dir != 0) {
     fprintf(stderr, "The rate %d Hz is not supported by your hardware.\n 
                      ==> Using %d Hz instead.\n", rate, exact_rate);
   }
Quoted 3 lines

After unsuccesful attempts at using this function this way (I'm learning linux audio software devel starting with alsa drivers and user interface), I went into the aplay source and found the version that tests a before and after version of arg 3 (which is a pointer to int that gets changed to the result rate by the function) and tests the return only for err. I assume this function changed? Im at the learning stage so I'm probably stating the obvious, but when your new sometimes reassurance from someone that knows helps. Is the documentaion just behind, or did this slip by unnoticed? Curious...

Yes, the new functions returns value in function parameter not result.

Can you post me URL on the ALSA website, where this information is not updated?

Jaroslav

-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs

Quoted 12 lines

-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Alsa-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click

#3 lore raw
In reply to Doug McLain
Quoted 13 lines · Doug McLain

According to the alsa documentation, the return value of snd_hw_params_set_rate_near is the 'approximate chosen rate', and the 3rd arg being type 'int'. The two tutorials at the documentation section of the alsa-project website both hold true to this with code like:

exact_rate = snd_pcm_hw_params_set_rate_near(pcm_handle, hwparams, rate, &dir);
    if (dir != 0) {
      fprintf(stderr, "The rate %d Hz is not supported by your
      hardware.\n                      ==> Using %d Hz instead.\n",
      rate, exact_rate);
    }
Quoted 9 lines

After unsuccesful attempts at using this function this way (I'm learning linux audio software devel starting with alsa drivers and user interface), I went into the aplay source and found the version that tests a before and after version of arg 3 (which is a pointer to int that gets changed to the result rate by the function) and tests the return only for err. I assume this function changed? Im at the learning stage so I'm probably stating the obvious, but when your new sometimes reassurance from someone that knows helps. Is the documentaion just behind, or did this slip by unnoticed? Curious...

The function was changed some time ago, along with a few other similar cases.

Signature · 10 lines
Måns Rullgård
[email protected]



-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click