Bluez on Axis DevBoard 82
Hi Tobias,
At your institute we are also trying to use an axis devboard to experiment with bluetooth applications. One of the primary goals is to get Bluez running on the board
Quoted 7 lines
we need help to compile and install Bluez on the Axis Devboard 82 with > a cross-compiler.
The DevBoard-Software is running on our computer and we flashed the new kernel on the DevBoard successful.
We solved the kernel part of bluez as well, but we don't know, how to configure and install the other parts.
I suppose you mean that you made the Kernel USB-ready for a USB Bluettooth adapter?
Quoted 5 lines
We need the packages bluez-libs, -utils, -sdp and -pan on the DevBoard.
Can somebody give as an example for how to compile such a package with cris-gcc?
To my knowledge (and according to axis) there is no straightforward way to do this. The libs, I got to compile, but they do you no good all by themselves. I for my part have tried to autocompile the libs, utils etc with no luck for axis (using command-line lib invocation, config.site an shell parameters the way Marcel suggests). The only way I have found to work is to manually write a makefile from scratch which will then compile hciattach, hcitool... hcid poses a problem because of the need for ybison to parse the conf file.
At this point the trouble is to get these things to compile using the axis top-level makefile so that the binaries may be flashed to the board and be used as applications
greets, Eric
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel