ACPI with Elitegroup L7VMM3 motherboard

Hello!

I have a few questions about using ACPI on the L7VMM3 motherboard (VIA KM 266 chip set) (with 1600MHz AMD mobile AMD Athlon(tm) XP-M 1900+ Processor, 223M RAM)

The bios is:

# biosinfo
Following DMI entries found:
 - Mainboard vendor:   "ECS"
 - Mainboard type:     "L7VMM3"
 - Mainboard revision: "3.1"
 - BIOS vendor:        "American Megatrends Inc."
 - BIOS version:       "07.00T"
 - BIOS release:       "04/02/01"

The kernel is 2.4.25 plus acpi-20040220-2.4.25.diff.bz2 plus software suspend.

When I load the thermal, processor and fan modules, I get the following directory struction in /proc/acpi:

# tree
.
|-- alarm
|-- dsdt
|-- embedded_controller
|-- event
|-- fadt
|-- fan
|-- info
|-- power_resource
|   |-- FDDP
|   |   `-- state
|   |-- LPTP
|   |   `-- state
|   |-- URP1
|   |   `-- state
|   `-- URP2
|       `-- state
|-- processor
|   `-- CPU1
|       |-- info
|       |-- limit
|       |-- performance
|       |-- power
|       `-- throttling
|-- sleep
`-- thermal_zone

10 directories, 15 files

The are no files in the fan and the thermal_zone directory.

Is this correct?

I would be interested in controlling the fan by measuring the cpu temperature. Is this possible with this board?

Thank you for your help.

Best regards,
Joachim

-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click