usb-storage
Hello,
i would like to understand how hotplugging works, i did some experiments but without success.
If i did understand well, when i connect an usb-disk the script /etc/hotplug/usb/usb-storage should be fired... but this doesn't seem to happen.
I put a line inside it ( echo "test" >/tmp/test ) but the file is never created when i plug or unplug my usb-disk.
Why?
Thank you,
Luca
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
This could be a configuration problem. Udev release 21, sysfs should be mounted, udev rules in /etc/udev/udev.rules etc. Also, a valid rule in udev.rules which would program your usb-storage device.
I was seeing the same problem but as I installed the above programs, it went away.
--
Atul
-------------------------------------------------------------P.S: All opinions are my personal opinion(s) & responsibility and do not represent the view of my employer ( Intel Corporation ).
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Luca T.
Sent: Tuesday, March 09, 2004 9:11 AM
To: [email protected]
Subject: usb-storage
Hello,
i would like to understand how hotplugging works, i did some experiments
but without success.
If i did understand well, when i connect an usb-disk the script /etc/hotplug/usb/usb-storage should be fired... but this doesn't seem to
happen.
I put a line inside it ( echo "test" >/tmp/test ) but the file is never created when i plug or unplug my usb-disk.
Why?
Thank you,
Luca
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id70&alloc_id638&opÌk
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
Quoted 7 lines · Atul
This could be a configuration problem. Udev release 21, sysfs should be mounted, udev rules in
/etc/udev/udev.rulesetc. Also, a valid rule in udev.rules which would program your usb-storage device.I was seeing the same problem but as I installed the above programs, it went away.
Hmmm,
i don't have this udev thing nor sysfs mounted (i believe, not sure). (Btw, i am running Mandrake 9.2)
So... i do not have udev nor sysfs but still, when i plug my usb-webcam, a new icon appears on my desktop. This means that in some way mandrake is doing it. I just want to understand how this is happening to make my custom scripts run instead.
Since i have /etc/hotplug i thought this was how.
Any idea?
Thanx,
Luca
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
Quoted 6 lines · Luca T.
Hello,
i would like to understand how hotplugging works, i did some experiments but without success.
If i did understand well, when i connect an usb-disk the script/etc/hotplug/usb/usb-storageshould be fired... but this doesn't seem to happen.
What kernel are you using?
Quoted 3 lines
I put a line inside it ( echo "test" >/tmp/test ) but the file is never created when i plug or unplug my usb-disk.
Why?
On 2.4 that script would only be run when the driver is first loaded. When the device is removed, the driver is never unloaded.
thanks,
greg k-h
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
Ok,
as Greg suggested the script is fired only the first time an usb-disk is plugged in.
I verified this by unloading the usb-storage kernel module and then plugging in an usb-disk. The script has been executed correctly. Now, i need a way to detect when an usb-disk is plugged in and out, not only the first time, but everytime this happens.
I noticed that not only the usb-storage module isn't unloaded when the usb-disk is removed but it also leaves the device-file (for instance /dev/sda). So i have no way to know when the disk is removed :(
Any idea that could help me?
Thank you again,
Luca
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
Quoted 7 lines · Luca T.
Ok,
as Greg suggested the script is fired only the first time an usb-disk is plugged in.
I verified this by unloading the usb-storage kernel module and then plugging in an usb-disk. The script has been executed correctly. Now, i need a way to detect when an usb-disk is plugged in and out, not only the first time, but everytime this happens.
You will get a scsi event every time this happens, but this is only in the 2.6 kernel. 2.4 does not support this.
Quoted 3 lines
I noticed that not only the usb-storage module isn't unloaded when the usb-disk is removed but it also leaves the device-file (for instance
/dev/sda). So i have no way to know when the disk is removed :(
Only udev manages the /dev entries, unless you are using devfs. I'm guessing you aren't using udev or devfs? If so, the device nodes are always there.
Hope this helps,
greg k-h
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
Quoted 5 lines · Greg KH
You will get a scsi event every time this happens, but this is only in
the 2.6 kernel. 2.4 does not support this.
:(
Quoted 5 lines
Only udev manages the /dev entries, unless you are using devfs. I'm guessing you aren't using udev or devfs? If so, the device nodes are always there.
I'm using devfs, the device-files are dinamically created and removed... beside for the usb-disks, they are dinamically created, but not removed once the device has been unplugged :(
Thanx,
Luca
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
Quoted 3 lines · Luca T.
I'm using devfs, the device-files are dinamically created and removed... beside for the usb-disks, they are dinamically created, but not removed once the device has been unplugged :(
Then go bug the devfs developers :)
Good luck,
greg k-h
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
Quoted 22 lines · Greg KH
Quoted 8 lines · Luca T.
Hello,
i would like to understand how hotplugging works, i did some experiments but without success.
If i did understand well, when i connect an usb-disk the script/etc/hotplug/usb/usb-storageshould be fired... but this doesn't seem to happen.What kernel are you using?
Quoted 5 lines
I put a line inside it ( echo "test" >/tmp/test ) but the file is never created when i plug or unplug my usb-disk.
Why?
Quoted 8 lines
On 2.4 that script would only be run when the driver is first loaded. When the device is removed, the driver is never unloaded.
thanks,
greg k-h
At least with recent hotplug packages user mode drivers are loaded even if kernel module is loaded or not, in 2.4 and 2.6.
--Mika
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel