Skip to contentSkip to conversation

2.6.4-mm1

PATCH In review Andrew Morton 25 participants 62 messages Mar 11, 2004 – Apr 4, 2004

Subsystems (7)
Media (V4L/DVB) VFS Sound Kbuild +3 more subsystems
lore
Share & tools
lore
#0 lore raw

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.4/2.6.4-mm1/

- The CPU scheduler changes in -mm (sched-domains) have been hanging about for too long. I had been hoping that the people who care about SMT and NUMA performance would have some results by now but all seems to be silent.

I do not wish to merge these up until the big-iron guys can say that they suit their requirements, with a reasonable expectation that we will not need to churn this code later in the 2.6 series.

So. If you have been testing, please speak up. If you have not been testing, please do so.

- Major surgery against the pagecache, radix-tree and writeback code. This work is to address the O_DIRECT-vs-buffered data exposure horrors which we've been struggling with for months.

As a side-effect, 32 bytes are saved from struct inode and eight bytes are removed from struct page.

This change will break any arch code which is using page->list and will also break any arch code which is using page->lru of memory which was obtained from slab.

It seems to work OK here, but I suggest people not rush out and convert all of the corporate finance department's servers to 2.6.4-mm1.

The basic problem which we (mainly Daniel McNeil) have been struggling with is in getting a really reliable fsync() across the page lists while other processes are performing writeback against the same file. It's like juggling four bars of wet soap with your eyes shut while someone is whacking you with a baseball bat. Daniel pretty much has the problem plugged but I suspect that's just because we don't have testcases to trigger the remaining problems. The complexity and additional locking which those patches add is worrisome.

So the approach taken here is to remove the page lists altogether and replace the list-based writeback and wait operations with in-order radix-tree walks.

The radix-tree code has been enhanced to support "tagging" of pages, for later searches for pages which have a particular tag set. This means that we can ask the radix tree code "find me the next 16 dirty pages starting at pagecache index N" and it will do that in O(log64(N)) time.

This affects I/O scheduling potentially quite significantly. It is no longer the case that the kernel will submit pages for I/O in the order in which the application dirtied them. We instead submit them in file-offset order all the time.

This is likely to be advantageous when applications are seeking all over a large file randomly writing small amounts of data. I haven't performed much benchmarking, but tiobench random write throughput seems to be increased by 30%. Other tests appear to be unaltered. dbench may have got 10-20% quicker, but it's variable.

There is one large file which everyone seeks all over randomly writing small amounts of data: the blockdev mapping which caches filesystem metadata. The kernel's IO submission patterns for this are now ideal.

Because writeback and wait-for-writeback use a tree walk instead of a list walk they are no longer livelockable. This probably means that we no longer need to hold i_sem across O_SYNC writes and perhaps fsync() and fdatasync(). This may be beneficial for databases: multiple processes writing and syncing different parts of the same file at the same time can now all submit and wait upon writes to just their own little bit of the file, so we can get a lot more data into the queues.

It is trivial to implement a part-file-fdatasync() as well, so applications can say "sync the file from byte N to byte M", and multiple applications can do this concurrently. This is easy for ext2 filesystems, but probably needs lots of work for data-journalled filesystems and XFS and it probably doesn't offer much benefit over an i_semless O_SYNC write.

- Dropped the hotplug CPU patches: bits of them were merged into Linus's kernel and things broke.

- Various little fixes as usual.

Changes since 2.6.4-rc2-mm1:

bk-acpi.patch
bk-alsa.patch
bk-driver-core.patch
bk-i2c.patch
bk-input.patch
bk-netdev.patch
bk-pci.patch
bk-scsi.patch
bk-usb.patch

Latest external trees

-export-filemap_flush.patch
-vma-corruption-fix.patch
-centaur-crypto-core-support.patch

Merged

+bk-acpi-warning-fix.patch

Fix a warning

+x86_64-update.patch

Latest x86_64 code drop

+print-kernel-version-in-oops.patch

Display the kernel version in the x86 oops message

+ppc64-iseries-virtual-console-fix.patch

iSeries device number fix

-zap_page_range-debug.patch

Turns out the code path which this patch was trying to detect the deadness of is in fact used.

+sched-stats-64-bit.patch

Use 64-bit numbers for various CPU scheduler statistics

-hotplugcpu-generalise-bogolock.patch -hotplugcpu-generalise-bogolock-fix-for-kthread-stop-using-signals.patch -hotplugcpu-use-bogolock-in-modules.patch -hotplugcpu-core.patch
-stop_machine-warning-fix.patch -hotplugcpu-core-sparc64-build-fix.patch -hotplugcpu-core-fix-for-kthread-stop-using-signals.patch -migrate_to_cpu-dependency-fix.patch -hotplugcpu-core-drain_local_pages-fix.patch -hotplugcpu-rcupdate-many-cpus-fix.patch

Dropped

-ext3-dirty-debug-patch.patch

This debug trap never triggered

-fusion-use-min-max.patch

Other changes broke this

+dm-map-rwlock-ng.patch

New version of spinlocking for the device mapper map tables

+dm-remove-__dm_request.patch

Remvoe __dm_request()

+md-array-assembly-major-fix.patch

RAID fix

+fadvise-fixups.patch

Fix some fadvise() boundary conditions

+validate_mm-fixes.patch

Enhance validate_mm()

+3ware-update.patch

3ware driver update

+3c59x-xcvr-fix.patch

Fix 3c59x transceiver handling

+current_is_keventd-speedup.patch

Simplify current_is_keventd()

+root-ramdisk-fix.patch

Make "root=/dev/ram" work again

+cciss-per-device-queues.patch

per-device queues for the cciss driver

+blkdev-fix-final-page.patch

Fix reads of the final block of blockdevs

+wavfront-needs-syscalls_h.patch

Warning (and possible oops) fixes

+edd-legacy-parameters-fix.patch

EDD back-compatibility

+cciss-section-fix.patch

__init section fix

+pte_chain-nowarns.patch

Prevent possible-but-expected page allocator warnings

+macintosh-config-fix.patch

Don't offer mac drivers on other platforms

+applicom-warning-fix.patch

Fix a warning

+CONFIG_NVRAM-dependencies.patch

Fix NVRAM dependencies

+move-job-control-stuff-tosignal_struct.patch

Move various job control fields out of the task_struct and into the signal_struct.

+module_h-attribute_used-fix.patch

__attribute_used__ sanity

+kobject-module-request-64-bit-fix.patch

Fix for 64-bit machines

+sch_htb-fix.patch

netfilter 64-bit fix

+blk-congestion-races.patch

Conceivably fix rare races in blk_congestion_wait()

+vm-lrutopage-cleanup.patch

Add a handy macro to tidy up vmscan.c

+radix-tree-tagging.patch

Add search tagging to radix trees.

+irq-safe-pagecache-lock.patch

Make mapping->page_lock irq-safe, and rename it to tree_lock to detect missed conversions.

+tag-dirty-pages.patch

Tag dirty pages as being dirty within their radix trees.

+tag-writeback-pages.patch

Tag writeback pages as being under writeback in their radix trees

+stop-using-dirty-pages.patch
+stop-using-io-pages.patch
+stop-using-locked-pages.patch
+stop-using-clean-pages.patch

Wean the kernel off the four address_space page lists

+unslabify-pgds-and-pmds.patch

We cannot use page->lru to manage slab-derived pages: slab itself wants to use it.

+slab-stop-using-page-list.patch

Switch slab page management from page->list to page->lru.

+page_alloc-stop-using-page-list.patch

Switch the page allocator from using page->list to using page->lru.

+hugetlb-stop-using-page-list.patch

Switch the hugetlbpage implementations from using page->list to using page->lru.

+pageattr-stop-using-page-list.patch

Switch the pageattr code (CONFIG_DEBUG_PAGEALLOC) from using page->list to using page->lru.

+readahead-stop-using-page-list.patch

Switch the readpages() API from using page->list over to using page->lru.

+compound-pages-stop-using-lru.patch

Teach the compound page management to use page fields other than page->list.

+remove-page-list.patch

Remove the `list' field from struct page.

+remap-file-pages-prot-ia64-2.6.4-rc2-mm1-A0.patch

Implement the per-page-permissions-in-remap_file_pages for ia64. Hasn't been tested.

-4g4g-THREAD_SIZE-fixes.patch
-4g4g-handle_BUG-fix.patch

Folded into 4g-2.6.0-test2-mm2-A5.patch

O_DIRECT-vs-buffered-fix.patch
O_DIRECT-vs-buffered-fix-pdflush-hang-fix.patch
serialise-writeback-fdatawait.patch
restore-writeback-trylock.patch

Dropped. Hopefully we don't need these any more.

All 258 patches:

bk-acpi.patch

bk-alsa.patch

bk-driver-core.patch

bk-i2c.patch

bk-input.patch

bk-netdev.patch

bk-pci.patch

bk-scsi.patch

bk-usb.patch

mm.patch
add -mmN to EXTRAVERSION

dma_sync_for_device-cpu.patch
dma_sync_for_{cpu,device}()

bk-acpi-warning-fix.patch
bk-acpi warning fixes

x86_64-update.patch
x86-64 merge for 2.6.4

move-dma_consistent_dma_mask.patch
move consistent_dma_mask to the generic device

move-dma_consistent_dma_mask-x86_64-fix.patch

move-dma_consistent_dma_mask-sn-fix.patch
Fix dma_mask patch for sn platform

print-kernel-version-in-oops.patch
print kernel version in oops messages

kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)

kgdb-ga-recent-gcc-fix.patch
kgdb: fix for recent gcc

kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll

kgdboe-non-ia32-build-fix.patch

kgdb-warning-fixes.patch
kgdb warning fixes

kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3

kgdb-THREAD_SIZE-fixes.patch
THREAD_SIZE fixes for kgdb

must-fix.patch
must fix lists update
must fix list update
mustfix update

must-fix-update-5.patch
must-fix update

ppc64-iseries-virtual-console-fix.patch
ppc64: fix iSeries virtual console devices

ppc64-reloc_hide.patch

compat-signal-noarch-2004-01-29.patch
Generic 32-bit compat for copy_siginfo_to_user

compat-generic-ipc-emulation.patch
generic 32 bit emulation for System-V IPC

remove-sys_ioperm-stubs.patch
Clean up sys_ioperm stubs

readdir-cleanups.patch
readdir() cleanups

ext3-journalled-quotas-2.patch
ext3: journalled quota

invalidate_inodes-speedup.patch
invalidate_inodes speedup
more invalidate_inodes speedup fixes

cfq-4.patch
CFQ io scheduler
CFQ fixes

config_spinline.patch
uninline spinlocks for profiling accuracy.

pdflush-diag.patch

get_user_pages-handle-VM_IO.patch
fix get_user_pages() against mappings of /dev/mem

pci_set_power_state-might-sleep.patch

CONFIG_STANDALONE-default-to-n.patch
Make CONFIG_STANDALONE default to N

extra-buffer-diags.patch

CONFIG_SYSFS.patch
From: Pat Mochel <[email protected]>
Subject: [PATCH] Add CONFIG_SYSFS

CONFIG_SYSFS-boot-from-disk-fix.patch

slab-leak-detector.patch
slab leak detector
mm/slab.c warning in cache_alloc_debugcheck_after

scale-nr_requests.patch
scale nr_requests with TCQ depth

truncate_inode_pages-check.patch

local_bh_enable-warning-fix.patch

sched-stats-64-bit.patch
Use 64-bit counters for scheduler stats

sched-find_busiest_node-resolution-fix.patch
sched: improved resolution in find_busiest_node

sched-domains.patch
sched: scheduler domain support
sched: fix for NR_CPUS > BITS_PER_LONG
sched: clarify find_busiest_group
sched: find_busiest_group arithmetic fix

sched-domains-improvements.patch
sched domains kernbench improvements

sched-clock-fixes.patch
fix sched_clock()

sched-sibling-map-to-cpumask.patch
sched: cpu_sibling_map to cpu_mask
p4-clockmod sibling_map fix
p4-clockmod: handle more than two siblings

sched-domains-i386-ht.patch
sched: implement domains for i386 HT
sched: Fix CONFIG_SMT oops on UP
sched: fix SMT + NUMA bug
Change arch_init_sched_domains to use cpu_online_map Fix build with NR_CPUS > BITS_PER_LONG

sched-domain-tweak.patch
i386-sched-domain code consolidation

sched-no-drop-balance.patch
sched: handle inter-CPU jiffies skew

sched-directed-migration.patch
sched_balance_exec(): don't fiddle with the cpus_allowed mask

sched-domain-debugging.patch
sched_domain debugging

sched-domain-balancing-improvements.patch
scheduler domain balancing improvements

sched-group-power.patch
sched-group-power
sched-group-power warning fixes

sched-domains-use-cpu_possible_map.patch
sched_domains: use cpu_possible_map

sched-smt-nice-handling.patch
sched: SMT niceness handling

sched-smt-nice-optimisation.patch
sched: SMT-ice optimisation

fa311-mac-address-fix.patch
wrong mac address with netgear FA311 ethernet card

laptop-mode-2.patch
laptop-mode for 2.6, version 6
Documentation/laptop-mode.txt
laptop-mode documentation updates
Laptop mode documentation addition
laptop mode simplification

pid_max-fix.patch
Bug when setting pid_max > 32k

use-soft-float.patch
Use -msoft-float

DRM-cvs-update.patch
DRM cvs update

drm-include-fix.patch

process-migration-speedup.patch
Reduce TLB flushing during process migration

nfs-31-attr.patch
NFSv2/v3/v4: New attribute revalidation code

nfs-reconnect-fix.patch

nfs-mount-fix.patch
Update to NFS mount....

nfs-d_drop-lowmem.patch
NFS: handle nfs_fhget() error

nfs-avoid-i_size_write.patch
NFS: avoid unlocked i_size_write()

nfs_unlink-oops-fix.patch
nfs: fix "busy inodes after umount"

nfs-remove-XID-spinlock.patch
nfs: Remove an unnecessary spinlock from XID generation...

nfs-misc-rpc-fixes.patch
nfs: Misc RPC fixes...

nfs-improved-writeback-strategy.patch
nfs: improve writeback caching

nfs-simplify-config-options.patch
nfs: simplify client configuration options.

nfs-fix-msync.patch
nfs: fix msync()

nfs-mount-return-useful-errors.patch
nfs: make mount command return more useful errors

nfs-misc-minor-fixes.patch
nfs: misc minor fixes

nfs-lockd-sync-01.patch
nfs: sync lockd to 2.4.x

nfs-lockd-sync-02.patch
nfs: sync lockd to 2.4.x

nfs-lockd-sync-03.patch
nfs: sync lockd to 2.4.x

nfs-lockd-sync-04.patch
nfs: sync lockd to 2.4.x

nfs-rpc-remove-redundant-memset.patch
nfs: remove unnecessary memset() in RPC

nfs-tunable-rpc-slot-table.patch
nfs: make the RPC slot table size a tunable value.

nfs-short-read-fix.patch
nfs: fix an NFSv2 read bug

nfs-server-in-root_server_path.patch
Pull NFS server address out of root_server_path

non-readable-binaries.patch
Handle non-readable binfmt_misc executables

binfmt_misc-credentials.patch
binfmt_misc: improve calaulation of interpreter's credentials

initramfs-search-for-init.patch
search for /init for initramfs boots

adaptive-lazy-readahead.patch
adaptive lazy readahead

sysfs_remove_dir-race-fix.patch
sysfs_remove_dir-vs-dcache_readdir race fix

sysfs_remove_subdir-dentry-leak-fix.patch
Fix dentry refcounting in sysfs_remove_group()

per-node-rss-tracking.patch
Track per-node RSS for NUMA

aic7xxx-deadlock-fix.patch
aic7xxx deadlock fix

futex_wait-debug.patch
futex_wait debug

module_exit-deadlock-fix.patch
module unload deadlock fix

selinux-inode-race-trap.patch
Try to diagnose Bug 2153

ufs2-01.patch
read-only support for UFS2

ide-scsi-error-handling-fixes.patch
ide-scsi error handling fixes

ide-scsi-error-handling-update.patch
ide-scsi error handler update

fb_console_init-fix.patch
fb_console_init fix

poll-select-longer-timeouts.patch
poll()/select(): support longer timeouts

poll-select-range-check-fix.patch
poll()/select() range checking fix

poll-select-handle-large-timeouts.patch
poll()/select(): handle long timeouts

pcmcia-debugging-rework-1.patch
Overhaul PCMCIA debugging (1)

cs_err-compile-fix.patch
pcmcia: workaround for gcc-2.95 bug in cs_err()

pcmcia-debugging-rework-2.patch
Overhaul PCMCIA debugging (2)

distribute-early-allocations-across-nodes.patch
Manfred's patch to distribute boot allocations across nodes

time-interpolator-fix.patch
time interpolator fix

kmsg-nonblock.patch
teach /proc/kmsg about O_NONBLOCK

mixart-build-fix.patch
CONFIG_SND_MIXART doesn't compile

add-a-slab-for-ethernet.patch
Add a kmalloc slab for ethernet packets

remove-__io_virt_debug.patch
remove __io_virt_debug

genrtc-cleanups.patch
genrtc: cleanups

piix_ide_init-can-be-__init.patch
piix_ide_init can be __init

i386-early-memory-cleanup.patch
i386 very early memory detection cleanup patch

modular-mce-handler.patch
Allow X86_MCE_NONFATAL to be a module

remove-more-KERNEL_SYSCALLS.patch
further __KERNEL_SYSCALLS__ removal
build fix for remove-more-KERNEL_SYSCALLS.patch
fix the build for remove-more-KERNEL_SYSCALLS

mq-01-codemove.patch
posix message queues: code move

mq-02-syscalls.patch
posix message queues: syscall stubs

mq-03-core.patch
posix message queues: implementation

mq-03-core-update.patch
posix message queues: update to core patch

mq-04-linuxext-poll.patch
posix message queues: linux-specific poll extension

mq-05-linuxext-mount.patch
posix message queues: made user mountable

mq-update-01.patch
posix message queue update

mq-security-fix.patch
security bugfix for mqueue

dm-01-endio-method.patch
dm: endio method

dm-03-list_for_each_entry-audit.patch
dm: list_for_each_entry audit

dm-04-default-queue-limits-fix.patch
dm: default queue limits

dm-05-list-targets-command.patch
dm: list targets cmd

dm-06-stripe-width-fix.patch
dm: stripe width fix

queue-congestion-callout.patch
Add queue congestion callout

queue-congestion-dm-implementation.patch
Implement queue congestion callout for device mapper

dm-maplock.patch
devicemapper: use rwlock for map alterations

dm-map-rwlock-ng.patch
Another DM maplock implementation

dm-remove-__dm_request.patch
dmL remove __dm_request

use-wait_task_inactive-in-kthread_bind.patch
use wait_task_inactive() in kthread_bind()

HPFS1-hpfs2-RC4-rc1.patch

HPFS2-hpfs_namei-RC4-rc1.patch

selinux-cleanup-binary-mount-data.patch
selinux: clean up binary mount data

udffs-update.patch
UDF filesystem update

kbuild-redundant-CFLAGS.patch
kbuild: Remove CFLAGS assignment in i386/mach-*/Makefile

numa-aware-zonelist-builder.patch
NUMA-aware zonelist builder
numa-aware zonelist builder fix
numa-aware node builder fix #2

remove-redundant-unplug_timer-deletion.patch
Redundant unplug_timer deletion

queue_work_on_cpu.patch
Add queue_work_on_cpu() workqueue function

m68k-rename-sys_functions.patch
m68k: rename sys_* functions

pdc202xx_new-update.patch
ide: update for pdc202xx_new driver

siimage-update.patch
ide: update for siimage driver

ide-cleanups-01.patch
ide: IDE cleanups

ide-cleanups-02.patch
ide: IDE cleanups

ide-cleanups-03.patch
ide: IDE cleanups

cdromaudio-use-dma.patch
use DMA for CDROM audio reading

sysfs-pin-kobject.patch
sysfs: pin kobjects to fix use-after-free crashes

ATI-IXP-IDE-support.patch
ATI IXP IDE support

ipmi-updates-3.patch
IPMI driver updates

ipmi-socket-interface.patch
IPMI: socket interface

md-use-schedule_timeout.patch
md: use "shedule_timeout(2)" instead of yield()

md-array-assembly-fix.patch
md: allow assembling of partitioned arrays at boot time.

md-array-assembly-major-fix.patch
md array assembly major number fix

compiler_h-scope-fixes.patch
compiler.h scoping fixes

nmi_watchdog-local-apic-fix.patch
Fix nmi_watchdog=2 and P4 HT

nmi-1-hz.patch
set nmi_hz to 1 with nmi_watchdog=2 and SMP

elf-mmap-fix.patch
Fix elf mapping of the zero page

kbuild-more-cleaning.patch
kbuild: Cause `make clean' to remove more files

LOOP_CHANGE_FD.patch
LOOP_CHANGE_FD ioctl

loop-setup-race-fix.patch
loop setup race fix

handle-dot-o-paths.patch
kbuild: fix usage with directories containing '.o'

acpi-asmlinkage-fix.patch
gcc-3.5: acpi build fix

ipc-sem-extra-sem_unlock.patch
Remove unneeded unlock in ipc/sem.c

procfs-dangling-subdir-fix.patch
/proc data corruption check

AMD-768MPX-bootmem-fix.patch
Work around an AMD768MPX erratum

i810fb-on-x86_64.patch
Enable i810 fb on x86-64

ext23-remove-acl-limits.patch
Remove arbitrary #acl entries limits on ext[23] when reading

watchdog-moduleparam-patches.patch
watchdog: moduleparam-patches

amd-elan-fix.patch
AMD ELAN Kconfig fix

pcmcia-netdev-ordering-fixes.patch
PCMCIA netdevice ordering issues

fadvise-fixups.patch
fadvise(POSIX_FADV_DONTNEED) fixups

validate_mm-fixes.patch
Fix and harden validate_mm

3ware-update.patch
3ware driver update

3c59x-xcvr-fix.patch
Fix 3c59x transceiver handling

current_is_keventd-speedup.patch
current_is_keventd() speedup

root-ramdisk-fix.patch
Fix rootfs on ramdisk

cciss-per-device-queues.patch
cciss: per device queues

blkdev-fix-final-page.patch
Fix reading the last block on a bdev

wavfront-needs-syscalls_h.patch
wavfront.c needs syscalls.h

edd-legacy-parameters-fix.patch
EDD: Get Legacy Parameters

cciss-section-fix.patch
cciss: init section fix

pte_chain-nowarns.patch
add nowarn to a few pte chain allocators

macintosh-config-fix.patch
Disable Macintosh device drivers for all but PPC || MAC

applicom-warning-fix.patch
Applicom warning

CONFIG_NVRAM-dependencies.patch
Fix CONFIG_NVRAM dependencies

move-job-control-stuff-tosignal_struct.patch
moef job control fields from task_struct to signal_struct

module_h-attribute_used-fix.patch
module.h __attribute_used__ fix

kobject-module-request-64-bit-fix.patch
Fix a 64bit bug in kobject module request

sch_htb-fix.patch
net: fix sch_htb on 64-bit

instrument-highmem-page-reclaim.patch
vm: per-zone vmscan instrumentation

blk_congestion_wait-return-remaining.patch
return remaining jiffies from blk_congestion_wait()

blk-congestion-races.patch
Narrow blk_congestion_wait races

vmscan-remove-priority.patch
mm/vmscan.c: remove unused priority argument.

kswapd-throttling-fixes.patch
kswapd throttling fixes

vm-refill_inactive-preserve-referenced.patch
vmscan: preserve page referenced info in refill_inactive()

shrink_slab-precision-fix.patch
shrink_slab: math precision fix

try_to_free_pages-shrink_slab-evenness.patch
vm: shrink slab evenly in try_to_free_pages()

vmscan-total_scanned-fix.patch
vmscan: fix calculation of number of pages scanned

shrink_slab-for-all-zones-2.patch
vm: scan slab in response to highmem scanning

zone-balancing-fix-2.patch
vmscan: zone balancing fix

vmscan-control-by-nr_to_scan-only.patch
vmscan: drive everything via nr_to_scan

vmscan-balance-zone-scanning-rates.patch
Balance inter-zone scan rates

vmscan-dont-throttle-if-zero-max_scan.patch
vmscan: avoid bogus throttling

kswapd-avoid-higher-zones.patch
kswapd: avoid unnecessary reclaiming from higher zones

kswapd-avoid-higher-zones-reverse-direction.patch
kswapd: fix lumpy page reclaim

kswapd-avoid-higher-zones-reverse-direction-fix.patch
fix the kswapd zone scanning algorithm

vmscan-throttle-later.patch
vmscan: less throttling of page allocators and kswapd

vm-batch-inactive-scanning.patch
vmscan: batch up inactive list scanning work

vm-batch-inactive-scanning-fix.patch
fix vm-batch-inactive-scanning.patch

vm-balance-refill-rate.patch
vm: balance inactive zone refill rates

vm-lrutopage-cleanup.patch
vmscan: add lru_to_page() helper

slab-no-higher-order.patch
slab: avoid higher-order allocations

O_DIRECT-race-fixes-rollup.patch
O_DIRECT data exposure fixes

O_DIRECT-ll_rw_block-vs-block_write_full_page-fix.patch
Fix race between ll_rw_block() and block_write_full_page()

blockdev-direct-io-speedup.patch
blockdev direct-io speedups

dio-aio-fixes.patch
direct-io AIO fixes

aio-fallback-bio_count-race-fix-2.patch
AIO+DIO bio_count race fix

aio-direct-io-oops-fix.patch
AIO/direct-io oops fix

radix-tree-tagging.patch
radix-tree tags for selective lookup

irq-safe-pagecache-lock.patch
make the pagecache lock irq-safe.

tag-dirty-pages.patch
tag dirty pages as such in the radix tree

tag-writeback-pages.patch
tag writeback pages as such in their radix tree

stop-using-dirty-pages.patch
stop using the address_space dirty_pages list

stop-using-io-pages.patch
remove address_space.io_pages

stop-using-locked-pages.patch
Stop using address_space.locked_pages

stop-using-clean-pages.patch
stop using address_space.clean_pages

unslabify-pgds-and-pmds.patch
revert the slabification of i386 pgd's and pmd's

slab-stop-using-page-list.patch
slab: stop using page.list

page_alloc-stop-using-page-list.patch
stop using page.list in the page allocator

hugetlb-stop-using-page-list.patch
stop using page->list in the hugetlbpage implementations

pageattr-stop-using-page-list.patch
stop using page.list in pageattr.c

readahead-stop-using-page-list.patch
stop using page.list in readahead

compound-pages-stop-using-lru.patch
stop using page->lru in compound pages

remove-page-list.patch
remove page.list

remap-file-pages-prot-2.6.4-rc1-mm1-A1.patch
per-page protections for remap_file_pages()

remap-file-pages-prot-ia64-2.6.4-rc2-mm1-A0.patch
remap_file_pages page-prot implementation for ia64

list_del-debug.patch
list_del debug check

oops-dump-preceding-code.patch
i386 oops output: dump preceding code

lockmeter.patch
lockmeter

lockmeter-ia64-fix.patch
ia64 CONFIG_LOCKMETER fix

4g-2.6.0-test2-mm2-A5.patch
4G/4G split patch
4G/4G: remove debug code
4g4g: pmd fix
4g/4g: fixes from Bill
4g4g: fpu emulation fix
4g/4g usercopy atomicity fix
4G/4G: remove debug code
4g4g: pmd fix
4g/4g: fixes from Bill
4g4g: fpu emulation fix
4g/4g usercopy atomicity fix
4G/4G preempt on vstack
4G/4G: even number of kmap types
4g4g: fix __get_user in slab
4g4g: Remove extra .data.idt section definition
4g/4g linker error (overlapping sections)
4G/4G: remove debug code
4g4g: pmd fix
4g/4g: fixes from Bill
4g4g: fpu emulation fix
4g4g: show_registers() fix
4g/4g usercopy atomicity fix
4g4g: debug flags fix
4g4g: Fix wrong asm-offsets entry
cyclone time fixmap fix
4G/4G preempt on vstack
4G/4G: even number of kmap types
4g4g: fix __get_user in slab
4g4g: Remove extra .data.idt section definition
4g/4g linker error (overlapping sections)
4G/4G: remove debug code
4g4g: pmd fix
4g/4g: fixes from Bill
4g4g: fpu emulation fix
4g4g: show_registers() fix
4g/4g usercopy atomicity fix
4g4g: debug flags fix
4g4g: Fix wrong asm-offsets entry
cyclone time fixmap fix
use direct_copy_{to,from}_user for kernel access in mm/usercopy.c 4G/4G might_sleep warning fix
4g/4g pagetable accounting fix
Fix 4G/4G and WP test lockup
4G/4G KERNEL_DS usercopy again
Fix 4G/4G X11/vm86 oops
Fix 4G/4G athlon triplefault
4g4g SEP fix
Fix 4G/4G split fix for pre-pentiumII machines
4g/4g PAE ACPI low mappings fix
zap_low_mappings() cannot be __init
4g/4g: remove printk at boot
4g4g: fix handle_BUG()
4g4g: acpi sleep fixes

4g4g-locked-userspace-copy.patch
Do a locked user-space copy for 4g/4g

ia32-4k-stacks.patch
ia32: 4Kb stacks (and irqstacks) patch

ia32-4k-stacks-build-fix.patch
4k stacks build fix

4k-stacks-in-modversions-magic.patch
Add 4k stacks to module version magic

ppc-fixes.patch
make mm4 compile on ppc

ppc-fixes-dependency-fix.patch
ppc-fixes dependency fix

#1 lore raw
Quoted 3 lines · Andrew Morton

- Major surgery against the pagecache, radix-tree and writeback code. This work is to address the O_DIRECT-vs-buffered data exposure horrors which we've been struggling with for months.

[snip]

Looks extremely kick ass! mpage is has a left-over spin_unlock in there though, I need this to boot:

mpage.c renamed from opt/kernel/linux-2.6.4-mm1/fs/mpage.c +0 -1
@@ -672,7 +672,6 @@
 		}
 		pagevec_release(&pvec);
 	}
-	spin_unlock_irq(&mapping->tree_lock);
 	if (bio)
 		mpage_bio_submit(WRITE, bio);
 	return ret;
Signature · 1 line
Jens Axboe
#2 lore raw
In reply to Andrew Morton
Quoted 2 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.4/2.6.4-mm1/

Needs this fix, if you use CONFIG_DEBUG_SPINLOCK

fs/mpage.c renamed from fs/mpage.c~mpage-locking-bug +0 -1
@@ -672,7 +672,6 @@ mpage_writepages(struct address_space *m
 		}
 		pagevec_release(&pvec);
 	}
-	spin_unlock_irq(&mapping->tree_lock);
 	if (bio)
 		mpage_bio_submit(WRITE, bio);
 	return ret;

_

#3 lore raw
Quoted 6 lines · Andrew Morton
Quoted 2 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.4/2.6.4-mm1/

Needs this fix, if you use CONFIG_DEBUG_SPINLOCK

Imported to BitKeeper:

bk://smurf.bkbits.net/linux-2.6.4-mm1

I have that process automated rather well now. If anybody wants the import script (it can easily be adapted for other patch series), just ask.

Signature · 1 line
Matthias Urlichs
#4 lore raw
In reply to Andrew Morton

Hi,

on my config (opteron box) I need this patch to get it compiled :

compat_ioctl.c 2004-03-11 08:57:01.770326352 +0000 renamed from compat_ioctl.c.orig 2004-03-11 08:57:49.472074584 +0000 +1 -1
@@ -1604,7 +1604,7 @@
         * To have permissions to do most of the vt ioctls, we either have
         * to be the owner of the tty, or super-user.
         */
-       if (current->tty == tty || capable(CAP_SYS_ADMIN))
+       if (current->signal->tty == tty || capable(CAP_SYS_ADMIN))
                return 1;
        return 0;
 }

I guess it's been forgotten in some other patch. (and i hope it's the good fix :)

while I am at it, I am running a 64 bits kernel with 32 bits debian testing and
it seems some ioctl conversion fails
that happened with all 2.6 I tried.
here is the relevant kernel messages part :
ioctl32(dmsetup:26199): Unknown cmd fd(3) cmd(c134fd00){01} arg(0804c0b0) on /dev/mapper/control ioctl32(fsck.reiserfs:201): Unknown cmd fd(4) cmd(80081272){00} arg(ffffdab8) on /dev/ide/host0/bus0/target0/lun0/part4

Cheers,
Mik

Le jeudi 11 Mars 2004 08:31, vous avez écrit :

Quoted 1,180 lines

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.4/2.6.4-m m1/

- The CPU scheduler changes in -mm (sched-domains) have been hanging about for too long. I had been hoping that the people who care about SMT and NUMA performance would have some results by now but all seems to be
silent.

I do not wish to merge these up until the big-iron guys can say that they suit their requirements, with a reasonable expectation that we will not need to churn this code later in the 2.6 series.

So. If you have been testing, please speak up. If you have not been testing, please do so.

- Major surgery against the pagecache, radix-tree and writeback code. This work is to address the O_DIRECT-vs-buffered data exposure horrors which we've been struggling with for months.

As a side-effect, 32 bytes are saved from struct inode and eight bytes are removed from struct page.

This change will break any arch code which is using page->list and will also break any arch code which is using page->lru of memory which was obtained from slab.

It seems to work OK here, but I suggest people not rush out and convert all of the corporate finance department's servers to 2.6.4-mm1.

The basic problem which we (mainly Daniel McNeil) have been struggling with is in getting a really reliable fsync() across the page lists while other processes are performing writeback against the same file. It's
like juggling four bars of wet soap with your eyes shut while someone is whacking you with a baseball bat. Daniel pretty much has the problem plugged but I suspect that's just because we don't have testcases to trigger the remaining problems. The complexity and additional locking which those patches add is worrisome.

So the approach taken here is to remove the page lists altogether and replace the list-based writeback and wait operations with in-order radix-tree walks.

The radix-tree code has been enhanced to support "tagging" of pages, for later searches for pages which have a particular tag set. This means
that we can ask the radix tree code "find me the next 16 dirty pages starting at pagecache index N" and it will do that in O(log64(N)) time.

This affects I/O scheduling potentially quite significantly. It is no longer the case that the kernel will submit pages for I/O in the order in which the application dirtied them. We instead submit them in
file-offset order all the time.

This is likely to be advantageous when applications are seeking all over a large file randomly writing small amounts of data. I haven't performed much benchmarking, but tiobench random write throughput seems to be increased by 30%. Other tests appear to be unaltered. dbench may have
got 10-20% quicker, but it's variable.

There is one large file which everyone seeks all over randomly writing small amounts of data: the blockdev mapping which caches filesystem metadata. The kernel's IO submission patterns for this are now ideal.

Because writeback and wait-for-writeback use a tree walk instead of a list walk they are no longer livelockable. This probably means that we
no longer need to hold i_sem across O_SYNC writes and perhaps fsync() and fdatasync(). This may be beneficial for databases: multiple processes writing and syncing different parts of the same file at the same time can now all submit and wait upon writes to just their own little bit of the file, so we can get a lot more data into the queues.

It is trivial to implement a part-file-fdatasync() as well, so applications can say "sync the file from byte N to byte M", and multiple applications can do this concurrently. This is easy for ext2
filesystems, but probably needs lots of work for data-journalled filesystems and XFS and it probably doesn't offer much benefit over an i_semless O_SYNC write.

- Dropped the hotplug CPU patches: bits of them were merged into Linus's kernel and things broke.

- Various little fixes as usual.

Changes since 2.6.4-rc2-mm1:

bk-acpi.patch
bk-alsa.patch
bk-driver-core.patch
bk-i2c.patch
bk-input.patch
bk-netdev.patch
bk-pci.patch
bk-scsi.patch
bk-usb.patch

Latest external trees

(quoted diff) +44 -16
-export-filemap_flush.patch
-vma-corruption-fix.patch
-centaur-crypto-core-support.patch
 
 Merged
 
+bk-acpi-warning-fix.patch
 
 Fix a warning
 
+x86_64-update.patch
 
 Latest x86_64 code drop
 
+print-kernel-version-in-oops.patch
 
 Display the kernel version in the x86 oops message
 
+ppc64-iseries-virtual-console-fix.patch
 
 iSeries device number fix
 
-zap_page_range-debug.patch
 
 Turns out the code path which this patch was trying to detect the deadness
 of is in fact used.
 
+sched-stats-64-bit.patch
 
 Use 64-bit numbers for various CPU scheduler statistics
 
-hotplugcpu-generalise-bogolock.patch
-hotplugcpu-generalise-bogolock-fix-for-kthread-stop-using-signals.patch
-hotplugcpu-use-bogolock-in-modules.patch
-hotplugcpu-core.patch
-stop_machine-warning-fix.patch
-hotplugcpu-core-sparc64-build-fix.patch
-hotplugcpu-core-fix-for-kthread-stop-using-signals.patch
-migrate_to_cpu-dependency-fix.patch
-hotplugcpu-core-drain_local_pages-fix.patch
-hotplugcpu-rcupdate-many-cpus-fix.patch
 
 Dropped
 
-ext3-dirty-debug-patch.patch
 
 This debug trap never triggered
 
-fusion-use-min-max.patch
 
 Other changes broke this
 
+dm-map-rwlock-ng.patch
 
 New version of spinlocking for the device mapper map tables
 
+dm-remove-__dm_request.patch
 
 Remvoe __dm_request()
 
+md-array-assembly-major-fix.patch
 
 RAID fix
 
+fadvise-fixups.patch
 
 Fix some fadvise() boundary conditions
 
+validate_mm-fixes.patch
 
 Enhance validate_mm()
 
+3ware-update.patch
 
 3ware driver update
 
+3c59x-xcvr-fix.patch
 
 Fix 3c59x transceiver handling
 
+current_is_keventd-speedup.patch
 
 Simplify current_is_keventd()
 
+root-ramdisk-fix.patch
 
 Make "root=/dev/ram" work again
 
+cciss-per-device-queues.patch
 
 per-device queues for the cciss driver
 
+blkdev-fix-final-page.patch
 
 Fix reads of the final block of blockdevs
 
+wavfront-needs-syscalls_h.patch
 
 Warning (and possible oops) fixes
 
+edd-legacy-parameters-fix.patch
 
 EDD back-compatibility
 
+cciss-section-fix.patch
 
 __init section fix
 
+pte_chain-nowarns.patch
 
 Prevent possible-but-expected page allocator warnings
 
+macintosh-config-fix.patch
 
 Don't offer mac drivers on other platforms
 
+applicom-warning-fix.patch
 
 Fix a warning
 
+CONFIG_NVRAM-dependencies.patch
 
 Fix NVRAM dependencies
 
+move-job-control-stuff-tosignal_struct.patch
 
 Move various job control fields out of the task_struct and into the
 signal_struct.
 
+module_h-attribute_used-fix.patch
 
 __attribute_used__ sanity
 
+kobject-module-request-64-bit-fix.patch
 
 Fix for 64-bit machines
 
+sch_htb-fix.patch
 
 netfilter 64-bit fix
 
+blk-congestion-races.patch
 
 Conceivably fix rare races in blk_congestion_wait()
 
+vm-lrutopage-cleanup.patch
 
 Add a handy macro to tidy up vmscan.c
 
+radix-tree-tagging.patch
 
 Add search tagging to radix trees.
 
+irq-safe-pagecache-lock.patch
 
 Make mapping->page_lock irq-safe, and rename it to tree_lock to detect
 missed conversions.
 
+tag-dirty-pages.patch
 
 Tag dirty pages as being dirty within their radix trees.
 
+tag-writeback-pages.patch
 
 Tag writeback pages as being under writeback in their radix trees
 
+stop-using-dirty-pages.patch
+stop-using-io-pages.patch
+stop-using-locked-pages.patch
+stop-using-clean-pages.patch
 
 Wean the kernel off the four address_space page lists
 
+unslabify-pgds-and-pmds.patch
 
 We cannot use page->lru to manage slab-derived pages: slab itself wants to
 use it.
 
+slab-stop-using-page-list.patch
 
 Switch slab page management from page->list to page->lru.
 
+page_alloc-stop-using-page-list.patch
 
 Switch the page allocator from using page->list to using page->lru.
 
+hugetlb-stop-using-page-list.patch
 
 Switch the hugetlbpage implementations from using page->list to using
 page->lru.
 
+pageattr-stop-using-page-list.patch
 
 Switch the pageattr code (CONFIG_DEBUG_PAGEALLOC) from using page->list to
 using page->lru.
 
+readahead-stop-using-page-list.patch
 
 Switch the readpages() API from using page->list over to using page->lru.
 
+compound-pages-stop-using-lru.patch
 
 Teach the compound page management to use page fields other than

page->list.

(quoted diff) +2 -2
+remove-page-list.patch
 
 Remove the `list' field from struct page.
 
+remap-file-pages-prot-ia64-2.6.4-rc2-mm1-A0.patch
 
 Implement the per-page-permissions-in-remap_file_pages for ia64.  Hasn't
 been tested.
 
-4g4g-THREAD_SIZE-fixes.patch
-4g4g-handle_BUG-fix.patch
 
 Folded into 4g-2.6.0-test2-mm2-A5.patch

O_DIRECT-vs-buffered-fix.patch
O_DIRECT-vs-buffered-fix-pdflush-hang-fix.patch
serialise-writeback-fdatawait.patch
restore-writeback-trylock.patch

Dropped. Hopefully we don't need these any more.

All 258 patches:

bk-acpi.patch

bk-alsa.patch

bk-driver-core.patch

bk-i2c.patch

bk-input.patch

bk-netdev.patch

bk-pci.patch

bk-scsi.patch

bk-usb.patch

mm.patch
add -mmN to EXTRAVERSION

dma_sync_for_device-cpu.patch
dma_sync_for_{cpu,device}()

bk-acpi-warning-fix.patch
bk-acpi warning fixes

x86_64-update.patch
x86-64 merge for 2.6.4

move-dma_consistent_dma_mask.patch
move consistent_dma_mask to the generic device

move-dma_consistent_dma_mask-x86_64-fix.patch

move-dma_consistent_dma_mask-sn-fix.patch
Fix dma_mask patch for sn platform

print-kernel-version-in-oops.patch
print kernel version in oops messages

kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)

kgdb-ga-recent-gcc-fix.patch
kgdb: fix for recent gcc

kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll

kgdboe-non-ia32-build-fix.patch

kgdb-warning-fixes.patch
kgdb warning fixes

kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3

kgdb-THREAD_SIZE-fixes.patch
THREAD_SIZE fixes for kgdb

must-fix.patch
must fix lists update
must fix list update
mustfix update

must-fix-update-5.patch
must-fix update

ppc64-iseries-virtual-console-fix.patch
ppc64: fix iSeries virtual console devices

ppc64-reloc_hide.patch

compat-signal-noarch-2004-01-29.patch
Generic 32-bit compat for copy_siginfo_to_user

compat-generic-ipc-emulation.patch
generic 32 bit emulation for System-V IPC

remove-sys_ioperm-stubs.patch
Clean up sys_ioperm stubs

readdir-cleanups.patch
readdir() cleanups

ext3-journalled-quotas-2.patch
ext3: journalled quota

invalidate_inodes-speedup.patch
invalidate_inodes speedup
more invalidate_inodes speedup fixes

cfq-4.patch
CFQ io scheduler
CFQ fixes

config_spinline.patch
uninline spinlocks for profiling accuracy.

pdflush-diag.patch

get_user_pages-handle-VM_IO.patch
fix get_user_pages() against mappings of /dev/mem

pci_set_power_state-might-sleep.patch

CONFIG_STANDALONE-default-to-n.patch
Make CONFIG_STANDALONE default to N

extra-buffer-diags.patch

CONFIG_SYSFS.patch
From: Pat Mochel <[email protected]>
Subject: [PATCH] Add CONFIG_SYSFS

CONFIG_SYSFS-boot-from-disk-fix.patch

slab-leak-detector.patch
slab leak detector
mm/slab.c warning in cache_alloc_debugcheck_after

scale-nr_requests.patch
scale nr_requests with TCQ depth

truncate_inode_pages-check.patch

local_bh_enable-warning-fix.patch

sched-stats-64-bit.patch
Use 64-bit counters for scheduler stats

sched-find_busiest_node-resolution-fix.patch
sched: improved resolution in find_busiest_node

sched-domains.patch
sched: scheduler domain support
sched: fix for NR_CPUS > BITS_PER_LONG
sched: clarify find_busiest_group
sched: find_busiest_group arithmetic fix

sched-domains-improvements.patch
sched domains kernbench improvements

sched-clock-fixes.patch
fix sched_clock()

sched-sibling-map-to-cpumask.patch
sched: cpu_sibling_map to cpu_mask
p4-clockmod sibling_map fix
p4-clockmod: handle more than two siblings

sched-domains-i386-ht.patch
sched: implement domains for i386 HT
sched: Fix CONFIG_SMT oops on UP
sched: fix SMT + NUMA bug
Change arch_init_sched_domains to use cpu_online_map Fix build with NR_CPUS > BITS_PER_LONG

sched-domain-tweak.patch
i386-sched-domain code consolidation

sched-no-drop-balance.patch
sched: handle inter-CPU jiffies skew

sched-directed-migration.patch
sched_balance_exec(): don't fiddle with the cpus_allowed mask

sched-domain-debugging.patch
sched_domain debugging

sched-domain-balancing-improvements.patch
scheduler domain balancing improvements

sched-group-power.patch
sched-group-power
sched-group-power warning fixes

sched-domains-use-cpu_possible_map.patch
sched_domains: use cpu_possible_map

sched-smt-nice-handling.patch
sched: SMT niceness handling

sched-smt-nice-optimisation.patch
sched: SMT-ice optimisation

fa311-mac-address-fix.patch
wrong mac address with netgear FA311 ethernet card

laptop-mode-2.patch
laptop-mode for 2.6, version 6
Documentation/laptop-mode.txt
laptop-mode documentation updates
Laptop mode documentation addition
laptop mode simplification

pid_max-fix.patch
Bug when setting pid_max > 32k

use-soft-float.patch
Use -msoft-float

DRM-cvs-update.patch
DRM cvs update

drm-include-fix.patch

process-migration-speedup.patch
Reduce TLB flushing during process migration

nfs-31-attr.patch
NFSv2/v3/v4: New attribute revalidation code

nfs-reconnect-fix.patch

nfs-mount-fix.patch
Update to NFS mount....

nfs-d_drop-lowmem.patch
NFS: handle nfs_fhget() error

nfs-avoid-i_size_write.patch
NFS: avoid unlocked i_size_write()

nfs_unlink-oops-fix.patch
nfs: fix "busy inodes after umount"

nfs-remove-XID-spinlock.patch
nfs: Remove an unnecessary spinlock from XID generation...

nfs-misc-rpc-fixes.patch
nfs: Misc RPC fixes...

nfs-improved-writeback-strategy.patch
nfs: improve writeback caching

nfs-simplify-config-options.patch
nfs: simplify client configuration options.

nfs-fix-msync.patch
nfs: fix msync()

nfs-mount-return-useful-errors.patch
nfs: make mount command return more useful errors

nfs-misc-minor-fixes.patch
nfs: misc minor fixes

nfs-lockd-sync-01.patch
nfs: sync lockd to 2.4.x

nfs-lockd-sync-02.patch
nfs: sync lockd to 2.4.x

nfs-lockd-sync-03.patch
nfs: sync lockd to 2.4.x

nfs-lockd-sync-04.patch
nfs: sync lockd to 2.4.x

nfs-rpc-remove-redundant-memset.patch
nfs: remove unnecessary memset() in RPC

nfs-tunable-rpc-slot-table.patch
nfs: make the RPC slot table size a tunable value.

nfs-short-read-fix.patch
nfs: fix an NFSv2 read bug

nfs-server-in-root_server_path.patch
Pull NFS server address out of root_server_path

non-readable-binaries.patch
Handle non-readable binfmt_misc executables

binfmt_misc-credentials.patch
binfmt_misc: improve calaulation of interpreter's credentials

initramfs-search-for-init.patch
search for /init for initramfs boots

adaptive-lazy-readahead.patch
adaptive lazy readahead

sysfs_remove_dir-race-fix.patch
sysfs_remove_dir-vs-dcache_readdir race fix

sysfs_remove_subdir-dentry-leak-fix.patch
Fix dentry refcounting in sysfs_remove_group()

per-node-rss-tracking.patch
Track per-node RSS for NUMA

aic7xxx-deadlock-fix.patch
aic7xxx deadlock fix

futex_wait-debug.patch
futex_wait debug

module_exit-deadlock-fix.patch
module unload deadlock fix

selinux-inode-race-trap.patch
Try to diagnose Bug 2153

ufs2-01.patch
read-only support for UFS2

ide-scsi-error-handling-fixes.patch
ide-scsi error handling fixes

ide-scsi-error-handling-update.patch
ide-scsi error handler update

fb_console_init-fix.patch
fb_console_init fix

poll-select-longer-timeouts.patch
poll()/select(): support longer timeouts

poll-select-range-check-fix.patch
poll()/select() range checking fix

poll-select-handle-large-timeouts.patch
poll()/select(): handle long timeouts

pcmcia-debugging-rework-1.patch
Overhaul PCMCIA debugging (1)

cs_err-compile-fix.patch
pcmcia: workaround for gcc-2.95 bug in cs_err()

pcmcia-debugging-rework-2.patch
Overhaul PCMCIA debugging (2)

distribute-early-allocations-across-nodes.patch
Manfred's patch to distribute boot allocations across nodes

time-interpolator-fix.patch
time interpolator fix

kmsg-nonblock.patch
teach /proc/kmsg about O_NONBLOCK

mixart-build-fix.patch
CONFIG_SND_MIXART doesn't compile

add-a-slab-for-ethernet.patch
Add a kmalloc slab for ethernet packets

remove-__io_virt_debug.patch
remove __io_virt_debug

genrtc-cleanups.patch
genrtc: cleanups

piix_ide_init-can-be-__init.patch
piix_ide_init can be __init

i386-early-memory-cleanup.patch
i386 very early memory detection cleanup patch

modular-mce-handler.patch
Allow X86_MCE_NONFATAL to be a module

remove-more-KERNEL_SYSCALLS.patch
further __KERNEL_SYSCALLS__ removal
build fix for remove-more-KERNEL_SYSCALLS.patch
fix the build for remove-more-KERNEL_SYSCALLS

mq-01-codemove.patch
posix message queues: code move

mq-02-syscalls.patch
posix message queues: syscall stubs

mq-03-core.patch
posix message queues: implementation

mq-03-core-update.patch
posix message queues: update to core patch

mq-04-linuxext-poll.patch
posix message queues: linux-specific poll extension

mq-05-linuxext-mount.patch
posix message queues: made user mountable

mq-update-01.patch
posix message queue update

mq-security-fix.patch
security bugfix for mqueue

dm-01-endio-method.patch
dm: endio method

dm-03-list_for_each_entry-audit.patch
dm: list_for_each_entry audit

dm-04-default-queue-limits-fix.patch
dm: default queue limits

dm-05-list-targets-command.patch
dm: list targets cmd

dm-06-stripe-width-fix.patch
dm: stripe width fix

queue-congestion-callout.patch
Add queue congestion callout

queue-congestion-dm-implementation.patch
Implement queue congestion callout for device mapper

dm-maplock.patch
devicemapper: use rwlock for map alterations

dm-map-rwlock-ng.patch
Another DM maplock implementation

dm-remove-__dm_request.patch
dmL remove __dm_request

use-wait_task_inactive-in-kthread_bind.patch
use wait_task_inactive() in kthread_bind()

HPFS1-hpfs2-RC4-rc1.patch

HPFS2-hpfs_namei-RC4-rc1.patch

selinux-cleanup-binary-mount-data.patch
selinux: clean up binary mount data

udffs-update.patch
UDF filesystem update

kbuild-redundant-CFLAGS.patch
kbuild: Remove CFLAGS assignment in i386/mach-*/Makefile

numa-aware-zonelist-builder.patch
NUMA-aware zonelist builder
numa-aware zonelist builder fix
numa-aware node builder fix #2

remove-redundant-unplug_timer-deletion.patch
Redundant unplug_timer deletion

queue_work_on_cpu.patch
Add queue_work_on_cpu() workqueue function

m68k-rename-sys_functions.patch
m68k: rename sys_* functions

pdc202xx_new-update.patch
ide: update for pdc202xx_new driver

siimage-update.patch
ide: update for siimage driver

ide-cleanups-01.patch
ide: IDE cleanups

ide-cleanups-02.patch
ide: IDE cleanups

ide-cleanups-03.patch
ide: IDE cleanups

cdromaudio-use-dma.patch
use DMA for CDROM audio reading

sysfs-pin-kobject.patch
sysfs: pin kobjects to fix use-after-free crashes

ATI-IXP-IDE-support.patch
ATI IXP IDE support

ipmi-updates-3.patch
IPMI driver updates

ipmi-socket-interface.patch
IPMI: socket interface

md-use-schedule_timeout.patch
md: use "shedule_timeout(2)" instead of yield()

md-array-assembly-fix.patch
md: allow assembling of partitioned arrays at boot time.

md-array-assembly-major-fix.patch
md array assembly major number fix

compiler_h-scope-fixes.patch
compiler.h scoping fixes

nmi_watchdog-local-apic-fix.patch
Fix nmi_watchdog=2 and P4 HT

nmi-1-hz.patch
set nmi_hz to 1 with nmi_watchdog=2 and SMP

elf-mmap-fix.patch
Fix elf mapping of the zero page

kbuild-more-cleaning.patch
kbuild: Cause `make clean' to remove more files

LOOP_CHANGE_FD.patch
LOOP_CHANGE_FD ioctl

loop-setup-race-fix.patch
loop setup race fix

handle-dot-o-paths.patch
kbuild: fix usage with directories containing '.o'

acpi-asmlinkage-fix.patch
gcc-3.5: acpi build fix

ipc-sem-extra-sem_unlock.patch
Remove unneeded unlock in ipc/sem.c

procfs-dangling-subdir-fix.patch
/proc data corruption check

AMD-768MPX-bootmem-fix.patch
Work around an AMD768MPX erratum

i810fb-on-x86_64.patch
Enable i810 fb on x86-64

ext23-remove-acl-limits.patch
Remove arbitrary #acl entries limits on ext[23] when reading

watchdog-moduleparam-patches.patch
watchdog: moduleparam-patches

amd-elan-fix.patch
AMD ELAN Kconfig fix

pcmcia-netdev-ordering-fixes.patch
PCMCIA netdevice ordering issues

fadvise-fixups.patch
fadvise(POSIX_FADV_DONTNEED) fixups

validate_mm-fixes.patch
Fix and harden validate_mm

3ware-update.patch
3ware driver update

3c59x-xcvr-fix.patch
Fix 3c59x transceiver handling

current_is_keventd-speedup.patch
current_is_keventd() speedup

root-ramdisk-fix.patch
Fix rootfs on ramdisk

cciss-per-device-queues.patch
cciss: per device queues

blkdev-fix-final-page.patch
Fix reading the last block on a bdev

wavfront-needs-syscalls_h.patch
wavfront.c needs syscalls.h

edd-legacy-parameters-fix.patch
EDD: Get Legacy Parameters

cciss-section-fix.patch
cciss: init section fix

pte_chain-nowarns.patch
add nowarn to a few pte chain allocators

macintosh-config-fix.patch
Disable Macintosh device drivers for all but PPC || MAC

applicom-warning-fix.patch
Applicom warning

CONFIG_NVRAM-dependencies.patch
Fix CONFIG_NVRAM dependencies

move-job-control-stuff-tosignal_struct.patch
moef job control fields from task_struct to signal_struct

module_h-attribute_used-fix.patch
module.h __attribute_used__ fix

kobject-module-request-64-bit-fix.patch
Fix a 64bit bug in kobject module request

sch_htb-fix.patch
net: fix sch_htb on 64-bit

instrument-highmem-page-reclaim.patch
vm: per-zone vmscan instrumentation

blk_congestion_wait-return-remaining.patch
return remaining jiffies from blk_congestion_wait()

blk-congestion-races.patch
Narrow blk_congestion_wait races

vmscan-remove-priority.patch
mm/vmscan.c: remove unused priority argument.

kswapd-throttling-fixes.patch
kswapd throttling fixes

vm-refill_inactive-preserve-referenced.patch
vmscan: preserve page referenced info in refill_inactive()

shrink_slab-precision-fix.patch
shrink_slab: math precision fix

try_to_free_pages-shrink_slab-evenness.patch
vm: shrink slab evenly in try_to_free_pages()

vmscan-total_scanned-fix.patch
vmscan: fix calculation of number of pages scanned

shrink_slab-for-all-zones-2.patch
vm: scan slab in response to highmem scanning

zone-balancing-fix-2.patch
vmscan: zone balancing fix

vmscan-control-by-nr_to_scan-only.patch
vmscan: drive everything via nr_to_scan

vmscan-balance-zone-scanning-rates.patch
Balance inter-zone scan rates

vmscan-dont-throttle-if-zero-max_scan.patch
vmscan: avoid bogus throttling

kswapd-avoid-higher-zones.patch
kswapd: avoid unnecessary reclaiming from higher zones

kswapd-avoid-higher-zones-reverse-direction.patch
kswapd: fix lumpy page reclaim

kswapd-avoid-higher-zones-reverse-direction-fix.patch
fix the kswapd zone scanning algorithm

vmscan-throttle-later.patch
vmscan: less throttling of page allocators and kswapd

vm-batch-inactive-scanning.patch
vmscan: batch up inactive list scanning work

vm-batch-inactive-scanning-fix.patch
fix vm-batch-inactive-scanning.patch

vm-balance-refill-rate.patch
vm: balance inactive zone refill rates

vm-lrutopage-cleanup.patch
vmscan: add lru_to_page() helper

slab-no-higher-order.patch
slab: avoid higher-order allocations

O_DIRECT-race-fixes-rollup.patch
O_DIRECT data exposure fixes

O_DIRECT-ll_rw_block-vs-block_write_full_page-fix.patch
Fix race between ll_rw_block() and block_write_full_page()

blockdev-direct-io-speedup.patch
blockdev direct-io speedups

dio-aio-fixes.patch
direct-io AIO fixes

aio-fallback-bio_count-race-fix-2.patch
AIO+DIO bio_count race fix

aio-direct-io-oops-fix.patch
AIO/direct-io oops fix

radix-tree-tagging.patch
radix-tree tags for selective lookup

irq-safe-pagecache-lock.patch
make the pagecache lock irq-safe.

tag-dirty-pages.patch
tag dirty pages as such in the radix tree

tag-writeback-pages.patch
tag writeback pages as such in their radix tree

stop-using-dirty-pages.patch
stop using the address_space dirty_pages list

stop-using-io-pages.patch
remove address_space.io_pages

stop-using-locked-pages.patch
Stop using address_space.locked_pages

stop-using-clean-pages.patch
stop using address_space.clean_pages

unslabify-pgds-and-pmds.patch
revert the slabification of i386 pgd's and pmd's

slab-stop-using-page-list.patch
slab: stop using page.list

page_alloc-stop-using-page-list.patch
stop using page.list in the page allocator

hugetlb-stop-using-page-list.patch
stop using page->list in the hugetlbpage implementations

pageattr-stop-using-page-list.patch
stop using page.list in pageattr.c

readahead-stop-using-page-list.patch
stop using page.list in readahead

compound-pages-stop-using-lru.patch
stop using page->lru in compound pages

remove-page-list.patch
remove page.list

remap-file-pages-prot-2.6.4-rc1-mm1-A1.patch
per-page protections for remap_file_pages()

remap-file-pages-prot-ia64-2.6.4-rc2-mm1-A0.patch
remap_file_pages page-prot implementation for ia64

list_del-debug.patch
list_del debug check

oops-dump-preceding-code.patch
i386 oops output: dump preceding code

lockmeter.patch
lockmeter

lockmeter-ia64-fix.patch
ia64 CONFIG_LOCKMETER fix

4g-2.6.0-test2-mm2-A5.patch
4G/4G split patch
4G/4G: remove debug code
4g4g: pmd fix
4g/4g: fixes from Bill
4g4g: fpu emulation fix
4g/4g usercopy atomicity fix
4G/4G: remove debug code
4g4g: pmd fix
4g/4g: fixes from Bill
4g4g: fpu emulation fix
4g/4g usercopy atomicity fix
4G/4G preempt on vstack
4G/4G: even number of kmap types
4g4g: fix __get_user in slab
4g4g: Remove extra .data.idt section definition
4g/4g linker error (overlapping sections)
4G/4G: remove debug code
4g4g: pmd fix
4g/4g: fixes from Bill
4g4g: fpu emulation fix
4g4g: show_registers() fix
4g/4g usercopy atomicity fix
4g4g: debug flags fix
4g4g: Fix wrong asm-offsets entry
cyclone time fixmap fix
4G/4G preempt on vstack
4G/4G: even number of kmap types
4g4g: fix __get_user in slab
4g4g: Remove extra .data.idt section definition
4g/4g linker error (overlapping sections)
4G/4G: remove debug code
4g4g: pmd fix
4g/4g: fixes from Bill
4g4g: fpu emulation fix
4g4g: show_registers() fix
4g/4g usercopy atomicity fix
4g4g: debug flags fix
4g4g: Fix wrong asm-offsets entry
cyclone time fixmap fix
use direct_copy_{to,from}_user for kernel access in mm/usercopy.c 4G/4G might_sleep warning fix
4g/4g pagetable accounting fix
Fix 4G/4G and WP test lockup
4G/4G KERNEL_DS usercopy again
Fix 4G/4G X11/vm86 oops
Fix 4G/4G athlon triplefault
4g4g SEP fix
Fix 4G/4G split fix for pre-pentiumII machines
4g/4g PAE ACPI low mappings fix
zap_low_mappings() cannot be __init
4g/4g: remove printk at boot
4g4g: fix handle_BUG()
4g4g: acpi sleep fixes

4g4g-locked-userspace-copy.patch
Do a locked user-space copy for 4g/4g

ia32-4k-stacks.patch
ia32: 4Kb stacks (and irqstacks) patch

ia32-4k-stacks-build-fix.patch
4k stacks build fix

4k-stacks-in-modversions-magic.patch
Add 4k stacks to module version magic

ppc-fixes.patch
make mm4 compile on ppc

ppc-fixes-dependency-fix.patch
ppc-fixes dependency fix

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#5 lore raw
Quoted 8 lines · Mickael Marchand

Hi,

on my config (opteron box) I need this patch to get it compiled :

compat_ioctl.c 2004-03-11 08:57:01.770326352 +0000 line 1610

Quoted 8 lines
compat_ioctl.c 2004-03-11 08:57:01.770326352 +0000 renamed from compat_ioctl.c.orig 2004-03-11 08:57:49.472074584 +0000 +1 -1
@@ -1604,7 +1604,7 @@
         * To have permissions to do most of the vt ioctls, we either have
         * to be the owner of the tty, or super-user.
         */
-       if (current->tty == tty || capable(CAP_SYS_ADMIN))
+       if (current->signal->tty == tty || capable(CAP_SYS_ADMIN))
                return 1;
        return 0;
 }

yup, thanks.

Quoted 6 lines

while I am at it, I am running a 64 bits kernel with 32 bits debian testing and it seems some ioctl conversion fails
that happened with all 2.6 I tried.
here is the relevant kernel messages part :
ioctl32(dmsetup:26199): Unknown cmd fd(3) cmd(c134fd00){01} arg(0804c0b0) on /dev/mapper/control

The device mapper version 1 ioctl interface was removed. Perhaps you need to update your dm tools?

Quoted 1 line

ioctl32(fsck.reiserfs:201): Unknown cmd fd(4) cmd(80081272){00} arg(ffffdab8) on /dev/ide/host0/bus0/target0/lun0/part4

Is this something which 2.6 has always done, or is it new behaviour?

reiserfs ioctl translation appears to be incomplete...

#6 lore raw
Quoted 6 lines
Quoted 2 lines

ioctl32(fsck.reiserfs:201): Unknown cmd fd(4) cmd(80081272){00} arg(ffffdab8) on /dev/ide/host0/bus0/target0/lun0/part4

Is this something which 2.6 has always done, or is it new behaviour?

reiserfs ioctl translation appears to be incomplete...

Some clown is running around "fixing" our ioctls:

X0081272 is BLKGETSIZE64. Yeah its bust, it was one of those calls that we passed in sizeof(8) instead of 8. The ioctl should be X0041272. The definition is:

#define BLKGETSIZE64 _IOR(0x12,114,size_t)

However at least in debian unstable, util-linux has:

./fdisk/common.h:#define BLKGETSIZE64 _IOR(0x12,114,8) /* 8 = sizeof(u64) */ ./lib/get_blocks.c:#define BLKGETSIZE64 _IOR(0x12,114,long long)

ie X0081272

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=233626

Anton

#7 lore raw
In reply to Andrew Morton

[snip]

Quoted 9 lines
Quoted 6 lines

while I am at it, I am running a 64 bits kernel with 32 bits debian testing and it seems some ioctl conversion fails
that happened with all 2.6 I tried.
here is the relevant kernel messages part :
ioctl32(dmsetup:26199): Unknown cmd fd(3) cmd(c134fd00){01} arg(0804c0b0) on /dev/mapper/control

The device mapper version 1 ioctl interface was removed. Perhaps you need to update your dm tools?

the debian tools are built with ioctlv4 (and compat for v1) I also tried with my own compiled dm tools from source without success

Quoted 4 lines
Quoted 2 lines

ioctl32(fsck.reiserfs:201): Unknown cmd fd(4) cmd(80081272){00} arg(ffffdab8) on /dev/ide/host0/bus0/target0/lun0/part4

Is this something which 2.6 has always done, or is it new behaviour?

always since 2.6 IIRC

Quoted 1 line

reiserfs ioctl translation appears to be incomplete...

ha :)

thanks,
Mik

#8 lore raw
In reply to Andrew Morton
Quoted 4 lines · Andrew Morton

This affects I/O scheduling potentially quite significantly. It is no longer the case that the kernel will submit pages for I/O in the order in which the application dirtied them. We instead submit them in file-offset order all the time.

Hi Andrew,
I have a feeling this change might significantly improve the external
sorting benchmark I emailed you ( http://lkml.org/lkml/2003/12/20/46 ). I will try running it when I get a chance and let you know. It gives me a good excuse to get 2.6 kernels working on my systems :-)

Thanks,

Jim

Signature · 1 line
www.jeweltran.com
#9 lore raw
Quoted 8 lines · [email protected] wrote:
Quoted 4 lines · Andrew Morton

This affects I/O scheduling potentially quite significantly. It is no longer the case that the kernel will submit pages for I/O in the order in which the application dirtied them. We instead submit them in file-offset order all the time.

Quoted 5 lines

Hi Andrew,
I have a feeling this change might significantly improve the external
sorting benchmark I emailed you ( http://lkml.org/lkml/2003/12/20/46 ). I will try running it when I get a chance and let you know. It gives me a good excuse to get 2.6 kernels working on my systems :-)

Hmm, what is happening with Roger Luethi's work lately?

Have there been any patches for use once in this case?

#10 lore raw
In reply to [email protected]
Quoted 11 lines · [email protected] wrote:
Quoted 4 lines · Andrew Morton

This affects I/O scheduling potentially quite significantly. It is no longer the case that the kernel will submit pages for I/O in the order in which the application dirtied them. We instead submit them in file-offset order all the time.

Hi Andrew,
I have a feeling this change might significantly improve the external
sorting benchmark I emailed you ( http://lkml.org/lkml/2003/12/20/46 ). I will try running it when I get a chance and let you know.

That thing's still sitting in by Inbox awaiting attention :(

I just took a quick peek. The `testfile' file which it lays out is well laid-out so yes, if you're seeking all over that file then 2.6.4-mm1 may indeed help throughput.

But `tesfile.tmp' is not well laid-out. Looks like it was created seekily, so its blocks are all jumbled up.

The code in 2.6.4-mm1 favours unjumbled-up files. The code in 2.4 and 2.6.4 favours jumbled-up files.

When kjournald performs writeback it favours jumbled-up files, even in 2.6.4-mm1.

So it's hard to say what will happen ;) I'll take a look later.

Quoted 1 line

It gives me a good excuse to get 2.6 kernels working on my systems :-)

Luddite.

#11 lore raw
In reply to Andrew Morton
Quoted 11 lines

- The CPU scheduler changes in -mm (sched-domains) have been hanging about for too long. I had been hoping that the people who care about SMT and NUMA performance would have some results by now but all seems to be silent.

I do not wish to merge these up until the big-iron guys can say that they suit their requirements, with a reasonable expectation that we will not need to churn this code later in the 2.6 series.

So. If you have been testing, please speak up. If you have not been testing, please do so.

I sucked sched-* out of mm, added sched-ppc64bits (attached) and am having problems with the following threaded test case. NUMA is enabled.

#include <pthread.h>
#define NR_THREADS 100

void dostuff(void *junk)

{
        while(1)
                ;
}

int main()

{
        int i;
        pthread_t tid;

        for (i = 0; i < NR_THREADS-1; i++)
                pthread_create(&tid, NULL, dostuff, NULL);

        dostuff(NULL);
}

100 runnable threads but we never use more than one cpu:

          user    system idle                     user    system idle
cpu0      0       0     100             cpu1      0       0     100
cpu2      0       0     100             cpu3      0       0     100
cpu4      0       0     100             cpu5      0       0     100
cpu6      0       0     100             cpu7      0       0     100
cpu8      0       0     100             cpu9      0       0     100
cpu10     0       0     100             cpu11     0       0     100
cpu12     0       0     100             cpu13   100       0       0

Anton

arch/ppc64/Kconfig renamed from arch/ppc64/Kconfig~sched-ppc64bits +10 -0
diff -puN arch/ppc64/Kconfig~sched-ppc64bits arch/ppc64/Kconfig
@@ -173,6 +173,16 @@ config NUMA
 	bool "NUMA support"
 	depends on DISCONTIGMEM
 
+config SCHED_SMT
+	bool "SMT (Hyperthreading) scheduler support"
+	depends on SMP
+	default off
+	help
+	  SMT scheduler support improves the CPU scheduler's decision making
+	  when dealing with Intel Pentium 4 chips with HyperThreading at a
+	  cost of slightly increased overhead in some places. If unsure say
+	  N here.
+
 config PREEMPT
 	bool
 	help
arch/ppc64/kernel/smp.c renamed from arch/ppc64/kernel/smp.c~sched-ppc64bits +201 -0

204 lines not on this page · raw message

include/asm-ppc64/processor.h renamed from include/asm-ppc64/processor.h~sched-ppc64bits +5 -0
diff -puN include/asm-ppc64/processor.h~sched-ppc64bits include/asm-ppc64/processor.h
@@ -631,6 +631,11 @@ static inline void prefetchw(const void 
 
 #define spin_lock_prefetch(x)	prefetchw(x)
 
+#ifdef CONFIG_SCHED_SMT
+#define ARCH_HAS_SCHED_DOMAIN
+#define ARCH_HAS_SCHED_WAKE_BALANCE
+#endif
+
 #endif /* ASSEMBLY */
 
 #endif /* __ASM_PPC64_PROCESSOR_H */
#12 lore raw
Quoted 37 lines · Anton Blanchard
Quoted 6 lines

- The CPU scheduler changes in -mm (sched-domains) have been hanging about for too long. I had been hoping that the people who care about SMT and NUMA performance would have some results by now but all seems to be silent.

Quoted 7 lines

I do not wish to merge these up until the big-iron guys can say that they suit their requirements, with a reasonable expectation that we will not need to churn this code later in the 2.6 series.

So. If you have been testing, please speak up. If you have not been testing, please do so.

I sucked sched-* out of mm, added sched-ppc64bits (attached) and am having problems with the following threaded test case. NUMA is enabled.

#include <pthread.h>
#define NR_THREADS 100

void dostuff(void *junk)

{
       while(1)
               ;
}

int main()

{
       int i;
       pthread_t tid;

       for (i = 0; i < NR_THREADS-1; i++)
               pthread_create(&tid, NULL, dostuff, NULL);

       dostuff(NULL);
}
Quoted 2 lines

100 runnable threads but we never use more than one cpu:

OK thanks. This is probably a simple bug somewhere. I'll have a look at it soon.

#13 lore raw
Quoted 17 lines · Nick Piggin
Quoted 15 lines · Anton Blanchard
Quoted 15 lines

- The CPU scheduler changes in -mm (sched-domains) have been hanging about
for too long. I had been hoping that the people who care about SMT
and
NUMA performance would have some results by now but all seems to be
silent.

I do not wish to merge these up until the big-iron guys can say
that they
suit their requirements, with a reasonable expectation that we will
not
need to churn this code later in the 2.6 series.

Quoted 8 lines
Quoted 6 lines
Quoted 3 lines

So. If you have been testing, please speak up. If you have not been testing, please do so.

I sucked sched-* out of mm, added sched-ppc64bits (attached) and am having problems with the following threaded test case. NUMA is enabled.

Hi Anton,
You need to be setting cpu_power for each of the CPU groups.

Nick

#14 lore raw
Quoted 2 lines

You need to be setting cpu_power for each of the CPU groups.

Aha, thanks. I'll do that and retest.

Anton

#15 lore raw
In reply to Nick Piggin

Hi,

Quoted 1 line

You need to be setting cpu_power for each of the CPU groups.

Thanks Nick, that fixed it. New patch attached, its basically the x86 version with cpumask fixes when compiling with NR_CPUS > 64.

Anton

---

 gr25_work-anton/arch/ppc64/Kconfig            |   10 +
 gr25_work-anton/arch/ppc64/kernel/smp.c       |  222 ++++++++++++++++++++++++++
 gr25_work-anton/include/asm-ppc64/processor.h |    5 
 3 files changed, 237 insertions(+)
arch/ppc64/Kconfig renamed from arch/ppc64/Kconfig~sched-ppc64bits +10 -0
diff -puN arch/ppc64/Kconfig~sched-ppc64bits arch/ppc64/Kconfig
@@ -175,6 +175,16 @@ config NUMA
 	bool "NUMA support"
 	depends on DISCONTIGMEM
 
+config SCHED_SMT
+	bool "SMT (Hyperthreading) scheduler support"
+	depends on SMP
+	default off
+	help
+	  SMT scheduler support improves the CPU scheduler's decision making
+	  when dealing with Intel Pentium 4 chips with HyperThreading at a
+	  cost of slightly increased overhead in some places. If unsure say
+	  N here.
+
 config PREEMPT
 	bool
 	help
arch/ppc64/kernel/smp.c renamed from arch/ppc64/kernel/smp.c~sched-ppc64bits +222 -0

225 lines not on this page · raw message

include/asm-ppc64/processor.h renamed from include/asm-ppc64/processor.h~sched-ppc64bits +5 -0
diff -puN include/asm-ppc64/processor.h~sched-ppc64bits include/asm-ppc64/processor.h
@@ -631,6 +631,11 @@ static inline void prefetchw(const void 
 
 #define spin_lock_prefetch(x)	prefetchw(x)
 
+#ifdef CONFIG_SCHED_SMT
+#define ARCH_HAS_SCHED_DOMAIN
+#define ARCH_HAS_SCHED_WAKE_BALANCE
+#endif
+
 #endif /* ASSEMBLY */
 
 #endif /* __ASM_PPC64_PROCESSOR_H */

_

#16 lore raw
In reply to Andrew Morton
Quoted 11 lines

- The CPU scheduler changes in -mm (sched-domains) have been hanging about for too long. I had been hoping that the people who care about SMT and NUMA performance would have some results by now but all seems to be silent.

I do not wish to merge these up until the big-iron guys can say that they suit their requirements, with a reasonable expectation that we will not need to churn this code later in the 2.6 series.

So. If you have been testing, please speak up. If you have not been testing, please do so.

Some quick fixes...

Anton

--

Remove unused this_rq

kernel/sched.c renamed from kernel/sched.c~sched-fix +0 -2
diff -puN kernel/sched.c~sched-fix kernel/sched.c
@@ -699,7 +699,6 @@ static int try_to_wake_up(task_t * p, un
 	unsigned long load, this_load;
 	int new_cpu;
 	struct sched_domain *sd;
-	runqueue_t *this_rq;
 #endif
 
 	rq = task_rq_lock(p, &flags);
@@ -730,7 +729,6 @@ static int try_to_wake_up(task_t * p, un
 		goto repeat_lock_task;
 	}
 
-	this_rq = this_rq();
 	now = sched_clock();
 	sd = cpu_sched_domain(this_cpu);
 

--

remove unused load and remove some warnings (due to type checking in min/max macros)

kernel/sched.c renamed from kernel/sched.c~sched-morefixes +0 -1
diff -puN kernel/sched.c~sched-morefixes kernel/sched.c
@@ -1436,7 +1436,6 @@ nextgroup:
 
 	if (*imbalance <= SCHED_LOAD_SCALE/2) {
 		unsigned long pwr_now = 0, pwr_move = 0;
-		unsigned long load;
 		unsigned long tmp;
 
 		/*
include/linux/sched.h renamed from include/linux/sched.h~sched-morefixes +1 -1
diff -puN include/linux/sched.h~sched-morefixes include/linux/sched.h
@@ -531,7 +531,7 @@ do { if (atomic_dec_and_test(&(tsk)->usa
 
 #ifdef CONFIG_SMP
 #define SCHED_LOAD_SHIFT 7	/* increase resolution of load calculations */
-#define SCHED_LOAD_SCALE (1 << SCHED_LOAD_SHIFT)
+#define SCHED_LOAD_SCALE (1UL << SCHED_LOAD_SHIFT)
 
 #define SD_FLAG_NEWIDLE		1	/* Balance when about to become idle */
 #define SD_FLAG_EXEC		2	/* Balance on exec */

_

#17 lore raw
In reply to Andrew Morton
Quoted 4 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.4/2.6.4-mm1/
- The CPU scheduler changes in -mm (sched-domains) have been hanging about for too long. I had been hoping that the people who care about SMT and NUMA performance would have some results by now but all seems to be silent.

Looks like some ppl punted on arch code sweeps. Results of one-off fixing for a box with a couple of spindles in its boot bay to check out the writeback and unplug goodies below.

-- wli

arch/sparc64/kernel/process.c +1 -0
diff -urpN mm1-2.6.4-2/arch/sparc64/kernel/process.c mm1-2.6.4-3/arch/sparc64/kernel/process.c
@@ -41,6 +41,7 @@
 #include <asm/fpumacro.h>
 #include <asm/head.h>
 #include <asm/cpudata.h>
+#include <asm/unistd.h>
 
 /* #define VERBOSE_SHOWREGS */
 
fs/compat_ioctl.c +1 -1
diff -urpN mm1-2.6.4-2/fs/compat_ioctl.c mm1-2.6.4-3/fs/compat_ioctl.c
@@ -1604,7 +1604,7 @@ static int vt_check(struct file *file)
 	 * To have permissions to do most of the vt ioctls, we either have
 	 * to be the owner of the tty, or super-user.
 	 */
-	if (current->tty == tty || capable(CAP_SYS_ADMIN))
+	if (current->signal->tty == tty || capable(CAP_SYS_ADMIN))
 		return 1;
 	return 0;                                                    
 }
fs/proc/proc_misc.c +8 -8
diff -urpN mm1-2.6.4-2/fs/proc/proc_misc.c mm1-2.6.4-3/fs/proc/proc_misc.c
@@ -383,13 +383,13 @@ int show_stat(struct seq_file *p, void *
 	}
 
 	seq_printf(p, "cpu  %llu %llu %llu %llu %llu %llu %llu\n",
-		jiffies_64_to_clock_t(user),
-		jiffies_64_to_clock_t(nice),
-		jiffies_64_to_clock_t(system),
-		jiffies_64_to_clock_t(idle),
-		jiffies_64_to_clock_t(iowait),
-		jiffies_64_to_clock_t(irq),
-		jiffies_64_to_clock_t(softirq));
+		(unsigned long long)jiffies_64_to_clock_t(user),
+		(unsigned long long)jiffies_64_to_clock_t(nice),
+		(unsigned long long)jiffies_64_to_clock_t(system),
+		(unsigned long long)jiffies_64_to_clock_t(idle),
+		(unsigned long long)jiffies_64_to_clock_t(iowait),
+		(unsigned long long)jiffies_64_to_clock_t(irq),
+		(unsigned long long)jiffies_64_to_clock_t(softirq));
 	for_each_cpu(i) {
 		/* two separate calls here to work around gcc-2.95.3 ICE */
 		seq_printf(p, "cpu%d %llu %llu %llu ",
@@ -410,7 +410,7 @@ int show_stat(struct seq_file *p, void *
 			(unsigned long long)
 			  jiffies_64_to_clock_t(kstat_cpu(i).cpustat.softirq));
 	}
-	seq_printf(p, "intr %llu", sum);
+	seq_printf(p, "intr %llu", (unsigned long long)sum);
 
 #if !defined(CONFIG_PPC64) && !defined(CONFIG_ALPHA)
 	for (i = 0; i < NR_IRQS; i++)
fs/udf/super.c +1 -0
diff -urpN mm1-2.6.4-2/fs/udf/super.c mm1-2.6.4-3/fs/udf/super.c
@@ -57,6 +57,7 @@
 #include <linux/smp_lock.h>
 #include <linux/buffer_head.h>
 #include <linux/vfs.h>
+#include <linux/vmalloc.h>
 #include <asm/byteorder.h>
 
 #include <linux/udf_fs.h>
include/asm-sparc64/compat.h +1 -0
diff -urpN mm1-2.6.4-2/include/asm-sparc64/compat.h mm1-2.6.4-3/include/asm-sparc64/compat.h
@@ -29,6 +29,7 @@ typedef s32		compat_int_t;
 typedef s32		compat_long_t;
 typedef u32		compat_uint_t;
 typedef u32		compat_ulong_t;
+typedef u32		compat_timer_t;
 
 struct compat_timespec {
 	compat_time_t	tv_sec;
include/asm-sparc64/pgtable.h +10 -3
diff -urpN mm1-2.6.4-2/include/asm-sparc64/pgtable.h mm1-2.6.4-3/include/asm-sparc64/pgtable.h
@@ -322,9 +322,16 @@ static inline pte_t mk_pte_io(unsigned l
 
 /* File offset in PTE support. */
 #define pte_file(pte)		(pte_val(pte) & _PAGE_FILE)
-#define pte_to_pgoff(pte)	(pte_val(pte) >> PAGE_SHIFT)
-#define pgoff_to_pte(off)	(__pte(((off) << PAGE_SHIFT) | _PAGE_FILE))
-#define PTE_FILE_MAX_BITS	(64UL - PAGE_SHIFT - 1UL)
+#define __pte_to_pgprot(pte) \
+		__pgprot(pte_val(pte) & (_PAGE_READ|_PAGE_WRITE))
+#define __file_pte_to_pgprot(pte) \
+		__pgprot(((pte_val(pte) >> PAGE_SHIFT) & 0x3UL) << 8)
+#define pte_to_pgprot(pte) \
+	(pte_file(pte) ? __file_pte_to_pgprot(pte) : __pte_to_pgprot(pte))
+#define pte_to_pgoff(pte)	(pte_val(pte) >> (PAGE_SHIFT+2))
+#define pgoff_prot_to_pte(off, prot) \
+	(__pte(((off) << (PAGE_SHIFT+2)) | _PAGE_FILE | ((prot >> 8) & 0x3UL)))
+#define PTE_FILE_MAX_BITS	(64UL - PAGE_SHIFT - 3UL)
 
 extern unsigned long prom_virt_to_phys(unsigned long, int *);
 
#18 lore raw

Review

Quoted 3 lines · William Lee Irwin III
(quoted diff) +3 -0
+#define pgoff_prot_to_pte(off, prot) \
+	(__pte(((off) << (PAGE_SHIFT+2)) | _PAGE_FILE | ((prot >> 8) & 0x3UL)))
+#define PTE_FILE_MAX_BITS	(64UL - PAGE_SHIFT - 3UL)

Good thing for me it's rarely exercised. Incremental (one-liner):

include/asm-sparc64/pgtable.h +1 -1
@@ -330,7 +330,7 @@
 	(pte_file(pte) ? __file_pte_to_pgprot(pte) : __pte_to_pgprot(pte))
 #define pte_to_pgoff(pte)	(pte_val(pte) >> (PAGE_SHIFT+2))
 #define pgoff_prot_to_pte(off, prot) \
-	(__pte(((off) << (PAGE_SHIFT+2)) | _PAGE_FILE | ((prot >> 8) & 0x3UL)))
+	((__pte(((off) | ((pgprot_val(prot) >> 8) & 0x3UL)))) << (PAGE_SHIFT+2) | _PAGE_FILE)
 #define PTE_FILE_MAX_BITS	(64UL - PAGE_SHIFT - 3UL)
 
 extern unsigned long prom_virt_to_phys(unsigned long, int *);
#19 lore raw
In reply to Andrew Morton

hey andrew, i have a problem with this kernel, when it boots, it lists vp_ide and stuff, and then suddenly after that my screen gets flodded with sys traces and stuff, i cant even read it, so fast they come, and the syste doesnet go further, i havent tried 2.6.4 vanilla yet, but i will now.

if u got any ideas, please tell me, and i will test

Quoted 1,177 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.4/2.6.4-mm1/

- The CPU scheduler changes in -mm (sched-domains) have been hanging about for too long. I had been hoping that the people who care about SMT and NUMA performance would have some results by now but all seems to be silent.

I do not wish to merge these up until the big-iron guys can say that they suit their requirements, with a reasonable expectation that we will not need to churn this code later in the 2.6 series.

So. If you have been testing, please speak up. If you have not been testing, please do so.

- Major surgery against the pagecache, radix-tree and writeback code. This work is to address the O_DIRECT-vs-buffered data exposure horrors which we've been struggling with for months.

As a side-effect, 32 bytes are saved from struct inode and eight bytes are removed from struct page.

This change will break any arch code which is using page->list and will also break any arch code which is using page->lru of memory which was obtained from slab.

It seems to work OK here, but I suggest people not rush out and convert all of the corporate finance department's servers to 2.6.4-mm1.

The basic problem which we (mainly Daniel McNeil) have been struggling with is in getting a really reliable fsync() across the page lists while other processes are performing writeback against the same file. It's like juggling four bars of wet soap with your eyes shut while someone is whacking you with a baseball bat. Daniel pretty much has the problem plugged but I suspect that's just because we don't have testcases to trigger the remaining problems. The complexity and additional locking which those patches add is worrisome.

So the approach taken here is to remove the page lists altogether and replace the list-based writeback and wait operations with in-order radix-tree walks.

The radix-tree code has been enhanced to support "tagging" of pages, for later searches for pages which have a particular tag set. This means that we can ask the radix tree code "find me the next 16 dirty pages starting at pagecache index N" and it will do that in O(log64(N)) time.

This affects I/O scheduling potentially quite significantly. It is no longer the case that the kernel will submit pages for I/O in the order in which the application dirtied them. We instead submit them in file-offset order all the time.

This is likely to be advantageous when applications are seeking all over a large file randomly writing small amounts of data. I haven't performed much benchmarking, but tiobench random write throughput seems to be increased by 30%. Other tests appear to be unaltered. dbench may have got 10-20% quicker, but it's variable.

There is one large file which everyone seeks all over randomly writing small amounts of data: the blockdev mapping which caches filesystem metadata. The kernel's IO submission patterns for this are now ideal.

Because writeback and wait-for-writeback use a tree walk instead of a list walk they are no longer livelockable. This probably means that we no longer need to hold i_sem across O_SYNC writes and perhaps fsync() and fdatasync(). This may be beneficial for databases: multiple processes writing and syncing different parts of the same file at the same time can now all submit and wait upon writes to just their own little bit of the file, so we can get a lot more data into the queues.

It is trivial to implement a part-file-fdatasync() as well, so applications can say "sync the file from byte N to byte M", and multiple applications can do this concurrently. This is easy for ext2 filesystems, but probably needs lots of work for data-journalled filesystems and XFS and it probably doesn't offer much benefit over an i_semless O_SYNC write.

- Dropped the hotplug CPU patches: bits of them were merged into Linus's kernel and things broke.

- Various little fixes as usual.

Changes since 2.6.4-rc2-mm1:

bk-acpi.patch
bk-alsa.patch
bk-driver-core.patch
bk-i2c.patch
bk-input.patch
bk-netdev.patch
bk-pci.patch
bk-scsi.patch
bk-usb.patch

Latest external trees

(quoted diff) +46 -18
-export-filemap_flush.patch
-vma-corruption-fix.patch
-centaur-crypto-core-support.patch
 
 Merged
 
+bk-acpi-warning-fix.patch
 
 Fix a warning
 
+x86_64-update.patch
 
 Latest x86_64 code drop
 
+print-kernel-version-in-oops.patch
 
 Display the kernel version in the x86 oops message
 
+ppc64-iseries-virtual-console-fix.patch
 
 iSeries device number fix
 
-zap_page_range-debug.patch
 
 Turns out the code path which this patch was trying to detect the deadness
 of is in fact used.
 
+sched-stats-64-bit.patch
 
 Use 64-bit numbers for various CPU scheduler statistics
 
-hotplugcpu-generalise-bogolock.patch
-hotplugcpu-generalise-bogolock-fix-for-kthread-stop-using-signals.patch
-hotplugcpu-use-bogolock-in-modules.patch
-hotplugcpu-core.patch
-stop_machine-warning-fix.patch
-hotplugcpu-core-sparc64-build-fix.patch
-hotplugcpu-core-fix-for-kthread-stop-using-signals.patch
-migrate_to_cpu-dependency-fix.patch
-hotplugcpu-core-drain_local_pages-fix.patch
-hotplugcpu-rcupdate-many-cpus-fix.patch
 
 Dropped
 
-ext3-dirty-debug-patch.patch
 
 This debug trap never triggered
 
-fusion-use-min-max.patch
 
 Other changes broke this
 
+dm-map-rwlock-ng.patch
 
 New version of spinlocking for the device mapper map tables
 
+dm-remove-__dm_request.patch
 
 Remvoe __dm_request()
 
+md-array-assembly-major-fix.patch
 
 RAID fix
 
+fadvise-fixups.patch
 
 Fix some fadvise() boundary conditions
 
+validate_mm-fixes.patch
 
 Enhance validate_mm()
 
+3ware-update.patch
 
 3ware driver update
 
+3c59x-xcvr-fix.patch
 
 Fix 3c59x transceiver handling
 
+current_is_keventd-speedup.patch
 
 Simplify current_is_keventd()
 
+root-ramdisk-fix.patch
 
 Make "root=/dev/ram" work again
 
+cciss-per-device-queues.patch
 
 per-device queues for the cciss driver
 
+blkdev-fix-final-page.patch
 
 Fix reads of the final block of blockdevs
 
+wavfront-needs-syscalls_h.patch
 
 Warning (and possible oops) fixes
 
+edd-legacy-parameters-fix.patch
 
 EDD back-compatibility
 
+cciss-section-fix.patch
 
 __init section fix
 
+pte_chain-nowarns.patch
 
 Prevent possible-but-expected page allocator warnings
 
+macintosh-config-fix.patch
 
 Don't offer mac drivers on other platforms
 
+applicom-warning-fix.patch
 
 Fix a warning
 
+CONFIG_NVRAM-dependencies.patch
 
 Fix NVRAM dependencies
 
+move-job-control-stuff-tosignal_struct.patch
 
 Move various job control fields out of the task_struct and into the
 signal_struct.
 
+module_h-attribute_used-fix.patch
 
 __attribute_used__ sanity
 
+kobject-module-request-64-bit-fix.patch
 
 Fix for 64-bit machines
 
+sch_htb-fix.patch
 
 netfilter 64-bit fix
 
+blk-congestion-races.patch
 
 Conceivably fix rare races in blk_congestion_wait()
 
+vm-lrutopage-cleanup.patch
 
 Add a handy macro to tidy up vmscan.c
 
+radix-tree-tagging.patch
 
 Add search tagging to radix trees.
 
+irq-safe-pagecache-lock.patch
 
 Make mapping->page_lock irq-safe, and rename it to tree_lock to detect
 missed conversions.
 
+tag-dirty-pages.patch
 
 Tag dirty pages as being dirty within their radix trees.
 
+tag-writeback-pages.patch
 
 Tag writeback pages as being under writeback in their radix trees
 
+stop-using-dirty-pages.patch
+stop-using-io-pages.patch
+stop-using-locked-pages.patch
+stop-using-clean-pages.patch
 
 Wean the kernel off the four address_space page lists
 
+unslabify-pgds-and-pmds.patch
 
 We cannot use page->lru to manage slab-derived pages: slab itself wants to
 use it.
 
+slab-stop-using-page-list.patch
 
 Switch slab page management from page->list to page->lru.
 
+page_alloc-stop-using-page-list.patch
 
 Switch the page allocator from using page->list to using page->lru.
 
+hugetlb-stop-using-page-list.patch
 
 Switch the hugetlbpage implementations from using page->list to using
 page->lru.
 
+pageattr-stop-using-page-list.patch
 
 Switch the pageattr code (CONFIG_DEBUG_PAGEALLOC) from using page->list to
 using page->lru.
 
+readahead-stop-using-page-list.patch
 
 Switch the readpages() API from using page->list over to using page->lru.
 
+compound-pages-stop-using-lru.patch
 
 Teach the compound page management to use page fields other than page->list.
 
+remove-page-list.patch
 
 Remove the `list' field from struct page.
 
+remap-file-pages-prot-ia64-2.6.4-rc2-mm1-A0.patch
 
 Implement the per-page-permissions-in-remap_file_pages for ia64.  Hasn't
 been tested.
 
-4g4g-THREAD_SIZE-fixes.patch
-4g4g-handle_BUG-fix.patch
 
 Folded into 4g-2.6.0-test2-mm2-A5.patch

O_DIRECT-vs-buffered-fix.patch
O_DIRECT-vs-buffered-fix-pdflush-hang-fix.patch
serialise-writeback-fdatawait.patch
restore-writeback-trylock.patch

Dropped. Hopefully we don't need these any more.

All 258 patches:

bk-acpi.patch

bk-alsa.patch

bk-driver-core.patch

bk-i2c.patch

bk-input.patch

bk-netdev.patch

bk-pci.patch

bk-scsi.patch

bk-usb.patch

mm.patch
add -mmN to EXTRAVERSION

dma_sync_for_device-cpu.patch
dma_sync_for_{cpu,device}()

bk-acpi-warning-fix.patch
bk-acpi warning fixes

x86_64-update.patch
x86-64 merge for 2.6.4

move-dma_consistent_dma_mask.patch
move consistent_dma_mask to the generic device

move-dma_consistent_dma_mask-x86_64-fix.patch

move-dma_consistent_dma_mask-sn-fix.patch
Fix dma_mask patch for sn platform

print-kernel-version-in-oops.patch
print kernel version in oops messages

kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)

kgdb-ga-recent-gcc-fix.patch
kgdb: fix for recent gcc

kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll

kgdboe-non-ia32-build-fix.patch

kgdb-warning-fixes.patch
kgdb warning fixes

kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3

kgdb-THREAD_SIZE-fixes.patch
THREAD_SIZE fixes for kgdb

must-fix.patch
must fix lists update
must fix list update
mustfix update

must-fix-update-5.patch
must-fix update

ppc64-iseries-virtual-console-fix.patch
ppc64: fix iSeries virtual console devices

ppc64-reloc_hide.patch

compat-signal-noarch-2004-01-29.patch
Generic 32-bit compat for copy_siginfo_to_user

compat-generic-ipc-emulation.patch
generic 32 bit emulation for System-V IPC

remove-sys_ioperm-stubs.patch
Clean up sys_ioperm stubs

readdir-cleanups.patch
readdir() cleanups

ext3-journalled-quotas-2.patch
ext3: journalled quota

invalidate_inodes-speedup.patch
invalidate_inodes speedup
more invalidate_inodes speedup fixes

cfq-4.patch
CFQ io scheduler
CFQ fixes

config_spinline.patch
uninline spinlocks for profiling accuracy.

pdflush-diag.patch

get_user_pages-handle-VM_IO.patch
fix get_user_pages() against mappings of /dev/mem

pci_set_power_state-might-sleep.patch

CONFIG_STANDALONE-default-to-n.patch
Make CONFIG_STANDALONE default to N

extra-buffer-diags.patch

CONFIG_SYSFS.patch
From: Pat Mochel <[email protected]>
Subject: [PATCH] Add CONFIG_SYSFS

CONFIG_SYSFS-boot-from-disk-fix.patch

slab-leak-detector.patch
slab leak detector
mm/slab.c warning in cache_alloc_debugcheck_after

scale-nr_requests.patch
scale nr_requests with TCQ depth

truncate_inode_pages-check.patch

local_bh_enable-warning-fix.patch

sched-stats-64-bit.patch
Use 64-bit counters for scheduler stats

sched-find_busiest_node-resolution-fix.patch
sched: improved resolution in find_busiest_node

sched-domains.patch
sched: scheduler domain support
sched: fix for NR_CPUS > BITS_PER_LONG
sched: clarify find_busiest_group
sched: find_busiest_group arithmetic fix

sched-domains-improvements.patch
sched domains kernbench improvements

sched-clock-fixes.patch
fix sched_clock()

sched-sibling-map-to-cpumask.patch
sched: cpu_sibling_map to cpu_mask
p4-clockmod sibling_map fix
p4-clockmod: handle more than two siblings

sched-domains-i386-ht.patch
sched: implement domains for i386 HT
sched: Fix CONFIG_SMT oops on UP
sched: fix SMT + NUMA bug
Change arch_init_sched_domains to use cpu_online_map Fix build with NR_CPUS > BITS_PER_LONG

sched-domain-tweak.patch
i386-sched-domain code consolidation

sched-no-drop-balance.patch
sched: handle inter-CPU jiffies skew

sched-directed-migration.patch
sched_balance_exec(): don't fiddle with the cpus_allowed mask

sched-domain-debugging.patch
sched_domain debugging

sched-domain-balancing-improvements.patch
scheduler domain balancing improvements

sched-group-power.patch
sched-group-power
sched-group-power warning fixes

sched-domains-use-cpu_possible_map.patch
sched_domains: use cpu_possible_map

sched-smt-nice-handling.patch
sched: SMT niceness handling

sched-smt-nice-optimisation.patch
sched: SMT-ice optimisation

fa311-mac-address-fix.patch
wrong mac address with netgear FA311 ethernet card

laptop-mode-2.patch
laptop-mode for 2.6, version 6
Documentation/laptop-mode.txt
laptop-mode documentation updates
Laptop mode documentation addition
laptop mode simplification

pid_max-fix.patch
Bug when setting pid_max > 32k

use-soft-float.patch
Use -msoft-float

DRM-cvs-update.patch
DRM cvs update

drm-include-fix.patch

process-migration-speedup.patch
Reduce TLB flushing during process migration

nfs-31-attr.patch
NFSv2/v3/v4: New attribute revalidation code

nfs-reconnect-fix.patch

nfs-mount-fix.patch
Update to NFS mount....

nfs-d_drop-lowmem.patch
NFS: handle nfs_fhget() error

nfs-avoid-i_size_write.patch
NFS: avoid unlocked i_size_write()

nfs_unlink-oops-fix.patch
nfs: fix "busy inodes after umount"

nfs-remove-XID-spinlock.patch
nfs: Remove an unnecessary spinlock from XID generation...

nfs-misc-rpc-fixes.patch
nfs: Misc RPC fixes...

nfs-improved-writeback-strategy.patch
nfs: improve writeback caching

nfs-simplify-config-options.patch
nfs: simplify client configuration options.

nfs-fix-msync.patch
nfs: fix msync()

nfs-mount-return-useful-errors.patch
nfs: make mount command return more useful errors

nfs-misc-minor-fixes.patch
nfs: misc minor fixes

nfs-lockd-sync-01.patch
nfs: sync lockd to 2.4.x

nfs-lockd-sync-02.patch
nfs: sync lockd to 2.4.x

nfs-lockd-sync-03.patch
nfs: sync lockd to 2.4.x

nfs-lockd-sync-04.patch
nfs: sync lockd to 2.4.x

nfs-rpc-remove-redundant-memset.patch
nfs: remove unnecessary memset() in RPC

nfs-tunable-rpc-slot-table.patch
nfs: make the RPC slot table size a tunable value.

nfs-short-read-fix.patch
nfs: fix an NFSv2 read bug

nfs-server-in-root_server_path.patch
Pull NFS server address out of root_server_path

non-readable-binaries.patch
Handle non-readable binfmt_misc executables

binfmt_misc-credentials.patch
binfmt_misc: improve calaulation of interpreter's credentials

initramfs-search-for-init.patch
search for /init for initramfs boots

adaptive-lazy-readahead.patch
adaptive lazy readahead

sysfs_remove_dir-race-fix.patch
sysfs_remove_dir-vs-dcache_readdir race fix

sysfs_remove_subdir-dentry-leak-fix.patch
Fix dentry refcounting in sysfs_remove_group()

per-node-rss-tracking.patch
Track per-node RSS for NUMA

aic7xxx-deadlock-fix.patch
aic7xxx deadlock fix

futex_wait-debug.patch
futex_wait debug

module_exit-deadlock-fix.patch
module unload deadlock fix

selinux-inode-race-trap.patch
Try to diagnose Bug 2153

ufs2-01.patch
read-only support for UFS2

ide-scsi-error-handling-fixes.patch
ide-scsi error handling fixes

ide-scsi-error-handling-update.patch
ide-scsi error handler update

fb_console_init-fix.patch
fb_console_init fix

poll-select-longer-timeouts.patch
poll()/select(): support longer timeouts

poll-select-range-check-fix.patch
poll()/select() range checking fix

poll-select-handle-large-timeouts.patch
poll()/select(): handle long timeouts

pcmcia-debugging-rework-1.patch
Overhaul PCMCIA debugging (1)

cs_err-compile-fix.patch
pcmcia: workaround for gcc-2.95 bug in cs_err()

pcmcia-debugging-rework-2.patch
Overhaul PCMCIA debugging (2)

distribute-early-allocations-across-nodes.patch
Manfred's patch to distribute boot allocations across nodes

time-interpolator-fix.patch
time interpolator fix

kmsg-nonblock.patch
teach /proc/kmsg about O_NONBLOCK

mixart-build-fix.patch
CONFIG_SND_MIXART doesn't compile

add-a-slab-for-ethernet.patch
Add a kmalloc slab for ethernet packets

remove-__io_virt_debug.patch
remove __io_virt_debug

genrtc-cleanups.patch
genrtc: cleanups

piix_ide_init-can-be-__init.patch
piix_ide_init can be __init

i386-early-memory-cleanup.patch
i386 very early memory detection cleanup patch

modular-mce-handler.patch
Allow X86_MCE_NONFATAL to be a module

remove-more-KERNEL_SYSCALLS.patch
further __KERNEL_SYSCALLS__ removal
build fix for remove-more-KERNEL_SYSCALLS.patch
fix the build for remove-more-KERNEL_SYSCALLS

mq-01-codemove.patch
posix message queues: code move

mq-02-syscalls.patch
posix message queues: syscall stubs

mq-03-core.patch
posix message queues: implementation

mq-03-core-update.patch
posix message queues: update to core patch

mq-04-linuxext-poll.patch
posix message queues: linux-specific poll extension

mq-05-linuxext-mount.patch
posix message queues: made user mountable

mq-update-01.patch
posix message queue update

mq-security-fix.patch
security bugfix for mqueue

dm-01-endio-method.patch
dm: endio method

dm-03-list_for_each_entry-audit.patch
dm: list_for_each_entry audit

dm-04-default-queue-limits-fix.patch
dm: default queue limits

dm-05-list-targets-command.patch
dm: list targets cmd

dm-06-stripe-width-fix.patch
dm: stripe width fix

queue-congestion-callout.patch
Add queue congestion callout

queue-congestion-dm-implementation.patch
Implement queue congestion callout for device mapper

dm-maplock.patch
devicemapper: use rwlock for map alterations

dm-map-rwlock-ng.patch
Another DM maplock implementation

dm-remove-__dm_request.patch
dmL remove __dm_request

use-wait_task_inactive-in-kthread_bind.patch
use wait_task_inactive() in kthread_bind()

HPFS1-hpfs2-RC4-rc1.patch

HPFS2-hpfs_namei-RC4-rc1.patch

selinux-cleanup-binary-mount-data.patch
selinux: clean up binary mount data

udffs-update.patch
UDF filesystem update

kbuild-redundant-CFLAGS.patch
kbuild: Remove CFLAGS assignment in i386/mach-*/Makefile

numa-aware-zonelist-builder.patch
NUMA-aware zonelist builder
numa-aware zonelist builder fix
numa-aware node builder fix #2

remove-redundant-unplug_timer-deletion.patch
Redundant unplug_timer deletion

queue_work_on_cpu.patch
Add queue_work_on_cpu() workqueue function

m68k-rename-sys_functions.patch
m68k: rename sys_* functions

pdc202xx_new-update.patch
ide: update for pdc202xx_new driver

siimage-update.patch
ide: update for siimage driver

ide-cleanups-01.patch
ide: IDE cleanups

ide-cleanups-02.patch
ide: IDE cleanups

ide-cleanups-03.patch
ide: IDE cleanups

cdromaudio-use-dma.patch
use DMA for CDROM audio reading

sysfs-pin-kobject.patch
sysfs: pin kobjects to fix use-after-free crashes

ATI-IXP-IDE-support.patch
ATI IXP IDE support

ipmi-updates-3.patch
IPMI driver updates

ipmi-socket-interface.patch
IPMI: socket interface

md-use-schedule_timeout.patch
md: use "shedule_timeout(2)" instead of yield()

md-array-assembly-fix.patch
md: allow assembling of partitioned arrays at boot time.

md-array-assembly-major-fix.patch
md array assembly major number fix

compiler_h-scope-fixes.patch
compiler.h scoping fixes

nmi_watchdog-local-apic-fix.patch
Fix nmi_watchdog=2 and P4 HT

nmi-1-hz.patch
set nmi_hz to 1 with nmi_watchdog=2 and SMP

elf-mmap-fix.patch
Fix elf mapping of the zero page

kbuild-more-cleaning.patch
kbuild: Cause `make clean' to remove more files

LOOP_CHANGE_FD.patch
LOOP_CHANGE_FD ioctl

loop-setup-race-fix.patch
loop setup race fix

handle-dot-o-paths.patch
kbuild: fix usage with directories containing '.o'

acpi-asmlinkage-fix.patch
gcc-3.5: acpi build fix

ipc-sem-extra-sem_unlock.patch
Remove unneeded unlock in ipc/sem.c

procfs-dangling-subdir-fix.patch
/proc data corruption check

AMD-768MPX-bootmem-fix.patch
Work around an AMD768MPX erratum

i810fb-on-x86_64.patch
Enable i810 fb on x86-64

ext23-remove-acl-limits.patch
Remove arbitrary #acl entries limits on ext[23] when reading

watchdog-moduleparam-patches.patch
watchdog: moduleparam-patches

amd-elan-fix.patch
AMD ELAN Kconfig fix

pcmcia-netdev-ordering-fixes.patch
PCMCIA netdevice ordering issues

fadvise-fixups.patch
fadvise(POSIX_FADV_DONTNEED) fixups

validate_mm-fixes.patch
Fix and harden validate_mm

3ware-update.patch
3ware driver update

3c59x-xcvr-fix.patch
Fix 3c59x transceiver handling

current_is_keventd-speedup.patch
current_is_keventd() speedup

root-ramdisk-fix.patch
Fix rootfs on ramdisk

cciss-per-device-queues.patch
cciss: per device queues

blkdev-fix-final-page.patch
Fix reading the last block on a bdev

wavfront-needs-syscalls_h.patch
wavfront.c needs syscalls.h

edd-legacy-parameters-fix.patch
EDD: Get Legacy Parameters

cciss-section-fix.patch
cciss: init section fix

pte_chain-nowarns.patch
add nowarn to a few pte chain allocators

macintosh-config-fix.patch
Disable Macintosh device drivers for all but PPC || MAC

applicom-warning-fix.patch
Applicom warning

CONFIG_NVRAM-dependencies.patch
Fix CONFIG_NVRAM dependencies

move-job-control-stuff-tosignal_struct.patch
moef job control fields from task_struct to signal_struct

module_h-attribute_used-fix.patch
module.h __attribute_used__ fix

kobject-module-request-64-bit-fix.patch
Fix a 64bit bug in kobject module request

sch_htb-fix.patch
net: fix sch_htb on 64-bit

instrument-highmem-page-reclaim.patch
vm: per-zone vmscan instrumentation

blk_congestion_wait-return-remaining.patch
return remaining jiffies from blk_congestion_wait()

blk-congestion-races.patch
Narrow blk_congestion_wait races

vmscan-remove-priority.patch
mm/vmscan.c: remove unused priority argument.

kswapd-throttling-fixes.patch
kswapd throttling fixes

vm-refill_inactive-preserve-referenced.patch
vmscan: preserve page referenced info in refill_inactive()

shrink_slab-precision-fix.patch
shrink_slab: math precision fix

try_to_free_pages-shrink_slab-evenness.patch
vm: shrink slab evenly in try_to_free_pages()

vmscan-total_scanned-fix.patch
vmscan: fix calculation of number of pages scanned

shrink_slab-for-all-zones-2.patch
vm: scan slab in response to highmem scanning

zone-balancing-fix-2.patch
vmscan: zone balancing fix

vmscan-control-by-nr_to_scan-only.patch
vmscan: drive everything via nr_to_scan

vmscan-balance-zone-scanning-rates.patch
Balance inter-zone scan rates

vmscan-dont-throttle-if-zero-max_scan.patch
vmscan: avoid bogus throttling

kswapd-avoid-higher-zones.patch
kswapd: avoid unnecessary reclaiming from higher zones

kswapd-avoid-higher-zones-reverse-direction.patch
kswapd: fix lumpy page reclaim

kswapd-avoid-higher-zones-reverse-direction-fix.patch
fix the kswapd zone scanning algorithm

vmscan-throttle-later.patch
vmscan: less throttling of page allocators and kswapd

vm-batch-inactive-scanning.patch
vmscan: batch up inactive list scanning work

vm-batch-inactive-scanning-fix.patch
fix vm-batch-inactive-scanning.patch

vm-balance-refill-rate.patch
vm: balance inactive zone refill rates

vm-lrutopage-cleanup.patch
vmscan: add lru_to_page() helper

slab-no-higher-order.patch
slab: avoid higher-order allocations

O_DIRECT-race-fixes-rollup.patch
O_DIRECT data exposure fixes

O_DIRECT-ll_rw_block-vs-block_write_full_page-fix.patch
Fix race between ll_rw_block() and block_write_full_page()

blockdev-direct-io-speedup.patch
blockdev direct-io speedups

dio-aio-fixes.patch
direct-io AIO fixes

aio-fallback-bio_count-race-fix-2.patch
AIO+DIO bio_count race fix

aio-direct-io-oops-fix.patch
AIO/direct-io oops fix

radix-tree-tagging.patch
radix-tree tags for selective lookup

irq-safe-pagecache-lock.patch
make the pagecache lock irq-safe.

tag-dirty-pages.patch
tag dirty pages as such in the radix tree

tag-writeback-pages.patch
tag writeback pages as such in their radix tree

stop-using-dirty-pages.patch
stop using the address_space dirty_pages list

stop-using-io-pages.patch
remove address_space.io_pages

stop-using-locked-pages.patch
Stop using address_space.locked_pages

stop-using-clean-pages.patch
stop using address_space.clean_pages

unslabify-pgds-and-pmds.patch
revert the slabification of i386 pgd's and pmd's

slab-stop-using-page-list.patch
slab: stop using page.list

page_alloc-stop-using-page-list.patch
stop using page.list in the page allocator

hugetlb-stop-using-page-list.patch
stop using page->list in the hugetlbpage implementations

pageattr-stop-using-page-list.patch
stop using page.list in pageattr.c

readahead-stop-using-page-list.patch
stop using page.list in readahead

compound-pages-stop-using-lru.patch
stop using page->lru in compound pages

remove-page-list.patch
remove page.list

remap-file-pages-prot-2.6.4-rc1-mm1-A1.patch
per-page protections for remap_file_pages()

remap-file-pages-prot-ia64-2.6.4-rc2-mm1-A0.patch
remap_file_pages page-prot implementation for ia64

list_del-debug.patch
list_del debug check

oops-dump-preceding-code.patch
i386 oops output: dump preceding code

lockmeter.patch
lockmeter

lockmeter-ia64-fix.patch
ia64 CONFIG_LOCKMETER fix

4g-2.6.0-test2-mm2-A5.patch
4G/4G split patch
4G/4G: remove debug code
4g4g: pmd fix
4g/4g: fixes from Bill
4g4g: fpu emulation fix
4g/4g usercopy atomicity fix
4G/4G: remove debug code
4g4g: pmd fix
4g/4g: fixes from Bill
4g4g: fpu emulation fix
4g/4g usercopy atomicity fix
4G/4G preempt on vstack
4G/4G: even number of kmap types
4g4g: fix __get_user in slab
4g4g: Remove extra .data.idt section definition
4g/4g linker error (overlapping sections)
4G/4G: remove debug code
4g4g: pmd fix
4g/4g: fixes from Bill
4g4g: fpu emulation fix
4g4g: show_registers() fix
4g/4g usercopy atomicity fix
4g4g: debug flags fix
4g4g: Fix wrong asm-offsets entry
cyclone time fixmap fix
4G/4G preempt on vstack
4G/4G: even number of kmap types
4g4g: fix __get_user in slab
4g4g: Remove extra .data.idt section definition
4g/4g linker error (overlapping sections)
4G/4G: remove debug code
4g4g: pmd fix
4g/4g: fixes from Bill
4g4g: fpu emulation fix
4g4g: show_registers() fix
4g/4g usercopy atomicity fix
4g4g: debug flags fix
4g4g: Fix wrong asm-offsets entry
cyclone time fixmap fix
use direct_copy_{to,from}_user for kernel access in mm/usercopy.c 4G/4G might_sleep warning fix
4g/4g pagetable accounting fix
Fix 4G/4G and WP test lockup
4G/4G KERNEL_DS usercopy again
Fix 4G/4G X11/vm86 oops
Fix 4G/4G athlon triplefault
4g4g SEP fix
Fix 4G/4G split fix for pre-pentiumII machines
4g/4g PAE ACPI low mappings fix
zap_low_mappings() cannot be __init
4g/4g: remove printk at boot
4g4g: fix handle_BUG()
4g4g: acpi sleep fixes

4g4g-locked-userspace-copy.patch
Do a locked user-space copy for 4g/4g

ia32-4k-stacks.patch
ia32: 4Kb stacks (and irqstacks) patch

ia32-4k-stacks-build-fix.patch
4k stacks build fix

4k-stacks-in-modversions-magic.patch
Add 4k stacks to module version magic

ppc-fixes.patch
make mm4 compile on ppc

ppc-fixes-dependency-fix.patch
ppc-fixes dependency fix

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 2 lines
Regards, Redeeman
[email protected]
#20 lore raw
Quoted 4 lines · Redeeman

hey andrew, i have a problem with this kernel, when it boots, it lists vp_ide and stuff, and then suddenly after that my screen gets flodded with sys traces and stuff, i cant even read it, so fast they come, and the syste doesnet go further

Same here. bad: scheduling while atomic. .config attached (no dmesg as I have no experience with serial consoles yet.)

HTH,
Norberto

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_IOSCHED_NOOP is not set
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_X86_4G is not set
# CONFIG_X86_SWITCH_PAGETABLES is not set
# CONFIG_X86_4G_VM_LAYOUT is not set
# CONFIG_X86_UACCESS_INDIRECT is not set
# CONFIG_X86_HIGH_ENTRY is not set
CONFIG_HPET_TIMER=y
# CONFIG_HPET_EMULATE_RTC is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_PM_DISK is not set

#
# ACPI (Advanced Configuration and Power Interface) Support #
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_SLEEP is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_USE_VECTOR=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_NAMES is not set
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_PCMCIA_PROBE=y

#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_PCIE is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_FW_LOADER=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_IDEDISK_STROKE=y
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_TASKFILE_IO=y

#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_REPORT_LUNS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=m
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_RAID6 is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_BLK_DEV_DM is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETFILTER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_8139_RXBUF_IDX=1
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=2048
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=2048
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=m
CONFIG_SERIO_I8042=m
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# I2C support
#
CONFIG_I2C=m
# CONFIG_I2C_CHARDEV is not set

#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_ELV is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VELLEMAN is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set

#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set

#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
# CONFIG_FB is not set
CONFIG_VIDEO_SELECT=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set

#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_STORAGE is not set

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_W9968CF is not set

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_TEST is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
# CONFIG_FAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="utf8"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
CONFIG_CRC32=m
CONFIG_ZLIB_INFLATE=m
CONFIG_X86_BIOS_REBOOT=y

#21 lore raw
Quoted 9 lines · Norberto Bensa
Quoted 4 lines · Redeeman

hey andrew, i have a problem with this kernel, when it boots, it lists vp_ide and stuff, and then suddenly after that my screen gets flodded with sys traces and stuff, i cant even read it, so fast they come, and the syste doesnet go further

Same here. bad: scheduling while atomic. .config attached (no dmesg as I have no experience with serial consoles yet.)

Did you remove the spin_unlock_irq() from the end of mpage_writepages()?

#22 lore raw

i didnt do anything more than patch with mm1, is there a patch for doing that spin_unlock_irq()? :)

Quoted 12 lines · Andrew Morton
Quoted 9 lines · Norberto Bensa
Quoted 4 lines · Redeeman

hey andrew, i have a problem with this kernel, when it boots, it lists vp_ide and stuff, and then suddenly after that my screen gets flodded with sys traces and stuff, i cant even read it, so fast they come, and the syste doesnet go further

Same here. bad: scheduling while atomic. .config attached (no dmesg as I have no experience with serial consoles yet.)

Did you remove the spin_unlock_irq() from the end of mpage_writepages()?

Signature · 2 lines
Regards, Redeeman
[email protected]
#23 lore raw
Quoted 3 lines · Redeeman

i didnt do anything more than patch with mm1, is there a patch for doing that spin_unlock_irq()? :)

fs/mpage.c renamed from fs/mpage.c~a +0 -1
@@ -672,7 +672,6 @@ mpage_writepages(struct address_space *m
 		}
 		pagevec_release(&pvec);
 	}
-	spin_unlock_irq(&mapping->tree_lock);
 	if (bio)
 		mpage_bio_submit(WRITE, bio);
 	return ret;

_

#24 lore raw

gonna try now, already compiling... i will come back with details in a few minutes..

Quoted 23 lines · Andrew Morton
Quoted 3 lines · Redeeman

i didnt do anything more than patch with mm1, is there a patch for doing that spin_unlock_irq()? :)

fs/mpage.c renamed from fs/mpage.c~a +0 -1
@@ -672,7 +672,6 @@ mpage_writepages(struct address_space *m
 		}
 		pagevec_release(&pvec);
 	}
-	spin_unlock_irq(&mapping->tree_lock);
 	if (bio)
 		mpage_bio_submit(WRITE, bio);
 	return ret;

_

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 2 lines
Regards, Redeeman
[email protected]
#25 lore raw

yeah andrew it works! you are god!!
while i got you here, i have got a pray more for you.

its about amd64-agp. i never had it working (from 2.6.1 mm and vanilla) but in 2.6.4-rc1-mm2 it worked! but sadly abit unstable :(

my big problem is that when using X, and having some windows opens, it consumes ALL cpu if amd64-agp isnt in kernel, so i would REALLY apreciate if you could look at it (sorry my bad english)

thanks!

Quoted 27 lines · Redeeman

gonna try now, already compiling... i will come back with details in a few minutes..

Quoted 23 lines · Andrew Morton
Quoted 3 lines · Redeeman

i didnt do anything more than patch with mm1, is there a patch for doing that spin_unlock_irq()? :)

fs/mpage.c renamed from fs/mpage.c~a +0 -1
@@ -672,7 +672,6 @@ mpage_writepages(struct address_space *m
 		}
 		pagevec_release(&pvec);
 	}
-	spin_unlock_irq(&mapping->tree_lock);
 	if (bio)
 		mpage_bio_submit(WRITE, bio);
 	return ret;

_

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 2 lines
Regards, Redeeman
[email protected]
#26 lore raw
In reply to Andrew Morton
Quoted 9 lines · Andrew Morton
Quoted 6 lines · Norberto Bensa
Quoted 2 lines · Redeeman

hey andrew, i have a problem with this kernel, when it boots, it lists vp_ide and stuff, and then suddenly after that my screen gets flodded

Same here. bad: scheduling while atomic. .config attached (no dmesg as I
have no experience with serial consoles yet.)

Did you remove the spin_unlock_irq() from the end of mpage_writepages()?

Done now.

$ uname -a
Linux venkman 2.6.4-mm1 #2 Thu Mar 11 15:18:21 ART 2004 i686 Pentium III 
(Coppermine) GenuineIntel GNU/Linux

Thanks Andrew!

Norberto

#27 lore raw
In reply to Redeeman
Quoted 5 lines · Redeeman

hey andrew, i have a problem with this kernel, when it boots, it lists vp_ide and stuff, and then suddenly after that my screen gets flodded with sys traces and stuff, i cant even read it, so fast they come, and the syste doesnet go further, i havent tried 2.6.4 vanilla yet, but i will now.

I'm having similar problems, with the kernel crashing with not syncing in interrupt error after a lot of oopses and BUGs. I'm trying to find which patch is causing this, since 2.6.4-rc2-mm1 and 2.6.4 work fine.

I'll post my findings, when they are ready.

#28 lore raw

Re: 2.6.4-mm1 boot

In reply to Andrew Morton

IBM Thinkpad T30, current bios

On a clean boot (not resume - I've not gotten that working):
resuming from /dev/hda8
Resuming from device hda8
bad: scheduling while atomic!

Call Trace:   (abbreviated - doing this by hand on nearby PC)
	schedule+0x5d5
	mempool_alloc+0x64
	generic_unplug_device+0x55
	blk_run_queues+0x79
	io_schedule+0x3
	__wait_on_buffer+0xca
	autoremove_wake_function+0x0
	autoremove_wake_function+0x0  (no, not a typo)
	__bread_slow+0x43
	__bread+0x1b
	bdev_read_page+0x24
	read_suspend_image+0x131
	printk+0x127
	release_console_sem+0xd7
	software_resume+0x7a
	do_initcalls+0x2b
	idedisk_init+0x0
	init+0x0
	init+0x38
	kernel_thread_helper+0x5

Resume Machine: This is normal swap space -------------- [ cut here ] ------------------ kernel BUG at kernel/printk.c:568!
invalid operand: 0000 [#1]
PREEMPT
CPU: 0
EIP: 0060:[<c0122d14>] Not tainted VLI
EFLAGS: 00010206 (2.6.4-mm1)
EIP is at acquire_console_sem+0x14/0x60
eax: dff4f00 ebx: c03f3b88 ecx: c13fb760 edx: c0350578
esi: 0000001 edi: 00000000 ebp: dff4ffa4 esp: dff4ffa0
ds: 007b es: 007b ss: 0068
Process swapper (pid: 1, threadinfo=dff4f000 task=c141d680)
...

Call Trace:
	pm_restore_console+0x12
	software_resume+0x83
	do_initcalls+0x2b
	idedisk_init+0x0
	init+0x0
	init+0x38
	kernel_thread_helper+0x5

Kernel panic: Fatal exception in interrupt

In interrupt handler - not syncing

Signature · 5 lines
Rick Nelson
After watching my newly-retired dad spend two weeks learning how to make a new
folder, it became obvious that "intuitive" mostly means "what the writer or
speaker of intuitive likes".
	-- Bruce Ediger, [email protected], on X the intuitiveness of a Mac interface
#29 lore raw

swsusp (Re: 2.6.4-mm1 boot)

Hi!

Quoted 6 lines

IBM Thinkpad T30, current bios

On a clean boot (not resume - I've not gotten that working):
resuming from /dev/hda8
Resuming from device hda8
bad: scheduling while atomic!

Boot with "noresume", then mkswap /dev/hda8.

Signature · 1 line
64 bytes from 195.113.31.123: icmp_seq=28 ttl=51 time=448769.1 ms         
#30 lore raw

2.6.4-mm1: modular quota needs unknown symbol

In reply to Andrew Morton
Quoted 4 lines · Andrew Morton

...
ext3-journalled-quotas-2.patch
ext3: journalled quota
...

This patch broke modular quota:
WARNING: /lib/modules/2.6.4-mm1/kernel/fs/quota_v2.ko needs unknown symbol mark_info_dirty

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#31 lore raw

Re: 2.6.4-mm1: modular quota needs unknown symbol

On Thursday 11 March 2004 21:23, Adrian Bunk wrote:

Hi Adrian,

Quoted 9 lines · Andrew Morton
Quoted 4 lines

...
ext3-journalled-quotas-2.patch
ext3: journalled quota
...

This patch broke modular quota:
WARNING: /lib/modules/2.6.4-mm1/kernel/fs/quota_v2.ko needs unknown symbol mark_info_dirty

Patch attached (again) ;)

ciao, Marc

fs/dquot.c +1 -0
@@ -1733,3 +1733,4 @@ EXPORT_SYMBOL(dquot_alloc_inode);
 EXPORT_SYMBOL(dquot_free_space);
 EXPORT_SYMBOL(dquot_free_inode);
 EXPORT_SYMBOL(dquot_transfer);
+EXPORT_SYMBOL(mark_info_dirty);
reviewer
#32 lore raw

Re: 2.6.4-mm1: modular quota needs unknown symbol

Quoted 10 lines · Adrian Bunk

Hi Adrian,

Quoted 5 lines · Andrew Morton
Quoted 4 lines

...
ext3-journalled-quotas-2.patch
ext3: journalled quota
...

Quoted 5 lines
Quoted 3 lines

This patch broke modular quota:
WARNING: /lib/modules/2.6.4-mm1/kernel/fs/quota_v2.ko needs unknown symbol mark_info_dirty

Patch attached (again) ;)

Yes, the patch is right... I tested modular filesystem but forgot
about modular quota formats ;(.

Honza

Quoted 7 lines
fs/dquot.c +1 -0
@@ -1733,3 +1733,4 @@ EXPORT_SYMBOL(dquot_alloc_inode);
 EXPORT_SYMBOL(dquot_free_space);
 EXPORT_SYMBOL(dquot_free_inode);
 EXPORT_SYMBOL(dquot_transfer);
+EXPORT_SYMBOL(mark_info_dirty);
Signature · 2 lines
Jan Kara <[email protected]>
SuSE CR Labs
#33 lore raw

2.6.4-mm1: unknown symbols cauased by remove-more-KERNEL_SYSCALLS.patch

In reply to Andrew Morton
Quoted 4 lines · Andrew Morton

...
remove-more-KERNEL_SYSCALLS.patch
further __KERNEL_SYSCALLS__ removal
...

This causes the following unknown symbols in modules on i386:

<-- snip ->

WARNING:
/lib/modules/2.6.4-mm1/kernel/sound/isa/wavefront/snd-wavefront.ko needs unknown symbol sys_read
WARNING:
/lib/modules/2.6.4-mm1/kernel/sound/isa/wavefront/snd-wavefront.ko needs unknown symbol sys_open
WARNING: /lib/modules/2.6.4-mm1/kernel/sound/oss/wavefront.ko needs unknown symbol sys_read
WARNING: /lib/modules/2.6.4-mm1/kernel/sound/oss/wavefront.ko needs unknown symbol sys_open
WARNING:
/lib/modules/2.6.4-mm1/kernel/drivers/media/dvb/frontends/tda1004x.ko needs unknown symbol sys_lseek
WARNING:
/lib/modules/2.6.4-mm1/kernel/drivers/media/dvb/frontends/tda1004x.ko needs unknown symbol sys_read
WARNING:
/lib/modules/2.6.4-mm1/kernel/drivers/media/dvb/frontends/tda1004x.ko needs unknown symbol sys_open
WARNING:
/lib/modules/2.6.4-mm1/kernel/drivers/media/dvb/frontends/sp887x.ko needs unknown symbol sys_lseek
WARNING:
/lib/modules/2.6.4-mm1/kernel/drivers/media/dvb/frontends/sp887x.ko needs unknown symbol sys_read
WARNING:
/lib/modules/2.6.4-mm1/kernel/drivers/media/dvb/frontends/sp887x.ko needs unknown symbol sys_open
WARNING:
/lib/modules/2.6.4-mm1/kernel/drivers/media/dvb/frontends/alps_tdlb7.ko needs unknown symbol sys_lseek
WARNING:
/lib/modules/2.6.4-mm1/kernel/drivers/media/dvb/frontends/alps_tdlb7.ko needs unknown symbol sys_read
WARNING:
/lib/modules/2.6.4-mm1/kernel/drivers/media/dvb/frontends/alps_tdlb7.ko needs unknown symbol sys_open

<-- snip -->

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#34 lore raw

Re: 2.6.4-mm1: unknown symbols cauased by remove-more-KERNEL_SYSCALLS.patch

Quoted 1 line · you

This causes the following unknown symbols in modules on i386:

Sorry, that could not work. This patch reverts my changes to loadable device drivers. As Arjan van de Ven already noted, they have to be converted to request_firmware() anyway.

	Arnd <><
 drivers/media/dvb/frontends/alps_tdlb7.c |   12 ++++++++----
 drivers/media/dvb/frontends/sp887x.c     |   11 +++++++----
 drivers/media/dvb/frontends/tda1004x.c   |   10 ++++++----
 sound/isa/wavefront/wavefront_synth.c    |   12 ++++++------
 sound/oss/wavfront.c                     |   12 +++++++-----
 5 files changed, 34 insertions(+), 23 deletions(-)
drivers/media/dvb/frontends/alps_tdlb7.c +8 -4
diff -u -r linux-2.6.4-mm1/drivers/media/dvb/frontends/alps_tdlb7.c linux-2.6.4-mm1-patched/drivers/media/dvb/frontends/alps_tdlb7.c
@@ -29,6 +29,8 @@
 */  
 
 
+
+#define __KERNEL_SYSCALLS__
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/vmalloc.h>
@@ -56,6 +58,8 @@
 #define SP8870_FIRMWARE_OFFSET 0x0A
 
 
+static int errno;
+
 static struct dvb_frontend_info tdlb7_info = {
 	.name			= "Alps TDLB7",
 	.type			= FE_OFDM,
@@ -170,13 +174,13 @@
 	loff_t filesize;
 	char *dp;
 
-	fd = sys_open(fn, 0, 0);
+	fd = open(fn, 0, 0);
 	if (fd == -1) {
                 printk("%s: unable to open '%s'.\n", __FUNCTION__, fn);
 		return -EIO;
 	}
 
-	filesize = sys_lseek(fd, 0L, 2);
+	filesize = lseek(fd, 0L, 2);
 	if (filesize <= 0 || filesize < SP8870_FIRMWARE_OFFSET + SP8870_FIRMWARE_SIZE) {
 	        printk("%s: firmware filesize to small '%s'\n", __FUNCTION__, fn);
 		sys_close(fd);
@@ -190,8 +194,8 @@
 		return -EIO;
 	}
 
-	sys_lseek(fd, SP8870_FIRMWARE_OFFSET, 0);
-	if (sys_read(fd, dp, SP8870_FIRMWARE_SIZE) != SP8870_FIRMWARE_SIZE) {
+	lseek(fd, SP8870_FIRMWARE_OFFSET, 0);
+	if (read(fd, dp, SP8870_FIRMWARE_SIZE) != SP8870_FIRMWARE_SIZE) {
 		printk("%s: failed to read '%s'.\n",__FUNCTION__, fn);
 		vfree(dp);
 		sys_close(fd);
drivers/media/dvb/frontends/sp887x.c +7 -4
diff -u -r linux-2.6.4-mm1/drivers/media/dvb/frontends/sp887x.c linux-2.6.4-mm1-patched/drivers/media/dvb/frontends/sp887x.c
@@ -12,6 +12,7 @@
    next 0x4000 loaded. This may change in future versions.
  */
 
+#define __KERNEL_SYSCALLS__
 #include <linux/kernel.h>
 #include <linux/vmalloc.h>
 #include <linux/module.h>
@@ -67,6 +68,8 @@
 		FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_RECOVER
 };
 
+static int errno;
+
 static
 int i2c_writebytes (struct dvb_frontend *fe, u8 addr, u8 *buf, u8 len)
 {
@@ -213,13 +216,13 @@
 
 	// Load the firmware
 	set_fs(get_ds());
-	fd = sys_open(sp887x_firmware, 0, 0);
+	fd = open(sp887x_firmware, 0, 0);
 	if (fd < 0) {
 		printk(KERN_WARNING "%s: Unable to open firmware %s\n", __FUNCTION__,
 		       sp887x_firmware);
 		return -EIO;
 	}
-	filesize = sys_lseek(fd, 0L, 2);
+	filesize = lseek(fd, 0L, 2);
 	if (filesize <= 0) {
 		printk(KERN_WARNING "%s: Firmware %s is empty\n", __FUNCTION__,
 		       sp887x_firmware);
@@ -241,8 +244,8 @@
 	// read it!
 	// read the first 16384 bytes from the file
 	// ignore the first 10 bytes
-	sys_lseek(fd, 10, 0);
-	if (sys_read(fd, firmware, fw_size) != fw_size) {
+	lseek(fd, 10, 0);
+	if (read(fd, firmware, fw_size) != fw_size) {
 		printk(KERN_WARNING "%s: Failed to read firmware\n", __FUNCTION__);
 		vfree(firmware);
 		sys_close(fd);
drivers/media/dvb/frontends/tda1004x.c +6 -4
diff -u -r linux-2.6.4-mm1/drivers/media/dvb/frontends/tda1004x.c linux-2.6.4-mm1-patched/drivers/media/dvb/frontends/tda1004x.c
@@ -32,6 +32,7 @@
  */
 
 
+#define __KERNEL_SYSCALLS__
 #include <linux/kernel.h>
 #include <linux/vmalloc.h>
 #include <linux/module.h>
@@ -40,6 +41,7 @@
 #include <linux/slab.h>
 #include <linux/syscalls.h>
 #include <linux/fs.h>
+#include <linux/unistd.h>
 #include <linux/fcntl.h>
 #include <linux/errno.h>
 #include "dvb_frontend.h"
@@ -397,13 +399,13 @@
 
 	// Load the firmware
 	set_fs(get_ds());
-	fd = sys_open(tda1004x_firmware, 0, 0);
+	fd = open(tda1004x_firmware, 0, 0);
 	if (fd < 0) {
 		printk("%s: Unable to open firmware %s\n", __FUNCTION__,
 		       tda1004x_firmware);
 		return -EIO;
 	}
-	filesize = sys_lseek(fd, 0L, 2);
+	filesize = lseek(fd, 0L, 2);
 	if (filesize <= 0) {
 		printk("%s: Firmware %s is empty\n", __FUNCTION__,
 		       tda1004x_firmware);
@@ -434,8 +436,8 @@
 	}
 
 	// read it!
-        sys_lseek(fd, fw_offset, 0);
-	if (sys_read(fd, firmware, fw_size) != fw_size) {
+        lseek(fd, fw_offset, 0);
+	if (read(fd, firmware, fw_size) != fw_size) {
 		printk("%s: Failed to read firmware\n", __FUNCTION__);
 		vfree(firmware);
 		sys_close(fd);
sound/isa/wavefront/wavefront_synth.c +6 -6
diff -u -r linux-2.6.4-mm1/sound/isa/wavefront/wavefront_synth.c linux-2.6.4-mm1-patched/sound/isa/wavefront/wavefront_synth.c
@@ -1913,11 +1913,11 @@
 	return (1);
 }
 
+#define __KERNEL_SYSCALLS__
 #include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/unistd.h>
-#include <linux/syscalls.h>
 #include <asm/uaccess.h>
 
 static int errno;
@@ -1947,7 +1947,7 @@
 	fs = get_fs();
 	set_fs (get_ds());
 
-	if ((fd = sys_open (path, 0, 0)) < 0) {
+	if ((fd = open (path, 0, 0)) < 0) {
 		snd_printk ("Unable to load \"%s\".\n",
 			path);
 		return 1;
@@ -1956,7 +1956,7 @@
 	while (1) {
 		int x;
 
-		if ((x = sys_read (fd, &section_length, sizeof (section_length))) !=
+		if ((x = read (fd, &section_length, sizeof (section_length))) !=
 		    sizeof (section_length)) {
 			snd_printk ("firmware read error.\n");
 			goto failure;
@@ -1966,7 +1966,7 @@
 			break;
 		}
 
-		if (sys_read (fd, section, section_length) != section_length) {
+		if (read (fd, section, section_length) != section_length) {
 			snd_printk ("firmware section "
 				"read error.\n");
 			goto failure;
@@ -2005,12 +2005,12 @@
 
 	}
 
-	sys_close (fd);
+	close (fd);
 	set_fs (fs);
 	return 0;
 
  failure:
-	sys_close (fd);
+	close (fd);
 	set_fs (fs);
 	snd_printk ("firmware download failed!!!\n");
 	return 1;
sound/oss/wavfront.c +7 -5
diff -u -r linux-2.6.4-mm1/sound/oss/wavfront.c linux-2.6.4-mm1-patched/sound/oss/wavfront.c
@@ -2490,9 +2490,11 @@
 }
 
 #include "os.h"
+#define __KERNEL_SYSCALLS__
 #include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
+#include <linux/unistd.h>
 #include <asm/uaccess.h>
 
 static int errno; 
@@ -2522,7 +2524,7 @@
 	fs = get_fs();
 	set_fs (get_ds());
 
-	if ((fd = sys_open (path, 0, 0)) < 0) {
+	if ((fd = open (path, 0, 0)) < 0) {
 		printk (KERN_WARNING LOGNAME "Unable to load \"%s\".\n",
 			path);
 		return 1;
@@ -2531,7 +2533,7 @@
 	while (1) {
 		int x;
 
-		if ((x = sys_read (fd, &section_length, sizeof (section_length))) !=
+		if ((x = read (fd, &section_length, sizeof (section_length))) !=
 		    sizeof (section_length)) {
 			printk (KERN_ERR LOGNAME "firmware read error.\n");
 			goto failure;
@@ -2541,7 +2543,7 @@
 			break;
 		}
 
-		if (sys_read (fd, section, section_length) != section_length) {
+		if (read (fd, section, section_length) != section_length) {
 			printk (KERN_ERR LOGNAME "firmware section "
 				"read error.\n");
 			goto failure;
@@ -2580,12 +2582,12 @@
 
 	}
 
-	sys_close (fd);
+	close (fd);
 	set_fs (fs);
 	return 0;
 
  failure:
-	sys_close (fd);
+	close (fd);
 	set_fs (fs);
 	printk (KERN_ERR "\nWaveFront: firmware download failed!!!\n");
 	return 1;
#35 lore raw

Re: 2.6.4-mm1: unknown symbols cauased by remove-more-KERNEL_SYSCALLS.patch

Quoted 7 lines · Arnd Bergmann
Quoted 1 line · you

This causes the following unknown symbols in modules on i386:

Sorry, that could not work. This patch reverts my changes to loadable device drivers. As Arjan van de Ven already noted, they have to be converted to request_firmware() anyway.

I just did an EXPORT_SYMBOL_GPL of the three symbols and added a suitably rude changelog. Is that inadequate?

#36 lore raw

Re: 2.6.4-mm1: unknown symbols cauased by remove-more-KERNEL_SYSCALLS.patch

Quoted 2 lines · you

I just did an EXPORT_SYMBOL_GPL of the three symbols and added a suitably rude changelog.  Is that inadequate?

The symbols are already exported on alpha, arm, parisc, um and x86_64, but I'd rather not have them available to modules at all in order to prevent driver writers from (ab)using them after KERNEL_SYSCALLS have been eliminated.

	Arnd <><
#37 lore raw

Re: 2.6.4-mm1: unknown symbols cauased by remove-more-KERNEL_SYSCALLS.patch

Quoted 10 lines · Arnd Bergmann
Quoted 2 lines · you

I just did an EXPORT_SYMBOL_GPL of the three symbols and added a suitably rude changelog.  Is that inadequate?

The symbols are already exported on alpha, arm, parisc, um and x86_64, but I'd rather not have them available to modules at all in order to prevent driver writers from (ab)using them after KERNEL_SYSCALLS have been eliminated.

But then the removal of KERNEL_SYSCALLS becomes hostage to those drivers,
and nobody is working on them. It'll never happen.

#38 lore raw

Re: 2.6.4-mm1: unknown symbols cauased by remove-more-KERNEL_SYSCALLS.patch

Quoted 7 lines · Andrew Morton
Quoted 4 lines

The symbols are already exported on alpha, arm, parisc, um and x86_64, but I'd rather not have them available to modules at all in order to prevent driver writers from (ab)using them after KERNEL_SYSCALLS have been eliminated.

But then the removal of KERNEL_SYSCALLS becomes hostage to those drivers,
and nobody is working on them. It'll never happen.

The DVB folks claimed to be working on fixing this up a few weeks back, still not seen any patches though.

Dave

#39 lore raw

Re: 2.6.4-mm1: unknown symbols cauased by remove-more-KERNEL_SYSCALLS.patch

Dave Jones <[email protected]> :
[...]

Quoted 2 lines

The DVB folks claimed to be working on fixing this up a few weeks back, still not seen any patches though.

Which drivers can be considered to be good examples for the firmware framework ?

--
Ueimor

#40 lore raw

Re: 2.6.4-mm1: unknown symbols cauased by remove-more-KERNEL_SYSCALLS.patch

In reply to Andrew Morton
Quoted 4 lines · Andrew Morton

Arnd Bergmann <[email protected]> wrote:

But then the removal of KERNEL_SYSCALLS becomes hostage to those drivers,
and nobody is working on them. It'll never happen.

CONFIG_BROKEN ??

#41 lore raw

Re: 2.6.4-mm1: unknown symbols cauased byremove-more-KERNEL_SYSCALLS.patch

Quoted 7 lines · Arjan van de Ven
Quoted 4 lines · Andrew Morton

Arnd Bergmann <[email protected]> wrote:

But then the removal of KERNEL_SYSCALLS becomes hostage to those drivers,
and nobody is working on them. It'll never happen.

CONFIG_BROKEN ??

These are working drivers, and it's a stable kernel series...

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#42 lore raw

Re: 2.6.4-mm1: unknown symbols cauased byremove-more-KERNEL_SYSCALLS.patch

Quoted 10 lines · Adrian Bunk
Quoted 7 lines · Arjan van de Ven
Quoted 4 lines · Andrew Morton

Arnd Bergmann <[email protected]> wrote:

But then the removal of KERNEL_SYSCALLS becomes hostage to those drivers,
and nobody is working on them. It'll never happen.

CONFIG_BROKEN ??

These are working drivers, and it's a stable kernel series...

for some value of working...
I mean, I'm not convinced the code is actually secure
(what if the fd they use is shared via a thread and userland is mucking about with that fd to do funky stuff ???)

#43 lore raw
In reply to Andrew Morton

2.6.4-mm1 doesn't work for me :-(

I get the:
Uncompressing kernel ... now booting Linux

message, and then ...... nothing.

I've seen this before when trying to boot a P4 kernel on a P-classic etc, so I tried compiling with CONFIG_M386, and got lots of compile errors:

include/asm/acpi.h: In function `__acpi_acquire_global_lock':
include/asm/acpi.h:74: warning: implicit declaration of function `cmpxchg'

So I tried the default (CONFIG_M686) and it still doesn't work.

So: where do I look next?

I've included some of the machine specs below together with a config file.

Thanks.

(I did include the mpage.c fix)

NeilBrown

When 2.4.23 is booted, /proc/cpuinfo contains:

 # cat /proc/cpuinfo 
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Xeon(TM) CPU 2.80GHz
stepping        : 7
cpu MHz         : 2791.078
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips        : 5570.56

... and so on with 4 processors identical except for the number. (It is a dual-Xeon machine).

lspci shows:

00:00.0 Host bridge: ServerWorks CMIC-LE (rev 13)
00:00.1 Host bridge: ServerWorks CMIC-LE
00:00.2 Host bridge: ServerWorks: Unknown device 0000
00:04.0 Class ff00: Dell Computer Corporation Embedded Systems Management Device 4 00:04.1 Class ff00: Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di 00:04.2 Class ff00: Dell Computer Corporation: Unknown device 000d
00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 00:0f.0 Host bridge: ServerWorks CSB5 South Bridge (rev 93)
00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93)
00:0f.3 ISA bridge: ServerWorks GCLE Host Bridge
00:10.0 Host bridge: ServerWorks: Unknown device 0101 (rev 05)
00:10.2 Host bridge: ServerWorks: Unknown device 0101 (rev 05)
00:11.0 Host bridge: ServerWorks: Unknown device 0101 (rev 05)
00:11.2 Host bridge: ServerWorks: Unknown device 0101 (rev 05)
01:08.0 Ethernet controller: Intel Corp. 82544EI Gigabit Ethernet Controller (Copper) (rev 02) 02:06.0 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01) 02:06.1 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01) 03:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15) 03:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15) 04:08.0 PCI bridge: Intel Corp.: Unknown device 0309 (rev 01)
05:06.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
05:06.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)

Early dmesg messages when booted 2.4.23 are:

Mar 12 11:18:22 adams kernel: Linux version 2.4.23-server3 (root@adams) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Wed Jan 7 13:03:33 EST 2004
Mar 12 11:18:22 adams kernel: BIOS-provided physical RAM map:
Mar 12 11:18:22 adams kernel:  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Mar 12 11:18:22 adams kernel:  BIOS-e820: 0000000000100000 - 00000000f7ff0000 (usable)
Mar 12 11:18:22 adams kernel:  BIOS-e820: 00000000f7ff0000 - 00000000f7ffec00 (ACPI data)
Mar 12 11:18:22 adams kernel:  BIOS-e820: 00000000f7ffec00 - 00000000f7fff000 (reserved)
Mar 12 11:18:22 adams kernel:  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Mar 12 11:18:22 adams kernel:  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
Mar 12 11:18:22 adams kernel:  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Mar 12 11:18:22 adams kernel: 3071MB HIGHMEM available.
Mar 12 11:18:22 adams kernel: 896MB LOWMEM available.
Mar 12 11:18:22 adams kernel: found SMP MP-table at 000fe710
Mar 12 11:18:22 adams kernel: hm, page 000fe000 reserved twice.
Mar 12 11:18:22 adams kernel: hm, page 000ff000 reserved twice.
Mar 12 11:18:22 adams kernel: hm, page 000f0000 reserved twice.
Mar 12 11:18:22 adams kernel: On node 0 totalpages: 1015792
Mar 12 11:18:22 adams kernel: zone(0): 4096 pages.
Mar 12 11:18:22 adams kernel: zone(1): 225280 pages.
Mar 12 11:18:22 adams kernel: zone(2): 786416 pages.
Mar 12 11:18:22 adams kernel: ACPI: RSDP (v000 DELL                                      ) @ 0x000fdc60
Mar 12 11:18:22 adams kernel: ACPI: RSDT (v001 DELL   PE2650   0x00000001 MSFT 0x0100000a) @ 0x000fdc74
Mar 12 11:18:22 adams kernel: ACPI: FADT (v001 DELL   PE2650   0x00000001 MSFT 0x0100000a) @ 0x000fdca4
Mar 12 11:18:22 adams kernel: ACPI: MADT (v001 DELL   PE2650   0x00000001 MSFT 0x0100000a) @ 0x000fdd18
Mar 12 11:18:22 adams kernel: ACPI: SPCR (v001 DELL   PE2650   0x00000001 MSFT 0x0100000a) @ 0x000fdda0
Mar 12 11:18:22 adams kernel: ACPI: DSDT (v001 DELL   PE2650   0x00000001 MSFT 0x0100000a) @ 0x00000000
Mar 12 11:18:22 adams kernel: ACPI: Local APIC address 0xfee00000
Mar 12 11:18:22 adams kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Mar 12 11:18:22 adams kernel: Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
Mar 12 11:18:22 adams kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Mar 12 11:18:22 adams kernel: Processor #2 Pentium 4(tm) XEON(tm) APIC version 20
Mar 12 11:18:22 adams kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Mar 12 11:18:22 adams kernel: Processor #1 Pentium 4(tm) XEON(tm) APIC version 20
Mar 12 11:18:22 adams kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Mar 12 11:18:22 adams kernel: Processor #3 Pentium 4(tm) XEON(tm) APIC version 20
Mar 12 11:18:22 adams kernel: ACPI: LAPIC_NMI (acpi_id[0x01] polarity[0x1] trigger[0x1] lint[0x1])
Mar 12 11:18:22 adams kernel: ACPI: LAPIC_NMI (acpi_id[0x02] polarity[0x1] trigger[0x1] lint[0x1])
Mar 12 11:18:22 adams kernel: ACPI: LAPIC_NMI (acpi_id[0x03] polarity[0x1] trigger[0x1] lint[0x1])
Mar 12 11:18:22 adams kernel: ACPI: LAPIC_NMI (acpi_id[0x04] polarity[0x1] trigger[0x1] lint[0x1])
Mar 12 11:18:22 adams kernel: Using ACPI for processor (LAPIC) configuration information
Mar 12 11:18:22 adams kernel: Intel MultiProcessor Specification v1.4
Mar 12 11:18:22 adams kernel:     Virtual Wire compatibility mode.
Mar 12 11:18:22 adams kernel: OEM ID: DELL     Product ID: PE 0121      APIC at: 0xFEE00000
Mar 12 11:18:22 adams kernel: I/O APIC #4 Version 17 at 0xFEC00000.
Mar 12 11:18:22 adams kernel: I/O APIC #5 Version 17 at 0xFEC01000.
Mar 12 11:18:22 adams kernel: I/O APIC #6 Version 17 at 0xFEC02000.
Mar 12 11:18:22 adams kernel: Enabling APIC mode: Flat.^IUsing 3 I/O APICs
Mar 12 11:18:22 adams kernel: Processors: 4
Mar 12 11:18:22 adams kernel: Kernel command line: auto BOOT_IMAGE=Linux ro root=801
Mar 12 11:18:22 adams kernel: Initializing CPU#0
Mar 12 11:18:22 adams kernel: Detected 2790.984 MHz processor.
Mar 12 11:18:22 adams kernel: Console: colour VGA+ 80x25

.config is:
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
# CONFIG_STANDALONE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_X86_4G is not set
# CONFIG_X86_SWITCH_PAGETABLES is not set
# CONFIG_X86_4G_VM_LAYOUT is not set
# CONFIG_X86_UACCESS_INDIRECT is not set
# CONFIG_X86_HIGH_ENTRY is not set
# CONFIG_HPET_TIMER is not set
# CONFIG_HPET_EMULATE_RTC is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
CONFIG_PM_DISK=y
CONFIG_PM_DISK_PARTITION=""

#
# ACPI (Advanced Configuration and Power Interface) Support #
# CONFIG_ACPI is not set
CONFIG_ACPI_BOOT=y

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_USE_VECTOR is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
# CONFIG_YENTA is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_UMEM=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_TASKFILE_IO=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
CONFIG_BLK_DEV_SVWKS=y
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_REPORT_LUNS is not set CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
CONFIG_MD_RAID6=y
CONFIG_MD_MULTIPATH=y
# CONFIG_BLK_DEV_DM is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETFILTER is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_LANCE=y
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_E100_NAPI is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=y
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
# CONFIG_SERIO_PCIPS2 is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
CONFIG_AGP_ALI=y
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
CONFIG_DRM_TDFX=y
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=y

#
# I2C support
#
# CONFIG_I2C is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
# CONFIG_FB is not set
CONFIG_VIDEO_SELECT=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
# CONFIG_USB is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
CONFIG_QFMT_V1=y
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
# CONFIG_FAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
# CONFIG_NLS is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_SLAB=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_SPINLINE is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_LOCKMETER is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_KGDB is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
CONFIG_CRC32=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y

#44 lore raw
Quoted 16 lines · Neil Brown

2.6.4-mm1 doesn't work for me :-(

I get the:
Uncompressing kernel ... now booting Linux

message, and then ...... nothing.

I've seen this before when trying to boot a P4 kernel on a P-classic etc, so I tried compiling with CONFIG_M386, and got lots of compile errors:

include/asm/acpi.h: In function `__acpi_acquire_global_lock':
include/asm/acpi.h:74: warning: implicit declaration of function `cmpxchg'

Quoted 6 lines

So I tried the default (CONFIG_M686) and it still doesn't work.

So: where do I look next?

I've included some of the machine specs below together with a config file.

Tried adding earlyprintk=vga?

If that works, judicious addition of printks will narrow it down.

#45 lore raw
Quoted 4 lines · On Thursday March 11, [email protected] wrote:

Tried adding earlyprintk=vga?

If that works, judicious addition of printks will narrow it down.

It doesn't.

I've tried compiling with SMP - no go.
I've tried with gcc-2.95 (instead of 3.3.2). Still no go.

I thought I might try selectively removing patches, but it isn't clear what order the borken-out patches were applied it.
If you have an ordered list, I can try a binary search.
Or if you can suggest some patches that I can try backing out....

NeilBrown

#46 lore raw
Quoted 11 lines · Neil Brown
Quoted 4 lines · On Thursday March 11, [email protected] wrote:

Tried adding earlyprintk=vga?

If that works, judicious addition of printks will narrow it down.

It doesn't.

I've tried compiling with SMP - no go.
I've tried with gcc-2.95 (instead of 3.3.2). Still no go.

Your .config works happily here.

Quoted 3 lines

I thought I might try selectively removing patches, but it isn't clear what order the borken-out patches were applied it.
If you have an ordered list, I can try a binary search.

See the `series' file in the broken-out directory.

Quoted 1 line

Or if you can suggest some patches that I can try backing out....

Maybe turn off -mregparm? Or back off the 4g/4g patches? Maybe they broke non-4:4 code comehow.

#47 lore raw
Quoted 6 lines · On Thursday March 11, [email protected] wrote:
Quoted 3 lines

I thought I might try selectively removing patches, but it isn't clear what order the borken-out patches were applied it.
If you have an ordered list, I can try a binary search.

See the `series' file in the broken-out directory.

Ahh... would you consider moving that up one level, or spelling it "Series" or "00series" or something to make it stand out for the uninitiated??

Quoted 5 lines
Quoted 1 line

Or if you can suggest some patches that I can try backing out....

Maybe turn off -mregparm? Or back off the 4g/4g patches? Maybe they broke non-4:4 code comehow.

Looks like it might be a good guess....

I cannot reach the reset button on the weekend, so I wrote a little boot-time script which would apply the next patch, mail me, recompile, install, and reboot.

It got up to stop-using-dirty-pages.patch and died because of the spin_unlock in mm/page.c - I left SPINLOCK_DEBUG configured :-(

But that only leaves

   235  stop-using-io-pages.patch
   236  stop-using-locked-pages.patch
   237  stop-using-clean-pages.patch
   238  unslabify-pgds-and-pmds.patch
   239  slab-stop-using-page-list.patch
   240  page_alloc-stop-using-page-list.patch
   241  hugetlb-stop-using-page-list.patch
   242  pageattr-stop-using-page-list.patch
   243  readahead-stop-using-page-list.patch
   244  compound-pages-stop-using-lru.patch
   245  remove-page-list.patch
   246  remap-file-pages-prot-2.6.4-rc1-mm1-A1.patch
   247  remap-file-pages-prot-ia64-2.6.4-rc2-mm1-A0.patch
   248  list_del-debug.patch
   249  oops-dump-preceding-code.patch
   250  lockmeter.patch
   251  lockmeter-ia64-fix.patch
   252  4g-2.6.0-test2-mm2-A5.patch
   253  4g4g-locked-userspace-copy.patch
   254  ia32-4k-stacks.patch
   255  ia32-4k-stacks-build-fix.patch
   256  4k-stacks-in-modversions-magic.patch
   257  ppc-fixes.patch
   258  ppc-fixes-dependency-fix.patch

of which, the 4g and the 4k-stack patches look most likely. I'll finish the hunt when I get back to the office.

Thanks,
NeilBrown

#48 lore raw

Re: 2.6.4-mm1 - 4g patch breaks when X86_4G not selected

Quoted 12 lines · On Saturday March 13, [email protected] wrote:
Quoted 6 lines · On Thursday March 11, [email protected] wrote:
Quoted 3 lines

I thought I might try selectively removing patches, but it isn't clear what order the borken-out patches were applied it.
If you have an ordered list, I can try a binary search.

See the `series' file in the broken-out directory.

Ahh... would you consider moving that up one level, or spelling it "Series" or "00series" or something to make it stand out for the uninitiated??

Quoted 8 lines
Quoted 5 lines
Quoted 1 line

Or if you can suggest some patches that I can try backing out....

Maybe turn off -mregparm? Or back off the 4g/4g patches? Maybe they broke non-4:4 code comehow.

Looks like it might be a good guess....

And it turns out it was spot on.
Applying 4g-2.6.0-test2-mm2-A5.patch (on top of preceding -mm1 patches) causes my server not to boot.

I tried all the broken out patches except

     4g-2.6.0-test2-mm2-A5.patch
     4g4g-locked-userspace-copy.patch

but then it couldn't find /sbin/init, even though the root filesystem was successful found (I don't know if that is significant).

With all of mm1 applied, and with X86_4G selected, it boots fine. But without X86_4G it doesn't get to print out any messages at all, even with 'earlyprintk=vga' set.

I am happy to experiment with if you or anyone has patches you would like tested.

NeilBrown

#49 lore raw

Re: 2.6.4-mm1 - 4g patch breaks when X86_4G not selected

Quoted 2 lines · Neil Brown

And it turns out it was spot on. Applying 4g-2.6.0-test2-mm2-A5.patch (on top of preceding -mm1 patches) causes my server not to boot.

weird. 2.6.4-mm2 boots fine here (both 4g and non-4g). Could you send me your .config?

(btw., 2.6.4-mm2 needs the attached trivial fix to compile.)

Ingo

Makefile renamed from Makefile.orig +1 -1
@@ -988,7 +988,7 @@ if_changed_dep = $(if $(strip $? $(filte
 	@set -e; \
 	$(if $($(quiet)cmd_$(1)),echo '  $(subst ','\'',$($(quiet)cmd_$(1)))';) \
 	$(cmd_$(1)); \
-	scripts/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
+	scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
 	rm -f $(depfile); \
 	mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)
 
#50 lore raw

Re: 2.6.4-mm1 - 4g patch breaks when X86_4G not selected

Quoted 10 lines · Ingo Molnar
Quoted 2 lines · Neil Brown

And it turns out it was spot on. Applying 4g-2.6.0-test2-mm2-A5.patch (on top of preceding -mm1 patches) causes my server not to boot.

weird. 2.6.4-mm2 boots fine here (both 4g and non-4g). Could you send me your .config?

(btw., 2.6.4-mm2 needs the attached trivial fix to compile.)

Yes actually it is scrogged, but i'm sceptical as to whether it is 4G/4G, here is a broken configuration.

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_STANDALONE=y
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
CONFIG_M586TSC=y
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_F00F_BUG=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_4G=y
CONFIG_X86_SWITCH_PAGETABLES=y
CONFIG_X86_4G_VM_LAYOUT=y
CONFIG_X86_UACCESS_INDIRECT=y
CONFIG_X86_HIGH_ENTRY=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_SMP=y
CONFIG_NR_CPUS=3
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_EDD=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_PM_DISK is not set

#
# ACPI (Advanced Configuration and Power Interface) Support #
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_SLEEP is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_USE_VECTOR is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not set
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
CONFIG_YENTA=y
CONFIG_CARDBUS=y
CONFIG_I82092=y
CONFIG_I82365=y
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_PC_PCMCIA is not set
CONFIG_PARPORT_OTHER=y
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y

#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_TASKFILE_IO=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_OPTI621=y
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_MAX_SD_DISKS=256
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_PROBE_EISA_VL is not set
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_OMIT_FLASHPOINT=y
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_IOMAPPED=y
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_DM is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=y

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set

#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=y

#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
CONFIG_IEEE1394_SBP2=y
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=y
# CONFIG_IEEE1394_CMP is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Macintosh device drivers
#

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
CONFIG_EL3=m
# CONFIG_3C515 is not set
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_PCMCIA_XIRTULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_E100_NAPI is not set
# CONFIG_LNE390 is not set
CONFIG_FEALNX=y
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_8139_RXBUF_IDX=2
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
# CONFIG_PCMCIA_NMCLAN is not set
CONFIG_PCMCIA_SMC91C92=y
CONFIG_PCMCIA_XIRC2PS=y
CONFIG_PCMCIA_AXNET=m

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_UINPUT=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_DIGI is not set
# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_MULTIPORT=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
CONFIG_AMD7XX_TCO=y
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I8XX_TCO is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_SCx200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_MACHZ_WDT is not set

#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set

#
# I2C support
#
CONFIG_I2C=m
# CONFIG_I2C_CHARDEV is not set

#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_ELV is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_ISA is not set
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_PHILIPSPAR is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VELLEMAN is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set

#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Misc devices
#
CONFIG_IBM_ASM=y

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_OSSEMUL is not set
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
CONFIG_SND_CS4232=m
CONFIG_SND_CS4236=m
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
CONFIG_SND_OPL3SA2=m
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_ICE1712=y
CONFIG_SND_ICE1724=y
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set

#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_VIA82CXXX=y
CONFIG_MIDI_VIA82CXXX=y
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_TVMIXER is not set
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_FORTE is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_AD1980 is not set

#
# USB support
#
CONFIG_USB=y
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_STORAGE is not set

#
# USB Human Interface Devices (HID)
#
# CONFIG_USB_HID is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
CONFIG_USB_OV511=m
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_W9968CF is not set

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_DEBUG=y
# CONFIG_USB_SERIAL_CONSOLE is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=y
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
CONFIG_USB_TIGL=m
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_TEST is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_RT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
CONFIG_MINIX_FS=y
CONFIG_ROMFS_FS=m
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EFS_FS=y
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=y
CONFIG_QNX4FS_RW=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
# CONFIG_ROOT_NFS is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
CONFIG_SMB_FS=y
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_SLAB=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_SPINLINE is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_INFO=y
# CONFIG_LOCKMETER is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_KGDB is not set
CONFIG_FRAME_POINTER=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_SELINUX is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_TEST is not set

#
# Library routines
#
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y

#51 lore raw

Re: 2.6.4-mm1 - 4g patch breaks when X86_4G not selected

Quoted 9 lines · Zwane Mwaikambo
Quoted 6 lines · Ingo Molnar
Quoted 2 lines · Neil Brown

And it turns out it was spot on. Applying 4g-2.6.0-test2-mm2-A5.patch (on top of preceding -mm1 patches) causes my server not to boot.

Quoted 7 lines
Quoted 4 lines

weird. 2.6.4-mm2 boots fine here (both 4g and non-4g). Could you send me your .config?

(btw., 2.6.4-mm2 needs the attached trivial fix to compile.)

Yes actually it is scrogged, but i'm sceptical as to whether it is 4G/4G, here is a broken configuration.

Manfred found and fixed one bug, but that was newly added in mm2.

DEBUG_PAGEALLOC switches to nopentium mode: otherwise a change_page_attr could cause a split of a 4 MB page, which could cause a gfp which might deadlock.

Two parts of the cpu initialization cannot be done early: the f00f bug workaround needs a working paging setup, and loops_per_jiffies is only initialized after the timer is running. And everything in setup_arch instead of before start_kernel: The first printk line should be the "Linux verion xy" line from start_kernel.

---

 25-akpm/arch/i386/kernel/cpu/common.c |   40 ++++++++++++++++++++++------------
 25-akpm/arch/i386/kernel/setup.c      |    3 --
 25-akpm/include/asm-i386/processor.h  |    2 -
 3 files changed, 29 insertions(+), 16 deletions(-)
arch/i386/kernel/cpu/common.c renamed from arch/i386/kernel/cpu/common.c~early-x86-cpu-detection-fix +27 -13
diff -puN arch/i386/kernel/cpu/common.c~early-x86-cpu-detection-fix arch/i386/kernel/cpu/common.c
@@ -234,7 +234,7 @@ void __init generic_identify(struct cpui
 		if ( (xlvl & 0xffff0000) == 0x80000000 ) {
 			if ( xlvl >= 0x80000001 )
 				c->x86_capability[1] = cpuid_edx(0x80000001);
-			if ( xlvl >= 0x80000004)
+			if ( xlvl >= 0x80000004 )
 				get_model_name(c); /* Default name */
 		}
 	}
@@ -263,18 +263,22 @@ static int __init x86_serial_nr_setup(ch
 }
 __setup("serialnumber", x86_serial_nr_setup);
 
-void __init early_identify_cpu(struct cpuinfo_x86 *c)
+/*
+ * This does the hard work of actually picking apart the CPU stuff...
+ */
+void __init identify_cpu(struct cpuinfo_x86 *c)
 {
-	c->loops_per_jiffy = loops_per_jiffy;
+	int i;
+
 	c->x86_cache_size = -1;
 	c->x86_vendor = X86_VENDOR_UNKNOWN;
 	c->cpuid_level = -1;	/* CPUID not detected */
 	c->x86_model = c->x86_mask = 0;	/* So far unknown... */
 	c->x86_vendor_id[0] = '\0'; /* Unset */
 	c->x86_model_id[0] = '\0';  /* Unset */
-	c->x86_clflush_size = 32;
 	memset(&c->x86_capability, 0, sizeof c->x86_capability);
 
+	c->x86_clflush_size = 0;
 	if (!have_cpuid_p()) {
 		/* First of all, decide if this is a 486 or higher */
 		/* It's a 486 if we can modify the AC flag */
@@ -285,16 +289,14 @@ void __init early_identify_cpu(struct cp
 	}
 
 	generic_identify(c);
-}
-
-/*
- * This does the hard work of actually picking apart the CPU stuff...
- */
-void __init identify_cpu(struct cpuinfo_x86 *c)
-{
-	int i;
 
-	early_identify_cpu(c);
+	if (!c->x86_clflush_size) {
+		/* No cache line size autodetected - manual estimate: */
+		if (c->x86 <= 4)
+			c->x86_clflush_size = 16;
+		else
+			c->x86_clflush_size = 32;
+	}
 
 	printk(KERN_DEBUG "CPU:     After generic identify, caps: %08lx %08lx %08lx %08lx\n",
 		c->x86_capability[0],
@@ -382,7 +384,19 @@ void __init identify_cpu(struct cpuinfo_
 #ifdef CONFIG_X86_MCE
 	mcheck_init(c);
 #endif
+	late_identify_cpu(c);
+}
+
+void __init late_identify_cpu(struct cpuinfo_x86 *c)
+{
+	/*
+	 * The timer is not yet running when identify cpu is called for the
+	 * first cpu - check_bugs() calls late_identify_cpu and transfers
+	 * loops_per_jiffy from calibrate_delay into the cpu data area.
+	 */
+	c->loops_per_jiffy = loops_per_jiffy;
 }
+
 /*
  *	Perform early boot up checks for a valid TSC. See arch/i386/kernel/time.c
  */
arch/i386/kernel/setup.c renamed from arch/i386/kernel/setup.c~early-x86-cpu-detection-fix +1 -2
diff -puN arch/i386/kernel/setup.c~early-x86-cpu-detection-fix arch/i386/kernel/setup.c
@@ -1124,6 +1124,7 @@ void __init setup_arch(char **cmdline_p)
 
 	max_low_pfn = setup_memory();
 
+	identify_cpu(&boot_cpu_data);
 	/*
 	 * NOTE: before this point _nobody_ is allowed to allocate
 	 * any memory using the bootmem allocator.
@@ -1149,8 +1150,6 @@ void __init setup_arch(char **cmdline_p)
 
 	dmi_scan_machine();
 
-	early_identify_cpu(&boot_cpu_data);
-
 #ifdef CONFIG_X86_GENERICARCH
 	generic_apic_probe(*cmdline_p);
 #endif	
include/asm-i386/processor.h renamed from include/asm-i386/processor.h~early-x86-cpu-detection-fix +1 -1
diff -puN include/asm-i386/processor.h~early-x86-cpu-detection-fix include/asm-i386/processor.h
@@ -98,6 +98,7 @@ extern struct cpuinfo_x86 cpu_data[];
 extern char ignore_fpu_irq;
 
 extern void identify_cpu(struct cpuinfo_x86 *);
+extern void late_identify_cpu(struct cpuinfo_x86 *c);
 extern void print_cpu_info(struct cpuinfo_x86 *);
 extern void dodgy_tsc(void);
 
@@ -653,6 +654,5 @@ extern void select_idle_routine(const st
 #endif
 
 #define cache_line_size() (boot_cpu_data.x86_clflush_size)
-extern void early_identify_cpu(struct cpuinfo_x86 *c);
 
 #endif /* __ASM_I386_PROCESSOR_H */

_

#52 lore raw

Re: 2.6.4-mm1 - 4g patch breaks when X86_4G not selected

In reply to Neil Brown
Quoted 2 lines · Neil Brown

And it turns out it was spot on. Applying 4g-2.6.0-test2-mm2-A5.patch (on top of preceding -mm1 patches) causes my server not to boot.

hm. Since your .config boots on akpm's box, this is some BIOS dependency creating an early-boot problem i fear. Debugging such bugs is hard. One way would be via the PC speaker:

	movb $0x3,%al; outb %al,$0x61

this will cause a continuous beep on a typical PC - it works in 16-bit code too, doesnt have any memory-model assumptions, etc.

the first place to put this would be startup_32 - do we get to this point at all? (check CONFIG_4G first, to make sure the beep triggers.) If it beeps, then move it down until you find the place that crashes.

Ingo

#53 lore raw

Re: 2.6.4-mm1 - 4g patch breaks when X86_4G not selected

Quoted 12 lines · On Monday March 15, [email protected] wrote:
Quoted 2 lines · Neil Brown

And it turns out it was spot on. Applying 4g-2.6.0-test2-mm2-A5.patch (on top of preceding -mm1 patches) causes my server not to boot.

hm. Since your .config boots on akpm's box, this is some BIOS dependency creating an early-boot problem i fear. Debugging such bugs is hard. One way would be via the PC speaker:

	movb $0x3,%al; outb %al,$0x61
Quoted 8 lines

this will cause a continuous beep on a typical PC - it works in 16-bit code too, doesnt have any memory-model assumptions, etc.

the first place to put this would be startup_32 - do we get to this point at all? (check CONFIG_4G first, to make sure the beep triggers.) If it beeps, then move it down until you find the place that crashes.

Ingo

Thanks for the pointer. I now have something useful to report.

start_kernel calls setup_arch
which calls paging_init
which calls pagetable_init
which calls setup_identity_mappings
which calls page_address

If I put

        asm("push %eax; movb $0x3,%al; outb %al,$0x61; popl %eax\n");
before the call to page_address, and
        asm("push %eax; movb $0x0,%al; outb %al,$0x61; popl %eax\n");

afterwards, then I get a tone after boot, suggesting that page_address isn't returning.

I'm guessing that the problem is:

page_address calls

	spin_lock_irqsave(&pas->lock, flags);

but the spinlock isn't initialised by page_address_init until much later in start_kernel.

NeilBrown

#54 lore raw

Re: 2.6.4-mm1 - 4g patch breaks when X86_4G not selected

Quoted 16 lines · Neil Brown

Thanks for the pointer. I now have something useful to report.

start_kernel calls setup_arch
which calls paging_init
which calls pagetable_init
which calls setup_identity_mappings
which calls page_address

If I put

         asm("push %eax; movb $0x3,%al; outb %al,$0x61; popl %eax\n");
 before the call to page_address, and
         asm("push %eax; movb $0x0,%al; outb %al,$0x61; popl %eax\n");

afterwards, then I get a tone after boot, suggesting that page_address isn't returning.

Quoted 7 lines

I'm guessing that the problem is:

page_address calls
spin_lock_irqsave(&pas->lock, flags);

but the spinlock isn't initialised by page_address_init until much later in start_kernel.

That is useful, thanks. Sorry about the hassle.

Calling page_address_init() earlier isn't the fix though - pmd pages aren't in highmem so we should never have got that far. Looks like the pgd or the pmd page contains garbage. Did you try it without CONFIG_DEBUG_SLAB?

Nick was seeing slab 0x6b patterns on the NUMAQ, inside the pmd, so there's some consistency there. We do have one early setup fix from Manfred, but it's unlikely to cure this.

I'll have a play with your .config, see if I can reproduce it. If not I'll squeeze off -mm3 and would ask you to retest on that if poss.

#55 lore raw

Re: 2.6.4-mm1 - 4g patch breaks when X86_4G not selected

Quoted 7 lines · On Monday March 15, [email protected] wrote:

That is useful, thanks. Sorry about the hassle.

Calling page_address_init() earlier isn't the fix though - pmd pages aren't in highmem so we should never have got that far. Looks like the pgd or the pmd page contains garbage. Did you try it without CONFIG_DEBUG_SLAB?

Without CONFIG_DEBUG_SLAB, it boots OK.

Quoted 7 lines

Nick was seeing slab 0x6b patterns on the NUMAQ, inside the pmd, so there's some consistency there. We do have one early setup fix from Manfred, but it's unlikely to cure this.

I'll have a play with your .config, see if I can reproduce it. If not I'll squeeze off -mm3 and would ask you to retest on that if poss.

When it comes, I'll test it.

thanks,
NeilBrown

#56 lore raw

Re: 2.6.4-mm1 - 4g patch breaks when X86_4G not selected

In reply to Andrew Morton
Quoted 2 lines · Andrew Morton

I'll have a play with your .config, see if I can reproduce it. If not I'll squeeze off -mm3 and would ask you to retest on that if poss.

i tried Neil's bzImage and it hung on a stock PC too.

Ingo

#57 lore raw

Re: 2.6.4-mm1 - 4g patch breaks when X86_4G not selected

Quoted 8 lines · Ingo Molnar
Quoted 2 lines · Andrew Morton

I'll have a play with your .config, see if I can reproduce it. If not I'll squeeze off -mm3 and would ask you to retest on that if poss.

i tried Neil's bzImage and it hung on a stock PC too.

Me too, with CONFIG_DEBUG_PAGEALLOC. We had a fatal bug around that.

However it seems that Neil's machine is dying with CONFIG_DEBUG_SLAB=y, CONFIG_DEBUG_PAGEALLOC=n, for which we have no explanation. It seems that we're getting use-after-free errors against the pgd's.

Maybe it was the early-x86-cpu-detection.patch bug biting in two places - let me brew rc1-mm1 and we'll see.

#58 lore raw

Re: 2.6.4-mm1 - 4g patch breaks when X86_4G not selected

In reply to Andrew Morton

another thing: the bzImage is pretty large (1.7MB) - maybe 4G just pushes the size of the kernel past some size limit. Same for SLAB_DEBUG.

Ingo

#59 lore raw

PATCH 1/1 setup_identity_mappings depends on zone init.

In reply to Andrew Morton
Quoted 10 lines · Andrew Morton

Calling page_address_init() earlier isn't the fix though - pmd pages aren't in highmem so we should never have got that far. Looks like the pgd or the pmd page contains garbage. Did you try it without CONFIG_DEBUG_SLAB?

Nick was seeing slab 0x6b patterns on the NUMAQ, inside the pmd, so there's some consistency there. We do have one early setup fix from Manfred, but it's unlikely to cure this.

I'll have a play with your .config, see if I can reproduce it. If not I'll squeeze off -mm3 and would ask you to retest on that if poss.

I spent a bit of time on this today, and the problem appears to be that we haven't done mem_map or zone initialisation, so mem_map[pfn]->flags is also wrong (e.g. PG_highmem tests). This is still triple faulting on 2.6.5-rc3-mm4 on my boxes. CONFIG_HIGHMEM and any setup without 4MB pages should do it. The following patch got an approving nod from Bill.

Index: linux-2.6.5-rc3-mm4/arch/i386/mm/init.c
===================================================================
RCS file: /home/cvsroot/linux-2.6.5-rc3-mm4/arch/i386/mm/init.c,v retrieving revision 1.1.1.1

arch/i386/mm/init.c +1 -1
diff -u -p -B -r1.1.1.1 init.c
@@ -206,7 +206,7 @@ void setup_identity_mappings(pgd_t *pgd_
 			if (!pmd_present(*pmd))
 				pte_base = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
 			else
-				pte_base = (pte_t *) page_address(pmd_page(*pmd));
+				pte_base = (pte_t *) pmd_page_kernel(*pmd);
 			pte = pte_base;
 			for (k = 0; k < PTRS_PER_PTE; pte++, k++) {
 				vaddr = i*PGDIR_SIZE + j*PMD_SIZE + k*PAGE_SIZE;
#60 lore raw

Re: [PATCH][2.6-mm] setup_identity_mappings depends on zone init.

Quoted 8 lines · Andrew Morton
Quoted 8 lines

Calling page_address_init() earlier isn't the fix though - pmd pages aren't in highmem so we should never have got that far. Looks like the pgd or the pmd page contains garbage. Did you try it without CONFIG_DEBUG_SLAB? Nick was seeing slab 0x6b patterns on the NUMAQ, inside the pmd, so there's some consistency there. We do have one early setup fix from Manfred, but it's unlikely to cure this.
I'll have a play with your .config, see if I can reproduce it. If not I'll squeeze off -mm3 and would ask you to retest on that if poss.

Quoted 6 lines · Zwane Mwaikambo

I spent a bit of time on this today, and the problem appears to be that we haven't done mem_map or zone initialisation, so mem_map[pfn]->flags is also wrong (e.g. PG_highmem tests). This is still triple faulting on 2.6.5-rc3-mm4 on my boxes. CONFIG_HIGHMEM and any setup without 4MB pages should do it. The following patch got an approving nod from Bill.

A nicer fix, though with potentially too high a "cleanup factor", would be a pte_bootmem_alloc_map() or some such equivalent of pte_alloc_map().

-- wli