Msg from scsi aic7xxx driver or PCI layer on alpha

Hi

I got this messages from the pci allocator and the scsi aic7xxx driver on kernel 2.6.4 on alpha after
reboot: (why is this driver don´t using dma?)

scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2940 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

[..]
scsi0:A:3:0: Tagged Queuing enabled. Depth 128
PCI: Enabling device: (0000:00:07.0), cmd 7
XXX PCI: Unable to reserve mem region #2:1000@a051000 for device 0000:00:07.0
aic7xxx: <Adaptec AHA-294X Ultra SCSI host adapter> at PCI 0/7/0 XXX aic7xxx: I/O ports already in use, ignoring.

lspci -vv gives
00:07.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01)
Subsystem: Adaptec AHA-2940UW SCSI Host Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 32 (2000ns min, 2000ns max), cache line size 08
        Interrupt: pin A routed to IRQ 26
        Region 0: I/O ports at 8400 [size=256]
        Region 1: Memory at 000000000a051000 (32-bit, non-prefetchable) 

[size=4K]
Expansion ROM at 000000000a040000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Tom

LINUX user since kernel 0.99.x 1994.
RPM Alpha packages at http://alpha.steudten.com/packages
Want to know what S.u.S.E 1995 cdrom-set contains?



-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html