ram: rockchip: px30: add a config-based ddr selection
Heiko Stuebner
maintainerPATCH 1/1 ram: rockchip: px30: add a config-based ddr selection
From: Heiko Stuebner <[email protected]>
The SRAM on the PX30 is not big enough to hold multiple DDR configs so it needs to be selected during build.
So far simply the DDR3 config was always selected and getting DDR4 or LPDDR2/3 initialized would require a code modification.
So add Kconfig options similar to RK3399 to allow selecting the DDR4 and LPDDR2/3 options instead, while DDR3 stays the default as before.
--- drivers/ram/rockchip/Kconfig | 21 +++++++++++++++++++++ drivers/ram/rockchip/sdram_px30.c | 8 ++++++++ 2 files changed, 29 insertions(+)
drivers/ram/rockchip/Kconfig +21 -0
@@ -22,6 +22,27 @@ config RAM_ROCKCHIP_DEBUG This is an option for developers to understand the ram drivers initialization, configurations and etc. +config RAM_PX30_DDR4 + bool "DDR3 support for Rockchip PX30" + depends on RAM_ROCKCHIP && ROCKCHIP_PX30 + help + This enables DDR4 sdram support instead of the default DDR3 support + on Rockchip PC30 SoCs. + +config RAM_PX30_LPDDR2 + bool "LPDDR2 support for Rockchip PX30" + depends on RAM_ROCKCHIP && ROCKCHIP_PX30 + help + This enables LPDDR2 sdram support instead of the default DDR3 support + on Rockchip PC30 SoCs. + +config RAM_PX30_LPDDR3 + bool "LPDDR3 support for Rockchip PX30" + depends on RAM_ROCKCHIP && ROCKCHIP_PX30 + help + This enables LPDDR3 sdram support instead of the default DDR3 support + on Rockchip PC30 SoCs. + config RAM_RK3399_LPDDR4 bool "LPDDR4 support for Rockchip RK3399" depends on RAM_ROCKCHIP && ROCKCHIP_RK3399
drivers/ram/rockchip/sdram_px30.c +8 -0
@@ -125,7 +125,15 @@ u32 addrmap[][8] = {struct dram_info dram_info; struct px30_sdram_params sdram_configs[] = { +#if defined(CONFIG_RAM_PX30_DDR4 ) +#include "sdram-px30-ddr4-detect-333.inc" +#elif defined(CONFIG_RAM_PX30_LPDDR2 ) +#include "sdram-px30-lpddr2-detect-333.inc" +#elif defined(CONFIG_RAM_PX30_LPDDR3 ) +#include "sdram-px30-lpddr3-detect-333.inc" +#else #include "sdram-px30-ddr3-detect-333.inc" +#endif }; struct ddr_phy_skew skew = {
Signature · 1 line
2.28.0
PATCH 1/1 ram: rockchip: px30: add a config-based ddr selection
Hi Heiko,
Quoted 57 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
The SRAM on the PX30 is not big enough to hold multiple DDR configs so it needs to be selected during build.
So far simply the DDR3 config was always selected and getting DDR4 or LPDDR2/3 initialized would require a code modification.
So add
Kconfigoptions similar to RK3399 to allow selecting the DDR4 and LPDDR2/3 options instead, while DDR3 stays the default as before.Signed-off-by Heiko Stuebner <[email protected]>--- drivers/ram/rockchip/Kconfig | 21 +++++++++++++++++++++ drivers/ram/rockchip/sdram_px30.c | 8 ++++++++ 2 files changed, 29 insertions(+)drivers/ram/rockchip/Kconfig +21
-0@@ -22,6 +22,27 @@ config RAM_ROCKCHIP_DEBUG This is an option for developers to understand the ram drivers initialization, configurations and etc. +config RAM_PX30_DDR4 + bool "DDR3 support for Rockchip PX30" + depends on RAM_ROCKCHIP && ROCKCHIP_PX30 + help + This enables DDR4 sdram support instead of the default DDR3 support + on Rockchip PC30 SoCs. + +config RAM_PX30_LPDDR2 + bool "LPDDR2 support for Rockchip PX30" + depends on RAM_ROCKCHIP && ROCKCHIP_PX30 + help + This enables LPDDR2 sdram support instead of the default DDR3 support + on Rockchip PC30 SoCs. + +config RAM_PX30_LPDDR3 + bool "LPDDR3 support for Rockchip PX30" + depends on RAM_ROCKCHIP && ROCKCHIP_PX30 + help + This enables LPDDR3 sdram support instead of the default DDR3 support + on Rockchip PC30 SoCs. + config RAM_RK3399_LPDDR4 bool "LPDDR4 support for Rockchip RK3399" depends on RAM_ROCKCHIP && ROCKCHIP_RK3399drivers/ram/rockchip/sdram_px30.c +0
-0@@ -125,7 +125,15 @@ u32 addrmap[][8] = {struct dram_info dram_info;
drivers/ram/rockchip/sdram_px30.c u32 addrmap[][8] = { · line 136
Quoted 10 lines
drivers/ram/rockchip/sdram_px30.c +8
-0struct px30_sdram_params sdram_configs[] = { +#if defined(CONFIG_RAM_PX30_DDR4 ) +#include "sdram-px30-ddr4-detect-333.inc" +#elif defined(CONFIG_RAM_PX30_LPDDR2 ) +#include "sdram-px30-lpddr2-detect-333.inc" +#elif defined(CONFIG_RAM_PX30_LPDDR3 ) +#include "sdram-px30-lpddr3-detect-333.inc" +#else #include "sdram-px30-ddr3-detect-333.inc" +#endif
How about putting this in the device tree? I think that would be a better place.
Regards,
Simon
Quoted 6 lines
drivers/ram/rockchip/sdram_px30.c +0
-1};struct ddr_phy_skew skew = { --2.28.0
Heiko Stübner
maintainerPATCH 1/1 ram: rockchip: px30: add a config-based ddr selection
Hi Simon,
Am Freitag, 2. Oktober 2020, 04:09:56 CEST schrieb Simon Glass:
Quoted 60 lines
Hi Heiko,
Quoted 57 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
The SRAM on the PX30 is not big enough to hold multiple DDR configs so it needs to be selected during build.
So far simply the DDR3 config was always selected and getting DDR4 or LPDDR2/3 initialized would require a code modification.
So add
Kconfigoptions similar to RK3399 to allow selecting the DDR4 and LPDDR2/3 options instead, while DDR3 stays the default as before.Signed-off-by Heiko Stuebner <[email protected]>--- drivers/ram/rockchip/Kconfig | 21 +++++++++++++++++++++ drivers/ram/rockchip/sdram_px30.c | 8 ++++++++ 2 files changed, 29 insertions(+)drivers/ram/rockchip/Kconfig +21
-0@@ -22,6 +22,27 @@ config RAM_ROCKCHIP_DEBUG This is an option for developers to understand the ram drivers initialization, configurations and etc. +config RAM_PX30_DDR4 + bool "DDR3 support for Rockchip PX30" + depends on RAM_ROCKCHIP && ROCKCHIP_PX30 + help + This enables DDR4 sdram support instead of the default DDR3 support + on Rockchip PC30 SoCs. + +config RAM_PX30_LPDDR2 + bool "LPDDR2 support for Rockchip PX30" + depends on RAM_ROCKCHIP && ROCKCHIP_PX30 + help + This enables LPDDR2 sdram support instead of the default DDR3 support + on Rockchip PC30 SoCs. + +config RAM_PX30_LPDDR3 + bool "LPDDR3 support for Rockchip PX30" + depends on RAM_ROCKCHIP && ROCKCHIP_PX30 + help + This enables LPDDR3 sdram support instead of the default DDR3 support + on Rockchip PC30 SoCs. + config RAM_RK3399_LPDDR4 bool "LPDDR4 support for Rockchip RK3399" depends on RAM_ROCKCHIP && ROCKCHIP_RK3399drivers/ram/rockchip/sdram_px30.c +0
-0@@ -125,7 +125,15 @@ u32 addrmap[][8] = {struct dram_info dram_info;
Quoted 12 lines
drivers/ram/rockchip/sdram_px30.c u32 addrmap[][8] = { · line 136
Quoted 10 lines
drivers/ram/rockchip/sdram_px30.c +8
-0struct px30_sdram_params sdram_configs[] = { +#if defined(CONFIG_RAM_PX30_DDR4 ) +#include "sdram-px30-ddr4-detect-333.inc" +#elif defined(CONFIG_RAM_PX30_LPDDR2 ) +#include "sdram-px30-lpddr2-detect-333.inc" +#elif defined(CONFIG_RAM_PX30_LPDDR3 ) +#include "sdram-px30-lpddr3-detect-333.inc" +#else #include "sdram-px30-ddr3-detect-333.inc" +#endif How about putting this in the device tree? I think that would be a better place.
On the PX30 the TPL does the ram initialization and the SRAM it runs in is very limited, so the PX30-TPL doesn't even have devicetree support available - hence the ram selection needs to selected at compiletime.
Even right now we're "dancing" very narrowly on the limit ;-)
Heiko
Heiko Stübner
maintainerPATCH 1/1 ram: rockchip: px30: add a config-based ddr selection
Hi Simon,
Am Freitag, 2. Oktober 2020, 07:58:35 CEST schrieb Heiko St?bner:
Quoted 72 lines
Am Freitag, 2. Oktober 2020, 04:09:56 CEST schrieb Simon Glass:
Quoted 58 lines · Heiko Stuebner
Quoted 57 lines
From: Heiko Stuebner <[email protected]>
The SRAM on the PX30 is not big enough to hold multiple DDR configs so it needs to be selected during build.
So far simply the DDR3 config was always selected and getting DDR4 or LPDDR2/3 initialized would require a code modification.
So add
Kconfigoptions similar to RK3399 to allow selecting the DDR4 and LPDDR2/3 options instead, while DDR3 stays the default as before.Signed-off-by Heiko Stuebner <[email protected]>--- drivers/ram/rockchip/Kconfig | 21 +++++++++++++++++++++ drivers/ram/rockchip/sdram_px30.c | 8 ++++++++ 2 files changed, 29 insertions(+)drivers/ram/rockchip/Kconfig +21
-0@@ -22,6 +22,27 @@ config RAM_ROCKCHIP_DEBUG This is an option for developers to understand the ram drivers initialization, configurations and etc. +config RAM_PX30_DDR4 + bool "DDR3 support for Rockchip PX30" + depends on RAM_ROCKCHIP && ROCKCHIP_PX30 + help + This enables DDR4 sdram support instead of the default DDR3 support + on Rockchip PC30 SoCs. + +config RAM_PX30_LPDDR2 + bool "LPDDR2 support for Rockchip PX30" + depends on RAM_ROCKCHIP && ROCKCHIP_PX30 + help + This enables LPDDR2 sdram support instead of the default DDR3 support + on Rockchip PC30 SoCs. + +config RAM_PX30_LPDDR3 + bool "LPDDR3 support for Rockchip PX30" + depends on RAM_ROCKCHIP && ROCKCHIP_PX30 + help + This enables LPDDR3 sdram support instead of the default DDR3 support + on Rockchip PC30 SoCs. + config RAM_RK3399_LPDDR4 bool "LPDDR4 support for Rockchip RK3399" depends on RAM_ROCKCHIP && ROCKCHIP_RK3399drivers/ram/rockchip/sdram_px30.c +0
-0@@ -125,7 +125,15 @@ u32 addrmap[][8] = {struct dram_info dram_info;Quoted 12 lines
drivers/ram/rockchip/sdram_px30.c u32 addrmap[][8] = { · line 136
Quoted 10 lines
drivers/ram/rockchip/sdram_px30.c +8
-0struct px30_sdram_params sdram_configs[] = { +#if defined(CONFIG_RAM_PX30_DDR4 ) +#include "sdram-px30-ddr4-detect-333.inc" +#elif defined(CONFIG_RAM_PX30_LPDDR2 ) +#include "sdram-px30-lpddr2-detect-333.inc" +#elif defined(CONFIG_RAM_PX30_LPDDR3 ) +#include "sdram-px30-lpddr3-detect-333.inc" +#else #include "sdram-px30-ddr3-detect-333.inc" +#endif How about putting this in the device tree? I think that would be a better place.
Quoted 5 lines
On the PX30 the TPL does the ram initialization and the SRAM it runs in is very limited, so the PX30-TPL doesn't even have devicetree support available - hence the ram selection needs to selected at compiletime.
Even right now we're "dancing" very narrowly on the limit ;-)
Just to provide some more detail, in the PX30-TPL there is neither devicetree nor driver model support and of the 10240bytes of available sram, the current TPL binary already uses 10184 bytes.
So right now we have a whopping 56 bytes still available, which doesn't leave wiggleroom at all and I actually need to hope that uboot stays on its diet ;-) .
Heiko
PATCH 1/1 ram: rockchip: px30: add a config-based ddr selection
In reply to Simon GlassQuoted 61 lines · Simon Glass
Hi Heiko,
Quoted 57 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
The SRAM on the PX30 is not big enough to hold multiple DDR configs so it needs to be selected during build.
So far simply the DDR3 config was always selected and getting DDR4 or LPDDR2/3 initialized would require a code modification.
So add
Kconfigoptions similar to RK3399 to allow selecting the DDR4 and LPDDR2/3 options instead, while DDR3 stays the default as before.Signed-off-by Heiko Stuebner <[email protected]>--- drivers/ram/rockchip/Kconfig | 21 +++++++++++++++++++++ drivers/ram/rockchip/sdram_px30.c | 8 ++++++++ 2 files changed, 29 insertions(+)drivers/ram/rockchip/Kconfig +21
-0@@ -22,6 +22,27 @@ config RAM_ROCKCHIP_DEBUG This is an option for developers to understand the ram drivers initialization, configurations and etc. +config RAM_PX30_DDR4 + bool "DDR3 support for Rockchip PX30" + depends on RAM_ROCKCHIP && ROCKCHIP_PX30 + help + This enables DDR4 sdram support instead of the default DDR3 support + on Rockchip PC30 SoCs. + +config RAM_PX30_LPDDR2 + bool "LPDDR2 support for Rockchip PX30" + depends on RAM_ROCKCHIP && ROCKCHIP_PX30 + help + This enables LPDDR2 sdram support instead of the default DDR3 support + on Rockchip PC30 SoCs. + +config RAM_PX30_LPDDR3 + bool "LPDDR3 support for Rockchip PX30" + depends on RAM_ROCKCHIP && ROCKCHIP_PX30 + help + This enables LPDDR3 sdram support instead of the default DDR3 support + on Rockchip PC30 SoCs. + config RAM_RK3399_LPDDR4 bool "LPDDR4 support for Rockchip RK3399" depends on RAM_ROCKCHIP && ROCKCHIP_RK3399drivers/ram/rockchip/sdram_px30.c +0
-0@@ -125,7 +125,15 @@ u32 addrmap[][8] = {struct dram_info dram_info;
Quoted 12 lines
drivers/ram/rockchip/sdram_px30.c u32 addrmap[][8] = { · line 136
Quoted 10 lines
drivers/ram/rockchip/sdram_px30.c +8
-0struct px30_sdram_params sdram_configs[] = { +#if defined(CONFIG_RAM_PX30_DDR4 ) +#include "sdram-px30-ddr4-detect-333.inc" +#elif defined(CONFIG_RAM_PX30_LPDDR2 ) +#include "sdram-px30-lpddr2-detect-333.inc" +#elif defined(CONFIG_RAM_PX30_LPDDR3 ) +#include "sdram-px30-lpddr3-detect-333.inc" +#else #include "sdram-px30-ddr3-detect-333.inc" +#endif How about putting this in the device tree? I think that would be a better place.
I did try this while support Engicam PX30.Core. Seems impossible to drive with the timings via device tree.
With PLATDATA and disabled unused drivers in TPL, I still way behind 0x3000 bytes.
MKIMAGE u-boot.itb
MKIMAGE tpl/u-boot-tpl-rockchip.bin
Error: SPL image is too large (size 0x5800 than 0x2800)
Error: Bad parameters for image type
Jagan.
PATCH 1/1 ram: rockchip: px30: add a config-based ddr selection
In reply to Heiko StuebnerQuoted 6 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
The SRAM on the PX30 is not big enough to hold multiple DDR configs so it needs to be selected during build.
Quoted 8 lines
So far simply the DDR3 config was always selected and getting DDR4 or LPDDR2/3 initialized would require a code modification.
So add
Kconfigoptions similar to RK3399 to allow selecting the DDR4 and LPDDR2/3 options instead, while DDR3 stays the default as before.Signed-off-by Heiko Stuebner <[email protected]>---
PATCH 1/1 ram: rockchip: px30: add a config-based ddr selection
In reply to Heiko StuebnerQuoted 5 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
The SRAM on the PX30 is not big enough to hold multiple DDR configs so it needs to be selected during build.
Quoted 7 lines
So far simply the DDR3 config was always selected and getting DDR4 or LPDDR2/3 initialized would require a code modification.
So add
Kconfigoptions similar to RK3399 to allow selecting the DDR4 and LPDDR2/3 options instead, while DDR3 stays the default as before.Signed-off-by Heiko Stuebner <[email protected]>
Thanks,
- Kever
Quoted 57 lines
--- drivers/ram/rockchip/Kconfig | 21 +++++++++++++++++++++ drivers/ram/rockchip/sdram_px30.c | 8 ++++++++ 2 files changed, 29 insertions(+)drivers/ram/rockchip/Kconfig +21
-0@@ -22,6 +22,27 @@ config RAM_ROCKCHIP_DEBUG This is an option for developers to understand the ram drivers initialization, configurations and etc. +config RAM_PX30_DDR4 + bool "DDR3 support for Rockchip PX30" + depends on RAM_ROCKCHIP && ROCKCHIP_PX30 + help + This enables DDR4 sdram support instead of the default DDR3 support + on Rockchip PC30 SoCs. + +config RAM_PX30_LPDDR2 + bool "LPDDR2 support for Rockchip PX30" + depends on RAM_ROCKCHIP && ROCKCHIP_PX30 + help + This enables LPDDR2 sdram support instead of the default DDR3 support + on Rockchip PC30 SoCs. + +config RAM_PX30_LPDDR3 + bool "LPDDR3 support for Rockchip PX30" + depends on RAM_ROCKCHIP && ROCKCHIP_PX30 + help + This enables LPDDR3 sdram support instead of the default DDR3 support + on Rockchip PC30 SoCs. + config RAM_RK3399_LPDDR4 bool "LPDDR4 support for Rockchip RK3399" depends on RAM_ROCKCHIP && ROCKCHIP_RK3399drivers/ram/rockchip/sdram_px30.c +8
-0@@ -125,7 +125,15 @@ u32 addrmap[][8] = {struct dram_info dram_info; struct px30_sdram_params sdram_configs[] = { +#if defined(CONFIG_RAM_PX30_DDR4 ) +#include "sdram-px30-ddr4-detect-333.inc" +#elif defined(CONFIG_RAM_PX30_LPDDR2 ) +#include "sdram-px30-lpddr2-detect-333.inc" +#elif defined(CONFIG_RAM_PX30_LPDDR3 ) +#include "sdram-px30-lpddr3-detect-333.inc" +#else #include "sdram-px30-ddr3-detect-333.inc" +#endif }; struct ddr_phy_skew skew = {
PATCH 1/1 ram: rockchip: px30: add a config-based ddr selection
In reply to Heiko StuebnerQuoted 9 lines · Heiko Stuebner
From: Heiko Stuebner <[email protected]>
The SRAM on the PX30 is not big enough to hold multiple DDR configs so it needs to be selected during build.
Quoted 7 lines
So far simply the DDR3 config was always selected and getting DDR4 or LPDDR2/3 initialized would require a code modification.
So add
Kconfigoptions similar to RK3399 to allow selecting the DDR4 and LPDDR2/3 options instead, while DDR3 stays the default as before.Signed-off-by Heiko Stuebner <[email protected]>