spi-nor: Add support for xt25f128b
Subsystems (2)
PATCH 1/1 spi-nor: Add support for xt25f128b
This adds support for the xt25f128b as found on the rockpi4b SBC.
---
This continues the efforts done in [1] & [2] that went stale. I've tested this patch on my RockPi4b which only has the xt25f128b (and not the xt25f32b as also propsed in [2]). I have tried to obtain a copy of the datasheets but was unable to find them. Not sure whre you would get them.
While [1] was already for the new spi-nor layout it was missing the bits in the core.{c,h} files.
[1]: https://patchwork.ozlabs.org/project/linux-mtd/patch/CAMgqO2y9MYDj6antOaWLBRKU8vGEwqCB-Y1TkXTSWsmsed+W6A@mail.gmail.com/
[2]: https://patchwork.ozlabs.org/project/linux-mtd/patch/[email protected]/
drivers/mtd/spi-nor/Makefile | 1 + drivers/mtd/spi-nor/core.c | 1 + drivers/mtd/spi-nor/core.h | 1 + drivers/mtd/spi-nor/xtx.c | 16 ++++++++++++++++ 4 files changed, 19 insertions(+) create mode 100644 drivers/mtd/spi-nor/xtx.c
drivers/mtd/spi-nor/Makefile +1 -0
@@ -17,6 +17,7 @@ spi-nor-objs += sst.o spi-nor-objs += winbond.o spi-nor-objs += xilinx.o spi-nor-objs += xmc.o +spi-nor-objs += xtx.o obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o obj-$(CONFIG_MTD_SPI_NOR) += controllers/
drivers/mtd/spi-nor/core.c +1 -0
@@ -2024,6 +2024,7 @@ static const struct spi_nor_manufacturer *manufacturers[] = { &spi_nor_winbond, &spi_nor_xilinx, &spi_nor_xmc, + &spi_nor_xtx, }; static const struct flash_info *
drivers/mtd/spi-nor/core.h +1 -0
@@ -398,6 +398,7 @@ extern const struct spi_nor_manufacturer spi_nor_sst;extern const struct spi_nor_manufacturer spi_nor_winbond;extern const struct spi_nor_manufacturer spi_nor_xilinx;extern const struct spi_nor_manufacturer spi_nor_xmc; +extern const struct spi_nor_manufacturer spi_nor_xtx;int spi_nor_write_enable (struct spi_nor *nor);int spi_nor_write_disable (struct spi_nor *nor);
drivers/mtd/spi-nor/xtx.c new file +16 -0
@@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/mtd/spi-nor.h> + +#include "core.h" + +static const struct flash_info xtx_parts[] = { +/* XTX (Shenzhen Xin Tian Xia Tech) */ + {"xt25f128b" ,INFO (0x0b4018 ,0 ,64 *1024 ,256 ,SECT_4K ) }, +}; + +const struct spi_nor_manufacturer spi_nor_xtx = { + .name ="xtx" , + .parts = xtx_parts, + .nparts =ARRAY_SIZE (xtx_parts), +};
Signature · 6 lines
2.29.2 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
Hi, Andreas,
Quoted 69 lines · Andreas Rammhold
EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
This adds support for the xt25f128b as found on the rockpi4b SBC.
Signed-off-by Andreas Rammhold <[email protected]>---
This continues the efforts done in [1] & [2] that went stale. I've tested this patch on my RockPi4b which only has the xt25f128b (and not the xt25f32b as also propsed in [2]). I have tried to obtain a copy of the datasheets but was unable to find them. Not sure whre you would get them.
While [1] was already for the new spi-nor layout it was missing the bits in the core.{c,h} files.
[1]: https://patchwork.ozlabs.org/project/linux-mtd/patch/CAMgqO2y9MYDj6antOaWLBRKU8vGEwqCB-Y1TkXTSWsmsed+W6A@mail.gmail.com/
[2]: https://patchwork.ozlabs.org/project/linux-mtd/patch/[email protected]/drivers/mtd/spi-nor/Makefile | 1 + drivers/mtd/spi-nor/core.c | 1 + drivers/mtd/spi-nor/core.h | 1 + drivers/mtd/spi-nor/xtx.c | 16 ++++++++++++++++ 4 files changed, 19 insertions(+) create mode 100644 drivers/mtd/spi-nor/xtx.cdrivers/mtd/spi-nor/Makefile +1
-0@@ -17,6 +17,7 @@ spi-nor-objs += sst.o spi-nor-objs += winbond.o spi-nor-objs += xilinx.o spi-nor-objs += xmc.o +spi-nor-objs += xtx.o obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o obj-$(CONFIG_MTD_SPI_NOR) += controllers/drivers/mtd/spi-nor/core.c +1
-0@@ -2024,6 +2024,7 @@ static const struct spi_nor_manufacturer *manufacturers[] = { &spi_nor_winbond, &spi_nor_xilinx, &spi_nor_xmc, + &spi_nor_xtx, }; static const struct flash_info *drivers/mtd/spi-nor/core.h +1
-0@@ -398,6 +398,7 @@ extern const struct spi_nor_manufacturer spi_nor_sst;extern const struct spi_nor_manufacturer spi_nor_winbond;extern const struct spi_nor_manufacturer spi_nor_xilinx;extern const struct spi_nor_manufacturer spi_nor_xmc; +extern const struct spi_nor_manufacturer spi_nor_xtx;int spi_nor_write_enable (struct spi_nor *nor);int spi_nor_write_disable (struct spi_nor *nor);drivers/mtd/spi-nor/xtx.c new file +0
-0
drivers/mtd/spi-nor/xtx.c line 9
Quoted 9 lines
drivers/mtd/spi-nor/xtx.c new file +9
-0@@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/mtd/spi-nor.h> + +#include "core.h" + +static const struct flash_info xtx_parts[] = { +/* XTX (Shenzhen Xin Tian Xia Tech) */ + {"xt25f128b" ,INFO (0x0b4018 ,0 ,64 *1024 ,256 ,SECT_4K ) },
According to JEP106BA, the XTX's identification code is in bank 10 and is comprised of 9 Continuation Codes (0x7f) and then by 0B. XTX's manufacturer ID should be:0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x0b.
Can you hack the SPI_NOR_MAX_ID_LEN field, in order to read 12 or more bytes? I assume XTX got it wrong, and put the continuation codes after the flash ID.
Cheers,
ta
Quoted 10 lines
drivers/mtd/spi-nor/xtx.c new file +7
-1+}; + +const struct spi_nor_manufacturer spi_nor_xtx = { + .name ="xtx" , + .parts = xtx_parts, + .nparts =ARRAY_SIZE (xtx_parts), +}; --2.29.2