Skip to contentSkip to conversation

Cannot open root device on 2.6.4

DISCUSSION Paul Hickey 1 participant 1 message Mar 22, 2004

lore
Share & tools
lore
#0 lore raw

Running RH9 on a AMD686. Kernel 2.4.8 works fine.

I receive the follwing error when booting my new 2.6.4 kernel:
_______________________________________________________
*VFS: Cannot open root device "LABEL=/" or unknown-block(0,0) Please append a correct "root=" boot option
Kernel Panic: VFS: Unable to mount root fs on unknown-block(0,0)*
_______________________________________________________
Upon compiling the kernel I was informed that:

Root Device is (3,2)
Does that have something to do with it? Please advise the appropriate action to [email protected] I tried it with initrd as well as the above both with the same error.

Below is my grub.conf
______________________________________________________

# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE:  You have a /boot partition.  This means that
#          all kernel and initrd paths are relative to /boot/, eg.
#          root (hd0,0)
#          kernel /vmlinuz-version ro root=/dev/hda2
#          initrd /initrd-version.img
#boot=/dev/hda
default=0
timeout=10
splashimage=(hd0,0)/grub/splash.xpm.gz
title Red Hat Linux (2.4.20-8)
   root (hd0,0)
   kernel /vmlinuz-2.4.20-8 ro root=LABEL=/
   initrd /initrd-2.4.20-8.img
title Test Kernel (2.6.4)
   root (hd0,0)
   kernel /bzImage-2.6.4-1 ro root=LABEL=/
____________________________________________________