DX spoots via UI frames
I'm looking for a program under Linux that connects to a cluster and retransmit dx spots to unproto.
Quoted 2 lines · Waldek
I'm looking for a program under Linux that connects to a cluster and retransmit dx spots to unproto.
I don't know whether a specialised program exists or not, but you could probably do that with telnet/ax25_call (depending on the source of your spots) and the beacon command.
HTH & B73,
Andrea.
Signature · 2 lines
Homepage: http://andrea.borgia.bo.it / Amateur radio: IZ4FHT Key fingerprint: 4037 9711 85C6 F9F9 A505 FA0A BB62 3A3C F7BA 9B13
Quoted 1 line · Użytkownik Andrea Borgia
I don't know whether a specialised program exists or not, but you could probably do that with telnet/ax25_call (depending on the source of your spots) and the beacon command.
Yes it is good idea and a try to do this but I have problem how to put info from ax25_call to becaon:
ax25_call port sp2abc sr2dxc | beacon -c sr2dxc -d DX vhf ??? this is don't work
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 2 lines · Waldek
Yes it is good idea and a try to do this but I have problem how to put info from
ax25_callto becaon:ax25_callport sp2abc sr2dxc | beacon -c sr2dxc -d DX vhf ??? this is don't work
Ach, that was my idea 8-( You could also try with ax25mond, but then you have to write some glue code to parse the data.
B73,
Andrea.
Signature · 2 lines
Homepage: http://andrea.borgia.bo.it / Amateur radio: IZ4FHT Key fingerprint: 4037 9711 85C6 F9F9 A505 FA0A BB62 3A3C F7BA 9B13
Re: DX spots via UI frames
In reply to WaldekQuoted 2 lines · Waldek
I'm looking for a program under Linux that connects to a cluster and retransmit dx spots to unproto.
I dont know either about such a program. Maybe this function could be implemented into DxNet itself ?
By the way, I think that DxNet source of the program is not very easy to find.
It is barely referenced through Google and I did not see it on Linux Ham site http://radio.linux.org.au/
For those who would like to run DxNet developped by F5MZN here are some clues.
24h/day more than 500 'nodes' are interconnected worldwide through HF or Internet. On average 3500 users share DX spots this way.
You can find information for subscribing to the DxNet list here :
http://www.f6fbb.org/mailman/listinfo/dxnet
Browse the list archives here :
http://www.f6fbb.org/pipermail/dxnet/
Read this to see how to use cvs for downloading the source code of DxNet :
http://www.f6fbb.org/pipermail/dxnet/2002-July/000778.html
A user can access a DxNet node via Packet Radio or Telnet to port 9000. Then you receive DX spots line by line.
An there are a lot of usefull user commands.
For evaluation you can try to access F5MZN DxNet node here :
73 de Bernard, f6bvp
Re: DX spots via UI frames
Quoted 32 lines · Bernard Pidoux
Quoted 2 lines · Waldek
I'm looking for a program under Linux that connects to a cluster and retransmit dx spots to unproto.
I dont know either about such a program. Maybe this function could be implemented into DxNet itself ?
By the way, I think that DxNet source of the program is not very easy to find.
It is barely referenced through Google and I did not see it on Linux Ham site http://radio.linux.org.au/For those who would like to run DxNet developped by F5MZN here are some clues.
24h/day more than 500 'nodes' are interconnected worldwide through HF or Internet. On average 3500 users share DX spots this way.
You can find information for subscribing to the DxNet list here :
http://www.f6fbb.org/mailman/listinfo/dxnetBrowse the list archives here :
http://www.f6fbb.org/pipermail/dxnet/Read this to see how to use cvs for downloading the source code of DxNet :
http://www.f6fbb.org/pipermail/dxnet/2002-July/000778.htmlA user can access a DxNet node via Packet Radio or Telnet to port 9000. Then you receive DX spots line by line.
An there are a lot of usefull user commands.
Quoted 6 lines
For evaluation you can try to access F5MZN DxNet node here :
73 de Bernard, f6bvp
Another DX Cluster implementation for Linux (written in Perl) is DX Spider at <http://www.dxcluster.org>. It also runs under Windows (but why would one do that?)
73, Bob N7XY