a lot of different cards and controls
My driver is almost complete and I'm working to make it acceptable for inclusion in alsa-driver. It drives 8 different cards and it raises some problems. The main file is echoaudio.c and is contains all the control interfaces of all cards. It registers only the controls a card has at runtime, so there is some useless bloat for some cards. It's not very much because the lowlevel functions are defined in <card>Dsp.c and they are just empty functions if the card hasn't that feature. I wonder if this is ok. Otherwise I could split echoaudio.c into smaller peices and create several echoaudio_<card>.c files that contain something like this:
#include "mixer_ctl.c"
#include "inputclock_ctl.c"
...
#include "echoaudio_main.c"
So it compiles only the parts that are really needed, at the cost of having a lot more files and a bit less clear structure. What is the preferred method ?
--
Giuliano.
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
I believe better structure should be the way to go. And since you're the one writing the drivers it is better if you follow the way you find it more reasonable and better for other people to understand.
Quoted 26 lines · Giuliano Pochini
My driver is almost complete and I'm working to make it acceptable for inclusion in alsa-driver. It drives 8 different cards and it raises some problems. The main file is
echoaudio.cand is contains all the control interfaces of all cards. It registers only the controls a card has at runtime, so there is some useless bloat for some cards. It's not very much because the lowlevel functions are defined in <card>Dsp.c and they are just empty functions if the card hasn't that feature. I wonder if this is ok. Otherwise I could splitechoaudio.cinto smaller peices and create several echoaudio_<card>.c files that contain something like this:#include "
mixer_ctl.c"
#include "inputclock_ctl.c"
...
#include "echoaudio_main.c"So it compiles only the parts that are really needed, at the cost of having a lot more files and a bit less clear structure. What is the preferred method ?
--
Giuliano.
Quoted 13 lines
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click