Skip to contentSkip to conversation

LARTC digest, Vol 1 #1647 - 2 msgs

LARTC Masanao Yasui 1 participant 1 message Mar 23, 2004

lore
Share & tools
lore
#0 lore raw
Quoted 17 lines · [email protected] wrote:

--__--__--

Message: 1
From: "Morten Kramer" <[email protected]>
To: <[email protected]>
Date: Mon, 22 Mar 2004 21:00:14 +0100
Subject: [LARTC] How to limit the Upload speed for an specific IP?

This is a multi-part message in MIME format.

------=_NextPart_000_0255_01C41050.ABDECCF0

Content-Type: text/plain;
	charset="iso-8859-1"

Content-Transfer-Encoding: quoted-printable

Hello,

Quoted 9 lines

I want to limit the upload speed for the eth0 Interface for an specific > IP.

I used the following script, but its only limits the DOWNLOAD speed.But > i want to limit both!

DEV='eth0'
tc qdisc add dev $DEV root handle 1: cbq avpkt 1000 bandwidth 768kbit
tc class add dev $DEV parent 1: classid 1:1 cbq rate 100kbit allot 1500 > prio 5 bounded isolated tc filter add dev $DEV parent 1: protocol ip prio 16 u32 match ip dst > 192.168.0.2 flowid 1:1

Hello,

If you change "dst" into "src",
you can control outgoing traffic rate..., I think.

Signature · 6 lines
Masanao Yasui
mailto:[email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/