proxy arp behaviour
Hello everybody,
I would like some info about proxy arp behaviour.
I have a firewall linux running kernel 2.4.25
with 3 NIC. Proxy arp is enabled on two of them
(eth0 and eth1).
eth1 configuration is here:
ifconfig eth1 10.77.77.1 broadcast 10.77.77.3 netmask 255.255.255.252 ip route del 10.77.77.0/30 dev eth1
ip route add 172.17.1.0/24 dev eth1
echo 1 > /proc/sys/net/ipv4/conf/eth1/proxy_arp
Hosts connected to eth1 are all 172.17.1.0/24.
The linux box is now replying to arp requests
that are sent by 172.17.1.0/24 hosts on the eth1
network segment. Is this because ip on eth1 is
10.77.77.1?
I think that linux should not reply to arp request for 172.17.1.0/24 because of:
ip route add 172.17.1.0/24 dev eth1
Is this a bug?
TIA
Quoted 21 lines · Marco Berizzi
Hello everybody,
I would like some info about proxy arp behaviour.
I have a firewall linux running kernel 2.4.25
with 3 NIC. Proxy arp is enabled on two of them
(eth0 and eth1).eth1 configuration is here:
ifconfig eth1 10.77.77.1 broadcast 10.77.77.3 netmask 255.255.255.252 ip route del 10.77.77.0/30 dev eth1
ip route add 172.17.1.0/24 dev eth1echo 1 >
/proc/sys/net/ipv4/conf/eth1/proxy_arpHosts connected to eth1 are all 172.17.1.0/24.
The linux box is now replying to arp requests
that are sent by 172.17.1.0/24 hosts on the eth1
network segment. Is this because ip on eth1 is
10.77.77.1?
Quoted 6 lines
I think that linux should not reply to arp request for 172.17.1.0/24 because of:
ip route add 172.17.1.0/24 dev eth1
Is this a bug?
This problem comes up periodically and when it does there results in a bunch of noise to show that "Linux works perfectly...", but never with any resolution.
What needs to be answered by persons who know the network code is how one "connects" a particular response to a particular device.
This has become a FAQ and needs to have some written documentation somewhere.
Cheers,
Dick Johnson
Penguin : Linux version 2.4.24 on an i686 machine (797.90 BogoMips).
Note 96.31% of all statistics are fiction.
Quoted 6 lines · Marco Berizzi
eth1 configuration is here:
ifconfig eth1 10.77.77.1 broadcast 10.77.77.3 netmask 255.255.255.252 ip route del 10.77.77.0/30 dev eth1
ip route add 172.17.1.0/24 dev eth1
Quoted 6 lines
echo 1 >
/proc/sys/net/ipv4/conf/eth1/proxy_arpHosts connected to eth1 are all 172.17.1.0/24.
The linux box is now replying to arp requests
that are sent by 172.17.1.0/24 hosts on the eth1
network segment.
Arp requests for what IP addresses?
Chris
Quoted 8 lines · Chris Friesen
Quoted 6 lines · Marco Berizzi
eth1 configuration is here:
ifconfig eth1 10.77.77.1 broadcast 10.77.77.3 netmask 255.255.255.252 ip route del 10.77.77.0/30 dev eth1
ip route add 172.17.1.0/24 dev eth1
Quoted 8 lines
Quoted 6 lines
echo 1 >
/proc/sys/net/ipv4/conf/eth1/proxy_arpHosts connected to eth1 are all 172.17.1.0/24.
The linux box is now replying to arp requests
that are sent by 172.17.1.0/24 hosts on the eth1
network segment.Arp requests for what IP addresses?
The linux box is replying to arp requests for 172.17.1.0/24, sent by 172.17.1.0/24 systems (windoze 2000 and Linux 2.4.25).