Skip to contentSkip to conversation

emu10k1 capture period sizes?

DISCUSSION James Courtier-Dutton 2 participants 2 messages Mar 26, 2004

lore
Share & tools
lore
#0 lore raw

Extract from ./sound/pci/emu10k1/emupcm.c

static unsigned int capture_period_sizes[31] = {
        384,    448,    512,    640,
        384*2,  448*2,  512*2,  640*2,
        384*4,  448*4,  512*4,  640*4,
        384*8,  448*8,  512*8,  640*8,
        384*16, 448*16, 512*16, 640*16,
        384*32, 448*32, 512*32, 640*32,
        384*64, 448*64, 512*64, 640*64,
        384*128,448*128,512*128
};

This makes the minimum period size that I can record from the MIC to be 384 frames.

I would like period sized to be 20ms (Used by the GSM codec) in length for a VoIP application I am working on. VoIP generally works with 8000Hz sample rate to match that on Telco ISDN/Digital trunk lines.

If the sample rate is 8000Hz, a period size of 384 frames makes for a 48ms which would add too much latency to the conversation.

Ideally I would like to set the minimum period size to be 160 frames which is 20ms.

Is there any technical reason why I cannot just add 160 to the table above?

If it is ok, can someone please add it to the alsa-driver tree.

Cheers
James

-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click

#1 lore raw
Quoted 20 lines · James Courtier-Dutton

Extract from ./sound/pci/emu10k1/emupcm.c

static unsigned int capture_period_sizes[31] = {
         384,    448,    512,    640,
         384*2,  448*2,  512*2,  640*2,
         384*4,  448*4,  512*4,  640*4,
         384*8,  448*8,  512*8,  640*8,
         384*16, 448*16, 512*16, 640*16,
         384*32, 448*32, 512*32, 640*32,
         384*64, 448*64, 512*64, 640*64,
         384*128,448*128,512*128
};

This makes the minimum period size that I can record from the MIC to be 384 frames.

I would like period sized to be 20ms (Used by the GSM codec) in length for a VoIP application I am working on. VoIP generally works with 8000Hz sample rate to match that on Telco ISDN/Digital trunk lines.

Quoted 7 lines

If the sample rate is 8000Hz, a period size of 384 frames makes for a 48ms which would add too much latency to the conversation.

Ideally I would like to set the minimum period size to be 160 frames which is 20ms.

Is there any technical reason why I cannot just add 160 to the table above?

Yes, hardware cannot handle this size. I suggest to use another master timer (for example set the playback period to required frequency). The capture pointer resolution should be good.

Jaroslav

-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs

-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click