hcitool scan gives timeout on an ipaq 5500

hello list:

ive been using bluez on an ipaq, but im having some problems:

how i set up bt on ipaq:

# uname -r
2.4.19-rmk6-pxa1-hh36
# pand
PAN daemon version 1.1rc2
..
# hcitool
hcitool - HCI Tool ver 2.2
# hcid --version
hcid: invalid option -- -
hcid - HCI daemon ver 2.3

#hciattach /dev/tts/1 any 921600

# hciconfig
hci0:   Type: UART
      BD Address: 08:00:17:1F:C5:E4 ACL MTU: 339:4  SCO MTU: 60:9
      UP RUNNING PSCAN ISCAN
      RX bytes:88 acl:0 sco:0 events:11 errors:1
      TX bytes:652 acl:0 sco:0 commands:25 errors:0

... and the hcid.conf files are similar on both the ipaq and my pc

when i try hcitool scan on ipaq:

# hcitool scan
Scanning ...
Inquiry failed.: Connection timed out

when i try on my pc:

# hcitool scan
Scanning ...
      08:00:17:1F:C5:E4       ipaq

then when i put my pc on: pand --listen --role GN
...and try to connect: pand --connect 00:10:60:A4:89:15 (on the ipaq side)

it doesn t establish connection.

but on the other end if i try to switch roles, the pc can connect to the ipaq (the ipaq is now GN) then it works out ok.

any ideas on whats happening?

thanks all

filipe

-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users