Skip to contentSkip to conversation

strange e1000 performance issues

DISCUSSION Chris Friesen 1 participant 1 message Apr 9, 2004

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

I've got a pair of dual G5s running 2.6.4. For a second gigE link we added in some Intel 82540EM cards, using the mainline e1000 driver with NAPI enabled. lspci reports the bus as 66MHz. The cards were connected together with a crossover cable.

A basic UDP packet-blasting program in userspace using 64KB datagrams could only manage 47MB/s of data throughput, using 20% of a cpu.

For comparison, the same program managed 108.9 MB/s with 30% cpu when using the onboard gigE ports.

Also, I tried setting a larger mtu using "ip set link dev ethx mtu xxxxx". No matter what value I chose (even setting it to its default value, which should have had zero effect) it resulted in the link not being able to transfer data. Downing/upping the link didn't clear the issue, neither did unloading/reloading the driver module. It took a reboot to actually get it working again.

Any ideas what's going on?

Thanks,

Chris