via 6420 pata/sata controller
Quoted 23 lines
Quoted 13 lines · Bartlomiej Zolnierkiewicz
Quoted 9 lines · Zdenek Tlusty
hello,
I have problem with via 6420 controller under linux (I have mandrake 9.1 with kernel 2.4.25 with libata patch version 16).
This controller has two sata and one pata channels. Sata channel works fine with libata. My problem is with pata channel. I have pata hard disk on this controller. Bios of the controller detected this disk but linux did not. What is the current status of the driver for this controller? Thank you for your time.Quoted 4 lines
There are some patches floating around adding support for VT6410 (not VT6420) to generic IDE PCI driver. This controller may also work with generic IDE PCI driver (PCI VendorID/ProductID needs to be added to
drivers/ide/pci/generic.handdrivers/ide/pci/generic.c).VT 6420 should be added to
via82cxxx.c, since it does the necessary bus setup and such. AFAICS it is programmed just like all the other VIA PATA controllers.
Quoted 7 lines
Quoted 1 line
BTW Does anybody has contacts in VIA?
Sure... I'll check my VT 6420 cards as well. It should just be another PCI id added to
via82cxxx.c.Jeff
Hello,
I tried to modify via82cxxx.c and .h, but was unsuccessful. Has anyone got it to work properly?
Kamil Okac