Dosemu and printing.
Hi,
I'm sure there is a simple explanation of my problem, however, so far, I'm failing to find the answer.
There is a small clipper-like app which I use under dosemu and what I want is to be able to print from it directly to lp0.
And this of course works fine, but apart from normal characters which are printed out there are special codes visible also like:
^[&18C
^[(s9H
I presume I have to modify input filter in my /etc/printcap but I don't know how.
I'm using latest apsfilter and LPRng.
dosemu is 1.2.1
/etc/printcap:
lp|ijs/DESKJET_640;r=300x300;q=medium;c=full;p=a4;m=auto:\
:lp=/dev/null:\
:if=/etc/apsfilter/basedir/bin/apsfilter:\
:sd=/var/spool/lpd/lp:\
:lf=/var/spool/lpd/lp/log:\
:af=/var/spool/lpd/lp/acct:\
:mx#0:\
:sh:Signature · 4 lines
Pozdrawiam - Pawel Dlugosz "Keep Your sources wide open."
Quoted 6 lines · Pawel Dlugosz
but apart from normal characters
which are printed out there are
special codes visible also like:
^[&18C
^[(s9H
Wild guess but maybe you need to load ANSI.SYS in CONFIG.SYS.
Clarence Dang wrote:
[..]
Quoted 1 line
Wild guess but maybe you need to load ANSI.SYS in CONFIG.SYS.
Thanks for the tip but I only needed to add another printer from apsfilter setup with printing method set to 'raw'. Simple as that when You know how to do this ;)
Signature · 8 lines
Pozdrawiam - Pawel Dlugosz "To jest mi¶ na miarê naszych mo¿liwo¶ci." - To unsubscribe from this list: send the line "unsubscribe linux-msdos" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html