Skip to contentSkip to conversation

Booting from Adaptec PCI-X 133 29320 Rev C

Kernel 2.4.26 Jason Brian Friedrich 2 participants 3 messages Apr 21, 2004 – Apr 23, 2004

lore
Share & tools
lore
#0 lore raw

Hello everyone,

we can not boot from an "Adaptec PCI-X 133 29320 Rev C" device when using 2.4.26. We get a kernel panic and that the kernel could not mount root (VFS: Unable to mount root fs on 08:03). With 2.4.25 everything works properly (its the same config) but we need the security patches included in 2.4.26.

I have not found any entries in the changelog about changes in the scsi drivers.

Thanks in advance,

Jason Brian Friedrich

#1 lore raw
Quoted 10 lines · Jason Brian Friedrich

Hello everyone,

we can not boot from an "Adaptec PCI-X 133 29320 Rev C" device when using 2.4.26. We get a kernel panic and that the kernel could not mount root (VFS: Unable to mount root fs on 08:03). With 2.4.25 everything works properly (its the same config) but we need the security patches included in 2.4.26.

I have not found any entries in the changelog about changes in the scsi drivers.

Jason, can you please save the boot messages from both 2.4.25 and 2.4.26?

Maybe you have a serial console around or at least you copy the relevant parts (the card detection success with 2.4.25 and the card detection failure with 2.4.26), plus the config files for both cases, and send us?

That would be helpful. There are no aic7xxx changes in 2.4.26. Are you using ACPI?

#2 lore raw
Quoted 9 lines · Marcelo Tosatti
Quoted 1 line · Jason Brian Friedrich

[problem booting from a "Adaptec PCI-X 133 29320 Rev C" with 2.4.26 but not with 2.4.25]

Jason, can you please save the boot messages from both 2.4.25 and 2.4.26?

Maybe you have a serial console around or at least you copy the relevant parts (the card detection success with 2.4.25 and the card detection failure with 2.4.26), plus the config files for both cases, and send us?

That would be helpful. There are no aic7xxx changes in 2.4.26. Are you using ACPI?

Hi Marcelo,

i will send you the boot messages from both kernels today as soon as possible. I think we have some serial consoles here so that it should be possible to give you the information about the card detection. Should i send you the config files via email (also to the list?) or should i put them on a server so you can download them? I dont know which way you prefer. And yes, we are using ACPI.

So far,

Jason Brian Friedrich