AC adapter status wrong after resume (swsusp, pmdsik) - the second...
Hi,
this issue was already discussed on the 22.03.04.
However, there was no real solution found, but unloading/loading modules.
I get the same on a compaq nx5000 (2.6.5 Kernel):
Suspend works fine.
If ac_adapter is (un-)plugged after suspend, when machine is off, the value in /proc is wrong after resume. The workaround suggested (unload/load battery/ac module) seems not to work for this machine.
Someone wanted to open a bug, but I cannot find it.
What info do you need and I will open a bug report, maybe it has been forgotten? Can someone give me some hints to localize/narrow this down a bit?
Thanks.
Thomas
P.S.: Similar was the power button (FF) on older kernels:
I did not get events/interrupts when pressing the button after resume any more. This seems to be fixed in 2.6.5. Thanks.
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
A message that is not in the archive (sent off-list or not yet received): 4086B8F0.1060400-smMupaH/[email protected]
Quoted 3 lines · Thomas Renninger
P.S.: Similar was the power button (FF) on older kernels:
I did not get events/interrupts when pressing the button after resume any more. This seems to be fixed in 2.6.5. Thanks.
Sorry I was wrong, I still load/unload the button module to get the it working after suspend.
-------------------------------------------------------
This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek For a limited time only, get FREE Ground shipping on all orders of $35 or more. Hurry up and shop folks, this offer expires April 30th!
http://www.thinkgeek.com/freeshipping/?cpg=12297