Hand with radeon 9000 / AGP / DRI
I've been playing around trying to get the most out of my Radeon 9000 pro with a 2.4.x kernel and I must admit that I've been somewhat disapointed. There are two things I've been trying to get to work properly:
1) RadeonFB
2) Direct rendering in X (needs DRI and AGP)
The first one actually works, but only if I set "mem=840MB" at startup (I've got 1GB.) Not sure I see why I need to give up some memory here. Maybe I'm just missing something ...
The second needs some tweaking before it can start being played with (http://marc.theaimsgroup.com/?l=linux-kernel&m=107073819005830&w=2).
But even then, it's not really stable. I just go in KDE's screensaver config menu, select "Flux (GL)"->Setup and try a few different types. Usually, but the time I've selected to preview a third type (regardless of the name, it's just any third), the machine simply hangs, and I have to hard reset. I'm not sure how this propagates down to the kernel in terms of calls/accesses, but it's really not an issue with time (i.e. leaving the screensaver run for a while will not cause any hangs,) it's an issue with changing the screensaver config a limited number of times, usually three times.
Here's some more info about the config:
- RedHat 9
- P4 2.4GHz with HT
- P4C800-Deluxe Asus board (intel 875 chipset)
- 1GB RAM
- Tried with a 2.4.26 with the above-mentioned patch
Anyone have something like this working?
Karim
Signature · 3 lines
Author, Speaker, Developer, Consultant Pushing Embedded and Real-Time Linux Systems Beyond the Limits http://www.opersys.com || [email protected] || 1-866-677-4546
Quoted 8 lines · Karim Yaghmour
I've been playing around trying to get the most out of my Radeon 9000 pro with a 2.4.x kernel and I must admit that I've been somewhat disapointed. There are two things I've been trying to get to work properly:
1) RadeonFB
2) Direct rendering in X (needs DRI and AGP)
Which driver are you using for OpenGL? The x11 (mesa) driver, or ATI's driver? ATI's driver doesn't play nice with radeonfb.
Also, telling radeonfb what resolution you want on the boot command line is broken if the res you request and the res reported by EDID disagree.
Quoted 1 line · Timothy Miller
Which driver are you using for OpenGL? The x11 (mesa) driver, or ATI's driver? ATI's driver doesn't play nice with radeonfb.
The X11 one. I used to use ATI's, but it didn't really give me any advantage over X11 (At least not that I could see.) So it went the way of "rpm -e".
Quoted 1 line
Also, telling radeonfb what resolution you want on the boot command line is broken if the res you request and the res reported by EDID disagree.
I'm not giving it any res at all as boot parm.
Karim
Signature · 3 lines
Author, Speaker, Developer, Consultant Pushing Embedded and Real-Time Linux Systems Beyond the Limits http://www.opersys.com || [email protected] || 1-866-677-4546