Skip to contentSkip to conversation

running multiple DVB cards successfully.. what do I need to know?? (major and minor numbers??)

DISCUSSION [email protected] 1 participant 1 message Feb 23, 2009 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Thanks Mike

Is this likely to stop the "Incorrect Readback of kernel version issue as well?"

cheers

Allan

On Mon Feb 23 17:57 , Michael Krufky sent:

Quoted 44 lines
Quoted 14 lines · On Mon, Feb 23, 2009 at 5:49 PM, [email protected] [email protected]>…

Some of you may have read some of my posts about an "incorrect firmware readback" message appearing in my dmesg, shortly after a tuner was engaged.

I have isolated this problem, but the workaround so far has not been pretty. On a hunch I removed my Dvico Fusion HDTV lite card from the system, running now only with the Dvico Fusion Dual Express.

The issue has gone, I am not getting the kdvb process hogging cpu cycles and this message has stopped.

I had tried both letting the kernel (or is it udev) assign the major and minor numbers and I had tried to manually set them via modprobe.conf (formerly modules.conf, I don't know if this is a global change or specific to Gentoo)....

Quoted 5 lines

I had the major number the same for both cards, with a separate minor number for each of the three tuners, this seems to be the same.

Is this how I should be setting up for 2 cards or should I be using some other type of configuration.

Allan,

I recommend to use the 'adapter_nr' module option. You can specify this option in modprobe.conf -- the name of this file is distro-specific.

For instance, to make the dual card appear before the lite card:

options cx23885 adapter_nr=0,1
options dvb-bt8xx adapter_nr=2

to make the lite card appear before the dual card:

options cx23885 adapter_nr=0
options dvb-bt8xx adapter_nr=1,2

I hope you find this helpful.

Regards,

Mike
)