Turning off LBA48
I'm running kernel 2.4.26, and I have a specific need to be able to turn off LBA48 support on a per-device basis. Specifically, I need such drives to appear with a capacity of ~137GB as they would if there were no LBA48 support. Below is a small patch that I applied to this kernel to accomplish the goal. Some cursory tests indicate that it works in my configuration, but I may have broken some taboos. I didn't know if there were non-obvious side effects to increasing the size of the ide_drive_t struct, so I renamed an existing and (apparently) unused flag. I also exposed a new kernel command line option ("hdx=nolba48"); this seems to add to a very small list, so obviously additions aren't taken lightly.
Does anyone else see value (or danger!) in this or a similar patch? The reason I need it: I use this machine to manipulate hard drives for other machines that aren't LBA48 aware. In the case of a >137GB, it's fine to let the machine (TiVo) just see the first 137GB.
Thanks!
Brad
drivers/ide/ide-disk.c 2004-05-01 12:20:42.000000000 -0500 renamed from drivers/ide/ide-disk.c 2004-04-30 18:29:50.000000000 -0500 +3 -0
@@ -1567,6 +1567,9 @@ if (HWIF(drive)->addressing) return 0; + if (drive->nolba48) + return 0; + if (!(drive->id->cfs_enable_2 & 0x0400)) return -EIO; drive->addressing = arg;
drivers/ide/ide.c 2004-05-01 00:50:48.000000000 -0500 renamed from drivers/ide/ide.c 2004-04-30 18:29:50.000000000 -0500 +0 -0
@@ -1821,7 +1821,7 @@ case HDIO_GET_NICE: return put_user(drive->dsc_overlap <<
IDE_NICE_DSC_OVERLAP |
- drive->atapi_overlap << IDE_NICE_ATAPI_OVERLAP |
+ /* drive->atapi_overlap << IDE_NICE_ATAPI_OVERLAP | */
drive->nice0 <<
IDE_NICE_0 |
drive->nice1 <<
IDE_NICE_1 |
drive->nice2 << IDE_NICE_2,
@@ -2070,6 +2070,7 @@
* "hdx=cdrom" : drive is present, and is a cdrom drive
* "hdx=cyl,head,sect" : disk drive is present, with specified geometry
* "hdx=noremap" : do not remap 0->1 even though EZD was detected
+ * "hdx=nolba48" : do not use lba48 even if hardware supports it
* "hdx=autotune" : driver will attempt to tune interface speed
* to the fastest PIO mode supported,
* if possible for this drive only.
@@ -2188,7 +2189,7 @@
const char *hd_words[] = {"none", "noprobe", "nowerr", "cdrom",
"serialize", "autotune", "noautotune", "slow", "swapdata", "bswap", "flash",
- "remap", "noremap", "scsi", NULL};
+ "remap", "noremap", "scsi", "nolba48", NULL};
unit = s[2] - 'a';
hw = unit / MAX_DRIVES;
unit = unit % MAX_DRIVES;
@@ -2254,6 +2255,9 @@
case -14: /* "scsi" */
drive->scsi = 1;
goto done;
+ case -15: /* "nolba48" */
+ drive->nolba48 = 1;
+ goto done;
case 3: /* cyl,head,sect */
drive->media = ide_disk;
drive->cyl = drive->bios_cyl = vals[0];
include/linux/ide.h 2004-05-01 12:58:13.000000000 -0500 renamed from include/linux/ide.h 2004-04-30 20:33:22.000000000 -0500 +1 -1
@@ -738,7 +738,7 @@ unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */ unsigned nobios : 1; /* do not probe bios for drive */ unsigned revalidate : 1; /* request revalidation */ - unsigned atapi_overlap : 1; /* ATAPI overlap (not supported) */ + unsigned nolba48 : 1; /* force lba48 off even if hardware supports it */ unsigned nice0 : 1; /* give obvious excess bandwidth */ unsigned nice2 : 1; /* give a share in our own
bandwidth */
unsigned doorlocking : 1; /* for removable only: door
lock/unlock works */