NAP problem

Bluez-users Jose Angel Rodriguez 2 participants 4 messages May 7, 2004 – May 8, 2004 1 message not in the archive Bluetooth drivers

lore

Share & tools

lore

Jose Angel Rodriguez

author

2004-05-07 11:39 UTC #0 lore raw

Hi all!!

I hava a Debian Sarge PC as a NAP for a bluetooth network. The computer is also connected to an ADSL.

This is my etc/network/interfaces file:

# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
auto lo
iface lo inet loopback

# The first network card - this entry was created during the Debian installation# (network, broadcast and gateway are optional) auto eth0
iface eth0 inet static

      address 192.168.0.2
      netmask 255.255.255.0
      network 192.168.0.0
      broadcast 192.168.0.255
      gateway 192.168.0.1

# bluetooth network server
iface bnep0 inet static
      address 10.0.0.1
      netmask 255.255.255.0

eth0 is the ADSL connection an bnep0 is the bluetooth connection.

My /etc/bluetooth/pan/dev-up file:
#!/bin/sh
ifup bnep0

I think everytime a client connects it runs /etc/bluetooth/pan/dev-up. Everything was working fine, but after updating packages with apt-get everytime a client connects I have to configure bnep0 interface by hand (ifup bnep0).

¿Does anybody know why /etc/bluetooth/pan/dev-up does not work now? ¿How can I configure bnep0 interface automaticaly?

Thanks in advance!!

JOSE

-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Marcel Holtmann

maintainer

2004-05-07 16:13 UTC #1 lore raw

Hi Jose,

Quoted 1 line

I hava a Debian Sarge PC as a NAP for a bluetooth network. The computer=

=20

Quoted 25 lines

is also connected to an ADSL.
=20
This is my etc/network/interfaces file:

# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
=20
# The loopback interface
auto lo
iface lo inet loopback
=20
# The first network card - this entry was created during the Debian=20
installation# (network, broadcast and gateway are optional)
auto eth0
iface eth0 inet static
       address 192.168.0.2
       netmask 255.255.255.0
       network 192.168.0.0
       broadcast 192.168.0.255
       gateway 192.168.0.1
=20
# bluetooth network server
iface bnep0 inet static
       address 10.0.0.1
       netmask 255.255.255.0
=20
eth0 is the ADSL connection an bnep0 is the bluetooth connection.

Quoted 8 lines

=20
My /etc/bluetooth/pan/dev-up file:
#!/bin/sh
ifup bnep0
=20
I think everytime a client connects it runs /etc/bluetooth/pan/dev-up.=20
Everything was working fine, but after updating packages with apt-get=20
everytime a client connects I have to configure bnep0 interface by hand=

=20

Quoted 3 lines

(ifup bnep0).
=20
=BFDoes anybody know why /etc/bluetooth/pan/dev-up does not work now? =BF=

How=20

Quoted 1 line

can I configure bnep0 interface automaticaly?

what about putting "auto bnep0" into the interfaces file ;)

Regards

Marcel

A message that is not in the archive (sent off-list or not yet received): [email protected]

Marcel Holtmann

maintainer

2004-05-07 23:31 UTC #3 lore raw

Hi Jose,

Quoted 1 line

Quoted 1 line
Quoted 1 line
I hava a Debian Sarge PC as a NAP for a bluetooth network. The comput=

er=20

Quoted 4 lines

Quoted 4 lines
Quoted 4 lines
is also connected to an ADSL.
This is my etc/network/interfaces file:
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8=

)

Quoted 20 lines

Quoted 20 lines
Quoted 20 lines
# The loopback interface
auto lo
iface lo inet loopback
# The first network card - this entry was created during the Debian=20 installation# (network, broadcast and gateway are optional) auto eth0
iface eth0 inet static
      address 192.168.0.2
      netmask 255.255.255.0
      network 192.168.0.0
      broadcast 192.168.0.255
      gateway 192.168.0.1
# bluetooth network server
iface bnep0 inet static
      address 10.0.0.1
      netmask 255.255.255.0

Quoted 7 lines

Quoted 7 lines
Quoted 7 lines
eth0 is the ADSL connection an bnep0 is the bluetooth connection.
My /etc/bluetooth/pan/dev-up file:
#!/bin/sh
ifup bnep0
I think everytime a client connects it runs /etc/bluetooth/pan/dev-up=

.=20

Quoted 1 line

Quoted 1 line
Quoted 1 line
Everything was working fine, but after updating packages with apt-get=

=20

Quoted 1 line

Quoted 1 line
Quoted 1 line
everytime a client connects I have to configure bnep0 interface by ha=

nd=20

Quoted 3 lines

Quoted 3 lines
Quoted 3 lines
(ifup bnep0).
=BFDoes anybody know why /etc/bluetooth/pan/dev-up does not work now?=

=BFHow=20

Quoted 8 lines

Quoted 6 lines
Quoted 3 lines
can I configure bnep0 interface automaticaly?
=20
what about putting "auto bnep0" into the interfaces file ;)
I tried this but it doesn't work. It was working fine with this=20 interfaces file, but now :-(

my fault, the auto is for the boot time. You don't need any extra stuff and you also don't need any PAN dev-up script. Check your hotplug installation why it is not working. It is not a BlueZ problem.

Quoted 1 line

=BFShould /etc/bluetooth/pan/dev-up run everytime a client connects? If=

I=20

Quoted 1 line

run that scrip manualy everythig works fine.

I don't know, because I never used it.

Regards

Marcel

Jose Angel Rodriguez

author

2004-05-08 08:46 UTC #4 lore raw

Quoted 67 lines · Marcel Holtmann

Hi Jose,
Quoted 36 lines
Quoted 36 lines
Quoted 36 lines
I hava a Debian Sarge PC as a NAP for a bluetooth network. The computer is also connected to an ADSL.
This is my etc/network/interfaces file:
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
auto lo
iface lo inet loopback
# The first network card - this entry was created during the Debian installation# (network, broadcast and gateway are optional) auto eth0
iface eth0 inet static
     address 192.168.0.2
     netmask 255.255.255.0
     network 192.168.0.0
     broadcast 192.168.0.255
     gateway 192.168.0.1
# bluetooth network server
iface bnep0 inet static
     address 10.0.0.1
     netmask 255.255.255.0
eth0 is the ADSL connection an bnep0 is the bluetooth connection.
My /etc/bluetooth/pan/dev-up file:
#!/bin/sh
ifup bnep0
I think everytime a client connects it runs /etc/bluetooth/pan/dev-up. Everything was working fine, but after updating packages with apt-get everytime a client connects I have to configure bnep0 interface by hand (ifup bnep0).
¿Does anybody know why /etc/bluetooth/pan/dev-up does not work now? ¿How can I configure bnep0 interface automaticaly?
Quoted 7 lines
Quoted 4 lines
what about putting "auto bnep0" into the interfaces file ;)
I tried this but it doesn't work. It was working fine with this interfaces file, but now :-(
my fault, the auto is for the boot time. You don't need any extra stuff and you also don't need any PAN dev-up script. Check your hotplug installation why it is not working. It is not a BlueZ problem.
Quoted 3 lines
¿Should /etc/bluetooth/pan/dev-up run everytime a client connects? If I run that scrip manualy everythig works fine.
I don't know, because I never used it.
Regards
Marcel

Quoted 12 lines

-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=dnemail3
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Thank you very much for your time and your help :-)

Jose