Skip to contentSkip to conversation

Are multiple output queues in qdisc possible?

LARTC [email protected] 2 participants 2 messages May 4, 2004 – May 7, 2004

lore
Share & tools
lore
#0 lore raw

Our system sets up multiple connections. At times, packets can be transmitted for some connections but not others.

With that in mind:

1. Is it possible to have multiple output queues in a qdisc, rather than one?

2. Can a packet that leaves qdisc be returned to qdisc if it cannot be transmitted?

If so, how?

Thank you.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 11 lines · [email protected] wrote:

Our system sets up multiple connections. At times, packets can be transmitted for some connections but not others.

With that in mind:

1. Is it possible to have multiple output queues in a qdisc, rather than one?

2. Can a packet that leaves qdisc be returned to qdisc if it cannot be transmitted?

If so, how?

Don't really know about 1.

2. - there is a requeue function in the queues in net/sched and a comment in sch_api.c -

---requeue

requeues once dequeued packet. It is used for non-standard or just buggy devices, which can defer output even if dev->tbusy=0.

I guess that gives a bit of hope.

Andy.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/