ip_conntrack_ftp
As read here :
http://www.sns.ias.edu/~jns/security/iptables/iptables_conntrack.html
modprobe ip_conntrack_ftp
would give me the ability to use active ftp if I have (pseudo/simplified code)
iptables -A FORWARD -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -j DROP
but I cant use active ftp, WHAT IS WRONG.. eth0 is the internal interface..
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 11 lines · raptor
As read here :
http://www.sns.ias.edu/~jns/security/iptables/iptables_conntrack.htmlmodprobe
ip_conntrack_ftp
would give me the ability to use active ftp if I have (pseudo/simplified code)iptables -A FORWARD -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -j DROP
but I cant use active ftp, WHAT IS WRONG.. eth0 is the internal interface..
If you are NATing use ip_nat_ftp aswell.
Not sure that that firewall rule is OK - but then I don't know what else you have.
My firewall is a direct copy and paste from one of rustys guides - ppp0 is my external interface -
## Create chain which blocks new connections, except if coming from inside.
iptables -N block
iptables -A block -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A block -m state --state NEW -i ! ppp0 -j ACCEPT iptables -A block -j DROP
## Jump to that chain from INPUT and FORWARD chains. iptables -A INPUT -j block
iptables -A FORWARD -j block
Andy.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
yep my config is very similar i.e. :
iptables -N block
iptables -A block -i $ifInt0 -j ACCEPT
iptables -A block -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A block -j DROP
iptables -A INPUT -i $ifWan0 -j services
iptables -A FORWARD -i $ifWan0 -j services
iptables -A INPUT -j block
iptables -A FORWARD -j block
I added also this (do I really need it in my config I'm allowing everything from inside anyway):
Quoted 1 line
iptables -A block -m state --state NEW -i ! $ifWan0 -j ACCEPT
after ESTABLISHED,RELATED but still can do active FTP
"services" is for giving access to wellknown services... I'm not using NAT
Quoted 28 lines · On Mon, 10 May 2004 21:37:27 +0100 Andy Furniss <[email protected]>…
Quoted 11 lines · raptor
As read here :
http://www.sns.ias.edu/~jns/security/iptables/iptables_conntrack.htmlmodprobe
ip_conntrack_ftp
would give me the ability to use active ftp if I have (pseudo/simplified code)iptables -A FORWARD -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -j DROP
but I cant use active ftp, WHAT IS WRONG.. eth0 is the internal interface..
If you are NATing use
ip_nat_ftpaswell.Not sure that that firewall rule is OK - but then I don't know what else you have.
My firewall is a direct copy and paste from one of rustys guides - ppp0 is my external interface -
## Create chain which blocks new connections, except if coming from inside.
iptables -N block
iptables -A block -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A block -m state --state NEW -i ! ppp0 -j ACCEPT iptables -A block -j DROP
Quoted 7 lines
## Jump to that chain from INPUT and FORWARD chains. iptables -A INPUT -j block
iptables -A FORWARD -j blockAndy.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 15 lines · raptor
yep my config is very similar i.e. :
iptables -N block
iptables -A block -i $ifInt0 -j ACCEPT
iptables -A block -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A block -j DROPiptables -A INPUT -i $ifWan0 -j services
iptables -A FORWARD -i $ifWan0 -j services
iptables -A INPUT -j block
iptables -A FORWARD -j blockI added also this (do I really need it in my config I'm allowing everything from inside anyway):
Quoted 7 lines
Quoted 1 line
iptables -A block -m state --state NEW -i ! $ifWan0 -j ACCEPT
after ESTABLISHED,RELATED but still can do active FTP
"services" is for giving access to wellknown services... I'm not using NAT
I am not sure what's wrong.
Are you running an FTP server or just trying to access one on the internet from behind the firewall ?
Andy.
<snip>
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
tryng to access ftp servers from inside...
Quoted 21 lines
Quoted 20 lines · raptor
yep my config is very similar i.e. :
iptables -N block
iptables -A block -i $ifInt0 -j ACCEPT
iptables -A block -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A block -j DROPiptables -A INPUT -i $ifWan0 -j services
iptables -A FORWARD -i $ifWan0 -j services
iptables -A INPUT -j block
iptables -A FORWARD -j blockI added also this (do I really need it in my config I'm allowing everything from inside anyway):
Quoted 1 line
iptables -A block -m state --state NEW -i ! $ifWan0 -j ACCEPT
after ESTABLISHED,RELATED but still can do active FTP
Quoted 8 lines
Quoted 2 lines
"services" is for giving access to wellknown services... I'm not using NAT
I am not sure what's wrong.
Are you running an FTP server or just trying to access one on the internet from behind the firewall ?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 1 line · raptor
tryng to access ftp servers from inside...
Well I am not sure - I would be double checking all scripts for typos/brainos. You haven't posted evrything you use - and even if you did I am no netfilter/firewalling expert. The netfilter list is probably a better place for this sort of issue.
Andy.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/