Skip to contentSkip to conversation

Urgent: Please help me about block port 80

DISCUSSION Patrick 3 participants 3 messages May 20, 2004 – May 21, 2004

lore
Share & tools
lore

Patrick

author
#0 lore raw

Dear sir/madam,

My goal is to allow only one IP(192.168.1.10) to access my server via port 80 or 8080 and forward all request from port 80 to port 8080.

What I do is as below.

*nat
:PREROUTING ACCEPT [1:48]
:POSTROUTING ACCEPT [3:230]
:OUTPUT ACCEPT [3:230]
-A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 8080 COMMIT
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:RH-Lokkit-0-50-INPUT - [0:0]
-A INPUT -j RH-Lokkit-0-50-INPUT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp -s 192.168.1.10/255.255.255.255 --dport 8080 --syn -j ACCEPT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp -s 192.168.1.10/255.255.255.255 --dport 80 --syn -j ACCEPT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 0:1023 --syn -j REJECT COMMIT

It seems that the port 80 and 8080 open to public after I add prerouting rule. Would you mind how I could acheive my goal? Thanks a lot.

Best regards,
Patrick

#1 lore raw
Quoted 26 lines · Patrick

Dear sir/madam,

My goal is to allow only one IP(192.168.1.10) to access my server via port 80 or 8080 and forward all request from port 80 to port 8080.

What I do is as below.

*nat
:PREROUTING ACCEPT [1:48]
:POSTROUTING ACCEPT [3:230]
:OUTPUT ACCEPT [3:230]
-A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 8080 COMMIT
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:RH-Lokkit-0-50-INPUT - [0:0]

(quoted diff) +0 -6
-A INPUT -j RH-Lokkit-0-50-INPUT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp -s 192.168.1.10/255.255.255.255
--dport 8080 --syn -j ACCEPT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp -s 192.168.1.10/255.255.255.255
--dport 80 --syn -j ACCEPT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 0:1023 --syn -j REJECT

COMMIT

Quoted 5 lines

It seems that the port 80 and 8080 open to public after I add prerouting rule. Would you mind how I could acheive my goal? Thanks a lot.

Best regards,
Patrick

Indeed, it looks like there's not much to keep them out! When you change the dport from 80 to 8080, it zips right around the one REJECT rule you have as would any UDP traffic or any TCP traffic above 1023 for that matter. I would suggest changing the INPUT and FORWARD policies to DROP rather than ACCEPT. This will drop everything that is not explicitly allowed. Right now, you are allowing everything that is not explicitly denied. I also normally set my OUTPUT policy to DROP as well. This way, in case someone does compromise my firewall, there is only so much they can do (unless, of course, they change the OUTPUT rules!). I would suggest perusing a good iptables tutorial such as Oskar Andreasson's (there's a link to it at http://www.netfilter.org). There is also a slide show on iptables in the training section at
http://iscs.sourceforge.net.
Good luck - John

Signature · 9 lines
John A. Sullivan III
Chief Technology Officer
Nexus Management
+1 207-985-7880
[email protected]
---
If you are interested in helping to develop a GPL enterprise class
VPN/Firewall/Security device management console, please visit
http://iscs.sourceforge.net 
#2 lore raw
In reply to Patrick
Quoted 26 lines · Patrick

Dear sir/madam,

My goal is to allow only one IP(192.168.1.10) to access my server via port 80 or 8080 and forward all request from port 80 to port 8080.

What I do is as below.

*nat
:PREROUTING ACCEPT [1:48]
:POSTROUTING ACCEPT [3:230]
:OUTPUT ACCEPT [3:230]
-A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 8080 COMMIT
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:RH-Lokkit-0-50-INPUT - [0:0]

(quoted diff) +0 -6
-A INPUT -j RH-Lokkit-0-50-INPUT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp -s 192.168.1.10/255.255.255.255
--dport 8080 --syn -j ACCEPT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp -s 192.168.1.10/255.255.255.255
--dport 80 --syn -j ACCEPT
-A RH-Lokkit-0-50-INPUT -p tcp -m tcp --dport 0:1023 --syn -j REJECT

COMMIT

Quoted 2 lines

It seems that the port 80 and 8080 open to public after I add prerouting rule. Would you mind how I could acheive my goal? Thanks a lot.

Ditch the lokkit. It is intended for *very* basic firewall configuration. What you want to do is rather simple, however it is above the "basic" level of usage lokkit is intended for. Mixing lokkit with hand-made configuration can screw things (or overwrite your configuration, I believe it inserts a comment in the file along the lines "do not hand edit"). Just remove everything with RH-Lokkit in it, and don't use lokkit utility.

In filter table, I'd probably change policy for all three builtin chains (INPUT, FORWARD, OUTPUT) to DROP. And than I'd insert the rules to allow only traffic that I want to allow. That way, anything that isn't explicitly allowed is droped. Which is (IMHO) better approach than patching the gaping holes. For example, this might be one way to rewrite filter table:

*filter
:INPUT DROP [0:0]
:FORWARD DROP [0:0]
:OUTPUT DROP [0:0]

# This will handle returning packets, etc
-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

# To allow unrestricted access from this machine uncomment line bellow

# or add more explicit rules to OUTPUT chain if you want to control
# what you allow to go out
# -A OUTPUT -m state --state NEW -j ACCEPT

# Now, allow only 80 and 8080 for 192.168.1.10
-A INPUT -s 192.168.1.10 -p tcp --dport 80 -m state --state NEW -j ACCEPT -A INPUT -s 192.168.1.10 -p tcp --dport 8080 -m state --state NEW -j ACCEPT

Note that above is just an idea. I'm not using anything similar to this (other than having default policies set to DROP), nor have I tested it.
So you might have to do some adjustments. I just typed this, so there
might be a typo or two (should be easy to catch ;-) ).

Signature · 3 lines
Aleksandar Milivojevic <[email protected]>    Pollard Banknote Limited
Systems Administrator                           1499 Buffalo Place
Tel: (204) 474-2323 ext 276                     Winnipeg, MB  R3T 1L7