Skip to contentSkip to conversation

xfs partition refuses to mount

DISCUSSION Vincent van de Camp 6 participants 10 messages May 29, 2004 – May 31, 2004

lore
Share & tools
lore
#0 lore raw

I run a gentoo system, and after updating python 2.3.3-r1, the emerge -DU that was running segfaulted. I had to hard reset the computer and since then the main (and only) partition refuses to mount.

The motherboard is an A7N8X Deluxe, with a Western Digital 36GB SATA Raptor drive. Kernel version was 2.6.5. The message:

XFS mounting filesystem ide2(33,1)
Starting XFS recovery on filesystem: ide2(33,1) (dev: ide2(33,1))
XFS assertion failed: *(uint *)dp == XFS_TRANS_HEADER_MAGIC, file: xfs_log_recover.c, line: 1424 kernel BUG at debug.c:55!
invalid operand: 0000
ohci1394 ieee1394 3c59x floppy serial isa-pnp usb-storage hid usb-ohci ehci-hcd usbcore

CPU:    0
EIP:    0010:[<c02c4f96>]    Not tainted
EFLAGS: 00010282
eax: 00000061   ebx: 00000001   ecx: 00000000   edx: f773c000
esi: f6d79780   edi: 00000034   ebp: 00000008   esp: f6de7b68
ds: 0018   es: 0018   ss: 0018
Process mount (pid: 2689, stackpage=f6de7000)
Stack: c04180e0 c0414be0 c03ed901 00000590 c029d43e c0414be0 c03ed901 00000590
       f7340720 f7c36260 f6d79774 00000008 c029f6e5 f7340720 f6d79780 
00000034
       f6d79780 00000020 f6d7a200 00000001 f7341200 f6de7c24 f73d1070 
00000011
Call Trace: [<c029d43e>]  [<c029f6e5>]  [<c02a04d5>]  [<c0308912>] [<c02a0dd4>]  [<c02a0e96>]  [<c02a10a4>]  [<c029735b>]  [<c02a523f>] [<c02b995a>]  [<c02a4782>]  [<c02b953c>]  [<c0294df0>]  [<c02ae54c>] [<c02c4151>]  [<c02c3f80>]  [<c01daea5>]  [<c01db87d>]  [<c01eaedb>] [<c01dbafb>]  [<c01ebcf1>]  [<c01ebf68>]  [<c01ebdef>]  [<c01ec2c8>] [<c01aaab3>]
Code: 0f 0b 37 00 6f f1 3e c0 83 c4 10 c3 89 f6 8b 0d e0 95 10 c0

If there's a separate xfs list, I'll be happy to post it there too.

Thanks,
Vincent

#1 lore raw
Quoted 27 lines · Vincent van de Camp

I run a gentoo system, and after updating python 2.3.3-r1, the emerge -DU that was running segfaulted. I had to hard reset the computer and since then the main (and only) partition refuses to mount.

The motherboard is an A7N8X Deluxe, with a Western Digital 36GB SATA Raptor drive. Kernel version was 2.6.5. The message:

XFS mounting filesystem ide2(33,1)
Starting XFS recovery on filesystem: ide2(33,1) (dev: ide2(33,1))
XFS assertion failed: *(uint *)dp == XFS_TRANS_HEADER_MAGIC, file: xfs_log_recover.c, line: 1424 kernel BUG at debug.c:55!
invalid operand: 0000
ohci1394 ieee1394 3c59x floppy serial isa-pnp usb-storage hid usb-ohci ehci-hcd usbcore

CPU:    0
EIP:    0010:[<c02c4f96>]    Not tainted
EFLAGS: 00010282
eax: 00000061   ebx: 00000001   ecx: 00000000   edx: f773c000
esi: f6d79780   edi: 00000034   ebp: 00000008   esp: f6de7b68
ds: 0018   es: 0018   ss: 0018
Process mount (pid: 2689, stackpage=f6de7000)
Stack: c04180e0 c0414be0 c03ed901 00000590 c029d43e c0414be0 c03ed901 00000590
       f7340720 f7c36260 f6d79774 00000008 c029f6e5 f7340720 f6d79780 
00000034
       f6d79780 00000020 f6d7a200 00000001 f7341200 f6de7c24 f73d1070 
00000011
Call Trace: [<c029d43e>]  [<c029f6e5>]  [<c02a04d5>]  [<c0308912>] [<c02a0dd4>]  [<c02a0e96>]  [<c02a10a4>]  [<c029735b>]  [<c02a523f>] [<c02b995a>]  [<c02a4782>]  [<c02b953c>]  [<c0294df0>]  [<c02ae54c>] [<c02c4151>]  [<c02c3f80>]  [<c01daea5>]  [<c01db87d>]  [<c01eaedb>] [<c01dbafb>]  [<c01ebcf1>]  [<c01ebf68>]  [<c01ebdef>]  [<c01ec2c8>] [<c01aaab3>]
Code: 0f 0b 37 00 6f f1 3e c0 83 c4 10 c3 89 f6 8b 0d e0 95 10 c0
Quoted 4 lines

If there's a separate xfs list, I'll be happy to post it there too.

Thanks,
Vincent

Added the XFS mailing list to the cc list....

You have turned on XFS debug, which is really a developer option. It looks like you have a corrupt journal though. A non debug kernel may still refuse to mount it and you would need to run xfs_repair from a rescue disk in that case.

Steve

#2 lore raw
Quoted 4 lines · Steve Lord

You have turned on XFS debug, which is really a developer option. It looks like you have a corrupt journal though. A non debug kernel may still refuse to mount it and you would need to run xfs_repair from a rescue disk in that case.

Unless xfs_repair has been changed recently, all it will be able to do it delete (zero) the journal. If it detects metadata in the journal, it'll stop and tell you mount the filesystem to replay the journal. Personally, I think that's sorta stupid... if I could mount the fs, I wouldn't be running xfs_repair. (I've had the journal become spooge on a sparc64 box a few times.)

There should be a way to instruct the kernel's rootfs mount to not look at the log. I don't know if one can pass any generic mount options at boot. ("ro"/"rw" and rootfs type, but I don't know of any others.) This would be handy for more than just xfs, btw.

--Ricky

#3 lore raw
Quoted 8 lines · Ricky Beam
Quoted 4 lines · Steve Lord

You have turned on XFS debug, which is really a developer option. It looks like you have a corrupt journal though. A non debug kernel may still refuse to mount it and you would need to run xfs_repair from a rescue disk in that case.

Quoted 6 lines

Unless xfs_repair has been changed recently, all it will be able to do it delete (zero) the journal. If it detects metadata in the journal, it'll stop and tell you mount the filesystem to replay the journal. Personally, I think that's sorta stupid... if I could mount the fs, I wouldn't be running xfs_repair. (I've had the journal become spooge on a sparc64 box a few times.)

Yes, xfs_repair will not replay a log, and if it finds dirty metadata in the log it wants you to replay it via mount. Having xfs_repair able to replay the log would be handy, but if mount cannot replay it, then repair will not either. xfs_repair -L bypasses this check and resets the log. Following that it does a complete consistancy check and fixup of metadata - it does a good job in most cases. Note that it deletes lost+found, and if you had files in there, they would be disconnected and get put back in lost+found again.

The whole reason for -L was customers who automatically ran xfs_repair after a crash, and hence threw away anything which was in the log. So it is more of a stop and think what you are doing option.

Quoted 6 lines

There should be a way to instruct the kernel's rootfs mount to not look at the log. I don't know if one can pass any generic mount options at boot. ("ro"/"rw" and rootfs type, but I don't know of any others.) This would be handy for more than just xfs, btw.

You can mount norecovery,ro - but no guarantees that it will stay up long. See Documentation/filesystems/xfs.txt for a list of xfs mount options.

Steve

#4 lore raw
Quoted 4 lines · Steve Lord

Yes, xfs_repair will not replay a log, and if it finds dirty metadata in the log it wants you to replay it via mount. Having xfs_repair able to replay the log would be handy, but if mount cannot replay it, then repair will not either.

Except xfs_repair can be a lot smarter in the process. I would never suggest putting 3MB worth of log recovery code in the kernel when it's likely to very be used. Such "fogiving" log recovery belongs in userland.

Quoted 3 lines

The whole reason for -L was customers who automatically ran xfs_repair after a crash, and hence threw away anything which was in the log. So it is more of a stop and think what you are doing option.

"Don't do that." *grin*

Quoted 8 lines
Quoted 4 lines

There should be a way to instruct the kernel's rootfs mount to not look at the log. I don't know if one can pass any generic mount options at boot. ("ro"/"rw" and rootfs type, but I don't know of any others.) This would be handy for more than just xfs, btw.

You can mount norecovery,ro - but no guarantees that it will stay up long. See Documentation/filesystems/xfs.txt for a list of xfs mount options.

I know I can tell the userland mount (/sbin/mount) to not replay the log. But I'm looking for a way to tell the kernel, at boot, to not replay the log. (digs through kernel) Ahh... 'rootflags=...' is what I'm looking for.

--Ricky

#5 lore raw
In reply to Ricky Beam

Hi Ricky,

Quoted 2 lines · Ricky Beam

(I've had the journal become spooge on a sparc64 box a few times.)

Until May 20 (just over a week ago) recovery on sparc64 (and big endian
64) did not work. A fix went into xfs_bit.c thanks to Nicolas Boullis. (Our XFS qa tests are routinely run on intel cpus)

--Tim

#6 lore raw
Quoted 8 lines · Tim Shimmin

Hi Ricky,

Quoted 2 lines · Ricky Beam

(I've had the journal become spooge on a sparc64 box a few times.)

Until May 20 (just over a week ago) recovery on sparc64 (and big endian
64) did not work. A fix went into xfs_bit.c thanks to Nicolas Boullis. (Our XFS qa tests are routinely run on intel cpus)

What about 64-bit little endian? I'm using XFS on Alpha, and it seems to be working. Is there something I should watch out for?

Signature · 2 lines
Måns Rullgård
[email protected]
#7 lore raw
Quoted 6 lines · Måns Rullgård
Quoted 3 lines

Until May 20 (just over a week ago) recovery on sparc64 (and big endian
64) did not work. A fix went into xfs_bit.c thanks to Nicolas Boullis. (Our XFS qa tests are routinely run on intel cpus)

What about 64-bit little endian? I'm using XFS on Alpha, and it seems to be working. Is there something I should watch out for?

64bit Little Endian is fine, it gets regular testing on Altix (IA64), I'm also testing 32bit Big Endian, so only 64bit BE was the problem.

#8 lore raw
In reply to Steve Lord

Thanks for the information. The debug option certainly was not intentional.
I have tried fsck.xfs, but that didn't do anything but print a version message. I haven't tried xfs_repair. I didn't know of it's existance. That's definately something to try out next time, though.

Thanks,
Vincent

Quoted 49 lines · Steve Lord
Quoted 27 lines · Vincent van de Camp

I run a gentoo system, and after updating python 2.3.3-r1, the emerge -DU that was running segfaulted. I had to hard reset the computer and since then the main (and only) partition refuses to mount.

The motherboard is an A7N8X Deluxe, with a Western Digital 36GB SATA Raptor drive. Kernel version was 2.6.5. The message:

XFS mounting filesystem ide2(33,1)
Starting XFS recovery on filesystem: ide2(33,1) (dev: ide2(33,1))
XFS assertion failed: *(uint *)dp == XFS_TRANS_HEADER_MAGIC, file: xfs_log_recover.c, line: 1424 kernel BUG at debug.c:55!
invalid operand: 0000
ohci1394 ieee1394 3c59x floppy serial isa-pnp usb-storage hid usb-ohci ehci-hcd usbcore

CPU:    0
EIP:    0010:[<c02c4f96>]    Not tainted
EFLAGS: 00010282
eax: 00000061   ebx: 00000001   ecx: 00000000   edx: f773c000
esi: f6d79780   edi: 00000034   ebp: 00000008   esp: f6de7b68
ds: 0018   es: 0018   ss: 0018
Process mount (pid: 2689, stackpage=f6de7000)
Stack: c04180e0 c0414be0 c03ed901 00000590 c029d43e c0414be0 c03ed901 00000590
       f7340720 f7c36260 f6d79774 00000008 c029f6e5 f7340720 f6d79780 
00000034
       f6d79780 00000020 f6d7a200 00000001 f7341200 f6de7c24 f73d1070 
00000011
Call Trace: [<c029d43e>]  [<c029f6e5>]  [<c02a04d5>]  [<c0308912>] [<c02a0dd4>]  [<c02a0e96>]  [<c02a10a4>]  [<c029735b>]  [<c02a523f>] [<c02b995a>]  [<c02a4782>]  [<c02b953c>]  [<c0294df0>]  [<c02ae54c>] [<c02c4151>]  [<c02c3f80>]  [<c01daea5>]  [<c01db87d>]  [<c01eaedb>] [<c01dbafb>]  [<c01ebcf1>]  [<c01ebf68>]  [<c01ebdef>]  [<c01ec2c8>] [<c01aaab3>]
Code: 0f 0b 37 00 6f f1 3e c0 83 c4 10 c3 89 f6 8b 0d e0 95 10 c0
Quoted 4 lines

If there's a separate xfs list, I'll be happy to post it there too.

Thanks,
Vincent

Added the XFS mailing list to the cc list....

You have turned on XFS debug, which is really a developer option. It looks like you have a corrupt journal though. A non debug kernel may still refuse to mount it and you would need to run xfs_repair from a rescue disk in that case.

Steve
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#9 lore raw
Quoted 4 lines · Vincent van de Camp

Thanks for the information. The debug option certainly was not intentional. I have tried fsck.xfs, but that didn't do anything but print a version message. I haven't tried xfs_repair. I didn't know of it's existance. That's definately something to try out next time, though.

fsck.xfs is a nop. It intentionally doesn't do anything... if you've reached a point where the filesystem *needs* to be checked and repaired, you don't want any part of it to be automated.

And most distro's these days will needlessly run fsck everytime it's been shutdown "improperly" (where "improperly" is defined as a file didn't get deleted.)

--Ricky