Skip to contentSkip to conversation

Transparent firewall

DISCUSSION Janos Makadi 3 participants 4 messages Jun 2, 2004 – Jun 3, 2004

lore
Share & tools
lore
#0 lore raw

Hi,

I have a problem, and I don`t know how to solve it.

What I would like to do is this:

I have a database server and I want to protect it. It has one nic connected to the local network. I want to setup a new linux box with two nics connected to the same ip network like this:

       ****        ****
 ------*  *--------*  *
       ****        ****

      Linux       RDBMS

Every traffic has to go through the Linux box, and filter out the unneded packets. I dont know how to config the linux to use the same ip network with this confoguration. Let me explain. For example the server has 10.1.0.5/255.255.255.0 address, and all the clients use this network config too. What ip addresses is allowed to use with the linux box? I mean can I use 10.1.0.4, 10.1.0.3 for the two nics at the linux box?

Any RTFM answers, with links is appreciated.

Thanks,

Janos Makadi

#1 lore raw

You want bridging. Start here: http://bridge.sourceforge.net/

jeremy jones

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Janos Makadi
Sent: Wednesday, June 02, 2004 2:10 PM
To: [email protected]
Subject: Transparent firewall

Hi,

I have a problem, and I don`t know how to solve it.

What I would like to do is this:

I have a database server and I want to protect it. It has one nic connected to the local network. I want to setup a new linux box with two

nics connected to the same ip network like this:

        ****        ****
  ------*  *--------*  *
        ****        ****

       Linux       RDBMS

Every traffic has to go through the Linux box, and filter out the unneded packets. I dont know how to config the linux to use the same ip network with this confoguration. Let me explain. For example the server has 10.1.0.5/255.255.255.0 address, and all the clients use this network

config too. What ip addresses is allowed to use with the linux box? I mean can I use 10.1.0.4, 10.1.0.3 for the two nics at the linux box?

Any RTFM answers, with links is appreciated.

Thanks,

Janos Makadi

#3 lore raw

We have a similar scheme between our LAN and the University-owned router, and we use proxy-arp instead of bridging (bridging wasnt available when we first started 3 years ago)

Cheers,
Terry.

Quoted 14 lines
Quoted 1 line · Jeremy Jones

You want bridging. Start here: http://bridge.sourceforge.net/

Thanks for the answers. I start reading and learning.

Regads,

Janos Makadi