toolchain

Hi,

I'm trying to compile u-boot 1.1.1 with 2.95.3 arm toolchain and I get following error:
make[1]: Leaving directory `/home/roaher/delo/xxcep/bootldr/tmp/u-boot/post/cpu'
...
arm-linux-gcc -Wa,-gstabs -D__ASSEMBLY__ -g -Os -fno-strict-aliasing

(quoted diff) +0 -4

-fno-common -ffixed-r8 -mshort-load-bytes -msoft-float -D__KERNEL__ 
-DTEXT_BASE=0xa3f00000 
-I/home/roaher/delo/xxcep/bootldr/tmp/u-boot/include -fno-builtin 
-ffreestanding -nostdinc -isystem 

/usr/lib/gcc-lib/i586-suse-linux/3.3.1/include -pipe -DCONFIG_ARM -D__ARM__ -mapcs-32 -march=armv4 -mtune=strongarm1100 -c -o cpu/pxa/start.o /home/roaher/delo/xxcep/bootldr/tmp/u-boot/cpu/pxa/start.S /home/roaher/delo/xxcep/bootldr/tmp/u-boot/cpu/pxa/start.S: Assembler messages:
/home/roaher/delo/xxcep/bootldr/tmp/u-boot/cpu/pxa/start.S:148: Error:
Internal_relocation (type 208) not fixed up (IMMEDIATE)
make: *** [cpu/pxa/start.o] Error 1
....

Compiling older version works just fine with this toolchain. I tried 3.3.2 and 3.3.3 toolchains from arm.nihilisme.ca but booth fail with some error about FP misuse.

What arm toolchain should I use with new u-boot?

regards, himba

-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.

Quoted 1 line

From Windows to Linux, servers to mobile, InstallShield X is the one

installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users