Samsung X10

Hi,

I am trying to install Debian Sid on a Samsung X10 laptop. ACPI is required to handled power management. The kernel I use is stock 2.6.6.

When I boot, I get the following messages (from a 'cat /var/log/messages | grep ACPI') :

Jun 24 15:56:34 etamine kernel:  BIOS-e820: 000000001ff70000 - 000000001ff7c000 (ACPI data)
Jun 24 15:56:34 etamine kernel:  BIOS-e820: 000000001ff7c000 - 000000001ff80000 (ACPI NVS)
Jun 24 15:56:34 etamine kernel: ACPI: RSDP (v000 SENSX                                     ) @ 0x000f7580
Jun 24 15:56:34 etamine kernel: ACPI: RSDT (v001 SENSX  AQUILA   0x06040000 SENS 0x00000000) @ 0x1ff77eda
Jun 24 15:56:34 etamine kernel: ACPI: FADT (v001 SENSX  SENSX10  0x06040000 SENS 0x00000050) @ 0x1ff7bf64
Jun 24 15:56:34 etamine kernel: ACPI: BOOT (v001 SENSX  $SBFTBL$ 0x06040000 SENS 0x00000001) @ 0x1ff7bfd8
Jun 24 15:56:34 etamine kernel: ACPI: SSDT (v001  INTEL  EISTRef 0x00002000 INTL 0x02012044) @ 0x1ff77f0a
Jun 24 15:56:34 etamine kernel: ACPI: DSDT (v001 SENSX  AQUILA   0x06040000 MSFT 0x0100000e) @ 0x00000000
Jun 24 15:56:34 etamine kernel: ACPI: PM-Timer IO Port: 0x1008
Jun 24 15:56:34 etamine kernel: ACPI: Subsystem revision 20040326
Jun 24 15:56:34 etamine kernel: ACPI: IRQ9 SCI: Edge set to Level Trigger.
Jun 24 15:56:34 etamine kernel: ACPI: Interpreter enabled
Jun 24 15:56:34 etamine kernel: ACPI: Using PIC for interrupt routing
Jun 24 15:56:34 etamine kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs *5)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 5) *0, disabled.
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
Jun 24 15:56:34 etamine kernel: ACPI: Embedded Controller [H_EC] (gpe 28)
Jun 24 15:56:34 etamine kernel:     ACPI-0347: *** Error: Handler for [EmbeddedControl] returned AE_BAD_PARAMETER
Jun 24 15:56:34 etamine kernel:     ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPCB.H_EC._REG] (Node c14e7e1c), AE_BAD_PARAMETER
Jun 24 15:56:34 etamine kernel: ACPI: Power Resource [PFAN] (on)
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
Jun 24 15:56:34 etamine kernel: ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
Jun 24 15:56:34 etamine kernel: PCI: Using ACPI for IRQ routing
Jun 24 15:56:35 etamine kernel:     ACPI-0347: *** Error: Handler for [EmbeddedControl] returned AE_BAD_PARAMETER
Jun 24 15:56:35 etamine kernel:     ACPI-1133: *** Error: Method execution failed [\_SB_.BAT1._STA] (Node c14eb51c), AE_AML_NO_RETURN_VALUE
Jun 24 15:56:35 etamine kernel:     ACPI-0347: *** Error: Handler for [EmbeddedControl] returned AE_BAD_PARAMETER
Jun 24 15:56:35 etamine kernel:     ACPI-1133: *** Error: Method execution failed [\_SB_.ADP1._PSR] (Node c14eb65c), AE_BAD_PARAMETER
Jun 24 15:56:35 etamine kernel: ACPI: Processor [CPU0] (supports C1 C2 C3, 8 throttling states)
Jun 24 15:56:35 etamine kernel: ACPI: Power Button (FF) [PWRF]
Jun 24 15:56:35 etamine kernel: ACPI: Lid Switch [LID0]
Jun 24 15:56:35 etamine kernel: ACPI: Sleep Button (CM) [SLPB]
Jun 24 15:56:35 etamine kernel: ACPI: Fan [FAN0] (on)
Jun 24 15:56:35 etamine kernel:     ACPI-0347: *** Error: Handler for [EmbeddedControl] returned AE_BAD_PARAMETER
Jun 24 15:56:35 etamine kernel:     ACPI-1133: *** Error: Method execution failed [\_TZ_.THRM._TMP] (Node c14eb8dc), AE_BAD_PARAMETER

The system boots up, but for example the battery is not recognized...

Any hint ?

Thanks,

Franck

-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com