Please document this
Stephen,
This REALLY needs to be fixed in the code; tc should reject as a syntax error any "add filter" command that does not include a "prio" parameter. It also needs to be documented.
== From LARTC mailing list => Dear list,
Quoted 10 lines
After much code crunching and beating my head against the wall
(literally), I discovered the faulty code. Thanks mostly to gypsy who played a huge role in helping me discover the problem. My tc filter line had an error in it which completely baffles me because it worked up until 2045 lines were entered.Old command:
tc filter add dev $dev protocol ip parent 12: u32 ht 2:$table1: ht 3:$table2: match ip dst $ip/32 flowid 12:$classid
Quoted 5 lines
New command:
tc filter add dev $dev protocol ip parent 12: prio 5 u32 ht 2:$table1:
ht 3:$table2: match ip dst $ip/32 flowid 12:$classidWho would have thought that a prio would cause that much trouble?
Thanks,
gypsy
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/