Skip to contentSkip to conversation

arm64: dts: rockchip: add dsi controller for px30

PATCH In review Heiko Stuebner 1 participant 3 messages Jan 6, 2020

Subsystems (2)
lore
Share & tools
lore

Heiko Stuebner

author maintainer
#0 lore raw

PATCH v2 1/2 arm64: dts: rockchip: add dsi controller for px30

From: Heiko Stuebner <[email protected]>

This adds the dw-mipi-dsi controller and hooks it into the display-subsystem on px30.

---
changes in v2:
- move reset properties into correct order
- drop dsiphy node, already added by another patch

 arch/arm64/boot/dts/rockchip/px30.dtsi | 48 ++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)
arch/arm64/boot/dts/rockchip/px30.dtsi +48 -0
index 5b5ca7ff6674..986ed249a733 100644
@@ -955,6 +955,44 @@ gpu: gpu@ff400000 {
 		status = "disabled";
 	};
 
+	dsi: dsi@ff450000 {
+		compatible = "rockchip,px30-mipi-dsi";
+		reg = <0x0 0xff450000 0x0 0x10000>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_MIPI_DSI>;
+		clock-names = "pclk";
+		phys = <&dsi_dphy>;
+		phy-names = "dphy";
+		power-domains = <&power PX30_PD_VO>;
+		resets = <&cru SRST_MIPIDSI_HOST_P>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dsi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_dsi>;
+				};
+
+				dsi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_dsi>;
+				};
+			};
+		};
+	};
+
 	vopb: vop@ff460000 {
 		compatible = "rockchip,px30-vop-big";
 		reg = <0x0 0xff460000 0x0 0xefc>;
@@ -972,6 +1010,11 @@ vopb: vop@ff460000 {
 		vopb_out: port {
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			vopb_out_dsi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi_in_vopb>;
+			};
 		};
 	};
 
@@ -1004,6 +1047,11 @@ vopl: vop@ff470000 {
 		vopl_out: port {
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			vopl_out_dsi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi_in_vopl>;
+			};
 		};
 	};
 
Signature · 1 line
2.24.1
author maintainer
#1 lore raw

PATCH v2 2/2 arm64: dts: rockchip: hook up the px30-evb dsi display

From: Heiko Stuebner <[email protected]>

Create the necessary display nodes to activate the Xingpeng XPP055C272 dsi display that can be found on the px30-evb.

---
 arch/arm64/boot/dts/rockchip/px30-evb.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
arch/arm64/boot/dts/rockchip/px30-evb.dts +16 -0
index 180995a590c1..fa21da5d9268 100644
@@ -112,6 +112,22 @@ &display_subsystem {
 	status = "okay";
 };
 
+&dsi {
+	status = "okay";
+
+	panel@0 {
+		compatible = "xinpeng,xpp055c272";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		vci-supply = <&vcc3v3_lcd>;
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
 &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;
Signature · 1 line
2.24.1