IMQ on 2.6.x + iptraf = problem
Hi Bety, a problem like this was reported on IMQ mailling list a couple of weeks ago. It is still pending review but it must be somehow related
to iptraf. :-|
I'm sorry for not being able to give you some "positive" advice on it for now.
Tks for reporting this issue. If you need assistance feel free to write me privately or to join our list at www.linuximq.net
Cheers
Andre
Quoted 36 lines · [email protected] wrote:
Does anybody have the following problem?
Affected:
IMQ interfaces with --todev target on PREROUTING chain appear only on 2.6.x kernels (2.4.x working good)Counters on PREROUTING chain working good (with iptraf sniffing on any interface), but imq interfaces lost TCP packets which are forwarded from the internet to the network behind router (only TCP; the rest of traffic like icmp, udp is ok).
Try to make two imq interfaces on your internet interface and download file (via ftp, www or somtging else), NOT from your internet router but from computer behind NAT (behind router) and then enable iptraf. Because for router traffic everything working fine.
your computer --- router (with nat, imq and iptraf) --- imq0, and imq1 --- internet interface --- Internet
configuration:
iptables -F
iptables -X
iptables -Z
iptables -F -t nat
iptables -X -t nat
iptables -F -t mangle
iptables -X -t mangleiptables -P FORWARD ACCEPT
iptables -P INPUT ACCEPT
iptables -P OUTPUT ACCEPTiptables -t nat -A POSTROUTING -s $i -o $INTERNET_ETH -d 0/0 -j SNAT --to $INTERNET_IP
Quoted 9 lines
# Download iptables -t mangle -A PREROUTING -i $INTERNET_ETH -j IMQ --todev 0 # Upload iptables -t mangle -A POSTROUTING -o $INTERNET_ETH -j IMQ --todev 1ip link set imq0 up
ip link set imq1 up
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/