Skip to contentSkip to conversation

C3 on Travelmate 8000

DISCUSSION Daniel Jasper 2 participants 2 messages Sep 5, 2004 – Sep 6, 2004 1 message not in the archive ACPI

lore
Share & tools
lore
#0 lore raw

Hi,

on my Travelmate 8005 (with Pentium M - Dothan) there is constant bus master activity. I already tried to disable USB, PCMCIA, Network, Framebuffer, Cpufreq etc., but even with a minimalistic system there ist still the following output of /proc/acpi/processor/CPU0/power:

active state:            C2
default state:           C1
bus master activity:     ffffffff

states:
C1: promotion[C2] demotion[--] latency[000]
usage[00000010]
*C2: promotion[C3] demotion[C1] latency[001]
usage[00901857]
C3: promotion[--] demotion[C2] latency[085]
usage[00000000]

Is there anything else I can do? Or can I somehow find out, what is causing the bus master activity? Disabling the bm_check=1 in the processor.c code works, but that is probably the wrong solution.

-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=5047&alloc_id=10808&op=click

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw
Quoted 13 lines

on my Travelmate 8005 (with Pentium M - Dothan) there is constant bus master activity. I already tried to disable USB, PCMCIA, Network, Framebuffer, Cpufreq etc., but even with a minimalistic system there ist still the following output of /proc/acpi/processor/CPU0/power:

active state:            C2
default state:           C1
bus master activity:     ffffffff

states:
C1: promotion[C2] demotion[--] latency[000]
usage[00000010]
*C2: promotion[C3] demotion[C1] latency[001]
usage[00901857]
C3: promotion[--] demotion[C2] latency[085]
usage[00000000]

Quoted 1 line

Is there anything else I can do? Or can I somehow find out, what is causing the bus master activity? Disabling the bm_check=1 in the processor.c code works, but that is probably the wrong solution.

You should check the processor/chipset errata ("specification update" in Intel-language). Perhaps the BM status register is broken on your particular chipset.

Signature · 8 lines
Nate


-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=5047&alloc_id=10808&op=click