Skip to contentSkip to conversation

bio too big device md0 (248 > 200) (2.6.9-rc2-mm1)

RAID1 Bug Raphaël Rigo 2 participants 3 messages Sep 19, 2004 – Sep 20, 2004

lore
Share & tools
lore
#0 lore raw

Hello,
kernel version : 2.6.9-rc2-mm1
i'm using a RAID1 array over 2 disks : one ATA, and another one in "SATA" (if we can call the ICH5 a real SATA controller). During array synchronisation, I get "bio too big device md0 (248 > 200)" error, which I fixed in doing //#define RESYNC_BLOCK_SIZE (64*1024)
#define RESYNC_BLOCK_SIZE PAGE_SIZE
in raid1.c, following the instruction on an old thread (for kernel 2.6.0).
I would like to know if there is any better fix now, else then this mail
will act as a remainder ;)

Raphaël Rigo

#1 lore raw
Quoted 11 lines · On Monday September 20, [email protected] wrote:

Hello,
kernel version : 2.6.9-rc2-mm1
i'm using a RAID1 array over 2 disks : one ATA, and another one in "SATA" (if we can call the ICH5 a real SATA controller). During array synchronisation, I get "bio too big device md0 (248 > 200)" error, which I fixed in doing
//#define RESYNC_BLOCK_SIZE (64*1024)
#define RESYNC_BLOCK_SIZE PAGE_SIZE
in raid1.c, following the instruction on an old thread (for kernel 2.6.0). I would like to know if there is any better fix now, else then this mail
will act as a remainder ;)

This is not (as far as I can tell) a raid1 bug.

bio too big device md0

means that someone sent a request to md0 that was too large. (124K instead of the max 100K).

raid1 never does that. It send requests to the underlying devices. So if you make your raid1 from hde and sda, then a message like
bio to big device sda
might indicate a problem with raid1.

Are you sure you quoted the error message correctly? If you, how was the array being used? What filesystem?

NeilBrown

#2 lore raw
Quoted 28 lines · Neil Brown
Quoted 9 lines · On Monday September 20, [email protected] wrote:

Hello,
kernel version : 2.6.9-rc2-mm1
i'm using a RAID1 array over 2 disks : one ATA, and another one in "SATA" (if we can call the ICH5 a real SATA controller). During array synchronisation, I get "bio too big device md0 (248 > 200)" error, which I fixed in doing //#define RESYNC_BLOCK_SIZE (64*1024)
#define RESYNC_BLOCK_SIZE PAGE_SIZE
in raid1.c, following the instruction on an old thread (for kernel 2.6.0).
I would like to know if there is any better fix now, else then this mail
will act as a remainder ;)

This is not (as far as I can tell) a raid1 bug.

bio too big device md0

means that someone sent a request to md0 that was too large. (124K instead of the max 100K).

raid1 never does that. It send requests to the underlying devices. So if you make your raid1 from hde and sda, then a message like
bio to big device sda
might indicate a problem with raid1.

Are you sure you quoted the error message correctly? If you, how was the array being used? What filesystem?

Quoted 6 lines

NeilBrown
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Is I am sure I did the right quote (copy paste from kern.log).
The array was being recovered (it is a newly created array), copying from hda to sda. The filesystem used is ext3. Btw the first number in the message did vary.

I did the modification in raid1.c based on this mail you wrote :
http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&frame=right&th=69e566d020ab2da6&seekm=Pine.LNX.4.58.0312232253140.7841%40infocalypse.jimlawson.org.lucky.linux.kernel#link5

Hope this helps,

Raphaël Rigo