Skip to contentSkip to conversation

Operation When LCD Projector Off

DISCUSSION Kathleen Rose 3 participants 4 messages Jun 13, 2010 – Jun 15, 2010

lore
Share & tools
lore
#0 lore raw

Hi,

Does the intel driver support having an LCD projector as the only monitor? I am trying to run Ubuntu 10.04 with an LCD projector attached to the HDMI port. If the projector is in Standby mode, the X-window system will not start. If the projector is on, the X-window system starts.

thanks

Kathleen Rose

#1 lore raw

Hi Folks,

Any word on this? Is there a way to tell the intel driver to continue on, even though it doesn't detect a monitor? Like NVidia's ConnectedMonitor xorg.conf option?

thanks

Kathleen Rose

-----Original Message-----

Hi,

Does the intel driver support having an LCD projector as the only monitor? I am trying to run Ubuntu 10.04 with an LCD projector attached to the HDMI port. If the projector is in Standby mode, the X-window system will not start. If the projector is on, the X-window system starts.

thanks

Kathleen Rose

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

#2 lore raw

Hi Kathleen,

I have understood that if you configure those items then you should be able to boot with the LCD projector off.

I wanted to achieve the same thing with my TV but didn't had time to test.

TV_FORMAT - output standard
       This property allows you to control the output standard used on your TV output port.   You  can  select  between  NTSC-M, NTSC-443, NTSC-J, PAL-M, PAL-N, and PAL.

TV_Connector - connector type
       This  config  option  should  be  added to xorg.conf TV monitor's section, it allows you to force the TV output connector type, which bypass load detect and TV will always be taken as connected. You can select between  S-Video,  Composite  and Component.

I think you should just configure something like:
        Option          "TV_Connector"          "Component" in your Monitor section.

Let us know if this worked.

thanks
Xavier

________________________________
De : Kathleen Rose <[email protected]>
À : [email protected]
Envoyé le : Mar 15 juin 2010, 17h 04min 22s Objet : Re: [Intel-gfx] Operation When LCD Projector Off

Hi Folks,

Any word on this? Is there a way to tell the intel driver to continue on, even though it doesn't detect a monitor? Like NVidia's ConnectedMonitor xorg.conf option?

thanks

Kathleen Rose

-----Original Message-----

Hi,

Does the intel driver support having an LCD projector as the only monitor? I am trying to run Ubuntu 10.04 with an LCD projector attached to the HDMI port. If the projector is in Standby mode, the X-window system will not start. If the projector is on, the X-window system starts.

thanks

Kathleen Rose

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw
In reply to Kathleen Rose
Quoted 6 lines · Kathleen Rose

Hi Folks,

Any word on this? Is there a way to tell the intel driver to continue on, even though it doesn't detect a monitor? Like NVidia's ConnectedMonitor xorg.conf option?

This will be resolved in the Xserver 1.9 release, which has a patch to bring up a dummy framebuffer if there are no connected displays and the driver can grow the framebuffer at runtime (the Intel driver can).

That doesn't help you very much, I'm afraid, but what you want will Just Work™ (in Maverick, which will become Ubuntu 10.10) soon!

Quoted 22 lines

thanks

Kathleen Rose

-----Original Message-----

Hi,

Does the intel driver support having an LCD projector as the only monitor? I am trying to run Ubuntu 10.04 with an LCD projector attached to the HDMI port. If the projector is in Standby mode, the X-window system will not start. If the projector is on, the X-window system starts.

thanks

Kathleen Rose

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx