objcopy stalled, large binary size for sc520 based board
I have the same problem as Sreedhar Payavala had back in June.
I am porting sc520_cdp and sc520_spunk to my sc520 based board. I had several issues relating to differences between versions of gcc and ld. I fixed them and then got stuck for a while with this ld error:
ld: section .data [00000000387d4de4 -> 00000000387d5a76] overlaps section .rodata.str1.1 [00000000387d4de4 -> 00000000387d9aca]
ld: section .realmode [00000000387d5a77 -> 00000000387d5bdc] overlaps section .rodata.str1.1 [00000000387d4de4 -> 00000000387d9aca]
ld: section .bios [00000000387d5bdd -> 00000000387d611a] overlaps section .rodata.str1.1 [00000000387d4de4 -> 00000000387d9aca]
make: *** [u-boot] Error 1
I added the command line argument --no-check-sections to LDFLAGS in config.mk and this problem went away (perhaps).
Now I have a problem with objcopy, objcopy never ends and uses massive amounts of memory. If I ctrl-c, and check the output files I see:
rwxrwxr-x 1 root root 594727 Sep 29 13:12 u-boot
I am using ld version "GNU ld version 2.14.90.0.8 20040114" and gcc version "gcc (GCC) 3.3.4 20040623"
If anyone can help, it would be appreciated.
regards,
Aras Vaichas
Quoted 11 lines · In message <[email protected]> you wrote:
then got stuck for a while with this ld error:
ld: section .data [
00000000387d4de4->00000000387d5a76] overlaps section .rodata.str1.1 [00000000387d4de4->00000000387d9aca]
ld: section .realmode [00000000387d5a77->00000000387d5bdc] overlaps section .rodata.str1.1 [00000000387d4de4->00000000387d9aca]
ld: section .bios [00000000387d5bdd->00000000387d611a] overlaps section .rodata.str1.1 [00000000387d4de4->00000000387d9aca]
make: *** [u-boot] Error 1
Quoted 2 lines
I added the command line argument --no-check-sections to LDFLAGS in config.mk and this problem went away (perhaps).
This is definitely a BAD idea. Instead of shutting off the error messages you should fix the obvious problems in the linker script.
Quoted 1 line
If anyone can help, it would be appreciated.
Fix the linker script.
Best regards,
Wolfgang Denk
Signature · 5 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de The ideal situation is to have massive computing power right at home. Something that dims the streetlights and shrinks the picture on the neighbours' TVs when you boot it up.