Compaq Evo 410
Hi All,
I've just installed SuSE 9.1 and with the 2.6.4.51(52?) kernel that comes with it, my Evo n410c does lots of breaking.
Basically, none of the fans are found and it just gets really hot before powering down.
I've read Hugo's page at Larve.net, but that seems to be over a year old. I'm going to try an updated bios, but I'm wondering if anybody has a working dsdt for this box?
Also, do the instructions (acpidump,disasemble,fix,reassemble,merge,compile) still apply for 2.6 kernels?
I know less about ASM than I do about Islands in the Pacific - would anybody be able to assist?
All the best,
Signature · 15 lines
George Barnett Reality Engineer & Explorer e: [email protected] m: +44 778 884 7205 Things must be as they may - William Shakespear, Henry V ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi!
Quoted 3 lines
I've read Hugo's page at Larve.net, but that seems to be over a year old. I'm going to try an updated bios, but I'm wondering if anybody has a working dsdt for this box?
I have evo560 (?), and it had fan problems, too. After bios update and with new acpi, it works better. Still acpid sometimes spins making machine hardly usable.
Signature · 9 lines
64 bytes from 195.113.31.123: icmp_seq=28 ttl=51 time=448769.1 ms ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl