Skip to contentSkip to conversation

2.6.9-rc3 software suspend (pmdisk) stopped working

DISCUSSION Mitch DSouza 2 participants 2 messages Oct 1, 2004 – Oct 2, 2004

lore
Share & tools
lore
#0 lore raw

Thanks Pavel,

I thought i was going barmy. I've reverted back to -rc2 which pmdisk works flawlessly on my laptop.

Thanks
Mitch

-------- Original Message --------
Subject: Re: 2.6.9-rc3 software suspend (pmdisk) stopped working
Date: Fri, 1 Oct 2004 12:23:51 +0200
From: Pavel Machek <[email protected]>
To: Mitch <[email protected]>
CC: [email protected]
References: <[email protected]>

Hi!

Quoted 10 lines

Anyone noticed that pmdisk software suspend stopped working in -rc3 ? In -rc2 it worked just fine. My script was

chvt 1
echo -n shutdown >/sys/power/disk
echo -n disk >/sys/power/state
chvt 7

In -rc3 it appears to write pages out to disk, but never shuts down the machine. Is there something else i need to do or am missing ?

You are not missing anything, it is somehow broken. I'll try to find out what went wrong and fix it. In the meantime, look at -mm series, it works there.
Pavel

#1 lore raw

Hi!

Quoted 2 lines

I thought i was going barmy. I've reverted back to -rc2 which pmdisk works flawlessly on my laptop.

Actually problem turned out to be in highmem. Unless you are using highmem, -rc3 should work. You'll need to change config if switching from pmdisk to swsusp...

Pavel

Signature · 1 line
64 bytes from 195.113.31.123: icmp_seq=28 ttl=51 time=448769.1 ms